Parameter determination for modeling system transients - Part IV: Rotating machines

IEEE Transactions on Power Delivery

Volumn 20, Issue 3, 2005, Pages 2063-2072

  Martinez, J A ^a   Johnson, B ^a   Grande Moran, C ^a   Durbak, D ^a   Gustavsen, B ^a   Mahseredjian, J ^a   Mork, B ^a   Walling, R ^a  

^a NONE

Author keywords

Induction machines; Modeling; Power system transients; Simulation; Synchronous machines

Indexed keywords

CALCULATIONS; COMPUTER SIMULATION; ELECTRIC FREQUENCY MEASUREMENT; ELECTRIC POWER SYSTEMS; MATHEMATICAL MODELS; ROTATING MACHINERY; STANDARDS; SYNCHRONOUS MACHINERY; TRANSIENTS;

ELECTRICAL PARAMETERS; MODELING SYSTEM TRANSIENTS; PARAMETER DETERMINATION; POWER SYSTEM TRANSIENTS;

ASYNCHRONOUS MACHINERY;

EID: 23944441122     PISSN: 08858977     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPWRD.2005.848725     Document Type: Article

References (44)

1. CIGRE WG 33.02, Guidelines for representation of network elements when calculating transients, in CIGRE Brochure 39, 1990.
2. IEEE Guide: Test Procedures for Synchronous Machines, IEEE Std. 115, 1995.
3. IEEE Guide: Test Procedure for Polyphase Induction Motors and Generators, IEEE Std. 112, 1996.
4. H. W. Dommel, ElectroMagnetic Transients Program. Reference Manual (EMTP Theory Book). Portland, OR: Bonneville Power Administration, 1986.
5. J. R. Marti and K. W. Louie, "A phase-domain synchronous generator model including saturation effects," IEEE Trans. Power Syst., vol. 12, no. 1, pp. 222-229, Feb. 1997.
6. IEEE Guide for Synchronous Generator Modeling Practices in Stability Studies, IEEE Std. 1110, 1991.
7. I. M. Canay, "Modeling of alternating-current machines having multiple rotor circuits," IEEE Trans. Energy Convers., vol. 8, no. 2, pp. 280-296, Jun. 1993.
8. Rotating Electrical Machines - Part 4: Methods for Determining Synchronous Machine Quantities from Tests, IEC 60034-4, 1985.
9. I. M. Canay, "Determination of model parameters of synchronous machines," Proc. Inst. Elect. Eng. B, vol. 130, no. 2, pp. 86-94, Mar. 1983.
10. A. Keyhani and H. Tsai, "Identification of high-order synchronous generator models from SSFR test data," in Proc. IEEE/PES Winter Meeting, Paper no. 94 WM 022-4 EC, New York, Jan. 30-Feb. 3, 1994.
11. S. Henschel and H. W. Dommel, "Noniterative synchronous machine parameter identification from frequency response tests," IEEE Trans. Power Syst., vol. 14, no. 2, pp. 553-560, May 1999.
12. J. Verbeek, R. Pintelon, and P. Guillaume, "Determination of synchronous machine parameters using network synthesis techniques," IEEE Trans. Energy Convers., vol. 14, no. 3, pp. 310-314, Sep. 1999.
13. B. Gustavsen and A. Semlyen, "Rational approximation of frequency domain responses by vector fitting," IEEE Trans. Power Del., vol. 14, no. 3, pp. 1052-1061, Jul. 1999.
14. IEEE PES WG 12, "Experience with standstill frequency response (SSFR) testing and analysis of salient pole synchronous machines," IEEE Trans. Energy Convers., vol. 14, no. 4, pp. 1209-1217, Dec. 1999.
15. D. Y. Park et al., "Standstill frequency-response testing and modeling of salient-pole synchronous machines," IEEE Trans. Energy Convers., vol. 13, no. 3, pp. 230-236, Sep. 1998.
16. R.M. Sanders, "Standstill frequency-response methods and salient pole synchronous machines," IEEE Trans. Energy Convers., vol. 14, no. 4, pp. 1033-1037, Dec. 1999.
17. P. M. Anderson, B. L. Agrawal, and J. E. Van Ness, Subsynchronous Resonance in Power Systems. New York: IEEE Press, 1990.
18. I.M. Canay, "Determination of the model parameters of machines from the reactance operators xd(p), xq(p) (Evaluation of standstill frequency response test)," IEEE Trans. Energy Convers., vol. 8, no. 2, pp. 272-279, Jun. 1993.
19. P. L. Dandeno, P. Kundur, A. T. Poray, and H. M. Zein El-din, "Adaptation and validation of turbogenerator model parameters through on-Line frequency response measurements," IEEE Trans. Power App. Syst., vol. PAS-100, no. 4, pp. 1656-1664, Apr. 1981.
20. F. P. de Mello, L. N. Hannett, and J. R. Willis, "Determination of synchronous machine stator and field leakage inductances standstill frequency response tests," IEEE Trans. Power Syst., vol. 3, no. 4, pp. 1625-1632, Nov. 1988.
21. H. Tsai, A. Keyhani, J. Demcko, and R. G. Farmer, "On-line synchronous machine parameter estimation from small disturbance operating data," IEEE Trans. Energy Convers., vol. 10, no. 1, pp. 25-36, Mar. 1995.
22. R. Wamkeue, I. Kamwa, X. Daï-Do, and A. Keyhani, "Iteratively reweighted least squares for maximum likelihood identification of synchronous machine parameters from on-line tests," IEEE Trans. Energy Convers., vol. 14, no. 2, pp. 159-166, Jun. 1999.
23. V. Brandwajn, "Representation of magnetic saturation in the synchronous machine model in an electromagnetic transients program," IEEE Trans. Power App. Syst., vol. PAS-99, no. 5, pp. 1996-2002, Sep./Oct. 1980.
24. I. Boldea and S. A. Nasar, "A general equivalent circuit (GEC) of electric machines including crosscoupling saturation and frequency effects," IEEE Trans. Energy Convers., vol. 3, no. 3, pp. 689-695, Sep. 1988.
25. A. M. El-Serafi, A. S. Abdallah, M. E. El-Sherbiny, and E. H. Badawy, "Experimental study of the saturation and the cross-magnetizing phenomenon in saturated synchronous machines," IEEE Trans. Energy Convers., vol. 3, no. 4, pp. 815-823, Dec. 1988.
26. A.M. El-Serafi and A. S. Abdallah, "Effect of saturation on the steady state stability of a synchronous machine connected to an infinite bus system," IEEE Trans. Energy Convers., vol. 6, no. 3, pp. 514-521, Sep. 1991.
27. S. A. Tahan and I. Kamwa, "A two-factor saturation model for synchronous machines with multiple rotor circuits," IEEE Trans. Energy Convers., vol. 10, no. 4, pp. 609-616, Dec. 1995.
28. E. Levi, "Modeling of magnetic saturation in smooth air-gap synchronous machines," IEEE Trans. Energy Convers., vol. 12, no. 2, pp. 151-156, Jun. 1997.
29. E. Levi, "Saturation modeling in d-q axis models of salient pole synchronous machines," IEEE Trans. Energy Convers., vol. 14, no. 1, pp. 44-50, Mar. 1999.
30. J. Verbeeck, R. Pintelon, and P. Lataire, "Influence of saturation on estimated synchronous machine parameters in standstill frequency response tests," IEEE Trans. Energy Convers., vol. 15, no. 3, pp. 377-283, Sep. 2000.
31. A.M. El-Serafi and A. S. Abdallah, "Saturated synchronous reactances of synchronous machines," IEEE Trans. Energy Convers., vol. 7, no. 3, pp. 570-579, Sep. 1992.
32. A. M. El-Serafi and J. Wu, "Determination of the parameters representing the cross-magnetizing effect in saturated synchronous machines," IEEE Trans. Energy Convers., vol. 8, no. 3, pp. 333-342, Sep. 1992.
33. E. Levi and V. A. Levi, "Impact of dynamic cross-saturation on accuracy of saturated synchronous machine models," IEEE Trans. Energy Convers., vol. 15, no. 2, pp. 224-230, Jun. 2000.
34. N. C. Kar, T. Murata, and J. Tamura, "A new method to evaluate the q-axis saturation characteristic of cylindrical-rotor synchronous genetator," IEEE Trans. Energy Convers., vol. 15, no. 3, pp. 269-276, Sep. 2000.
35. S. H. Minnich, "Small signals, large signals, and saturation in generator modeling," IEEE Trans. Energy Convers., vol. 1, no. 1, pp. 94-102, Mar. 1986.
36. D. Lindenmeyer, H. W. Dommel, A. Moshref, and P. Kundur, "An induction motor parameter estimation method," Elect. Power Energy Syst., vol. 23, pp. 251-262, 2001.
37. G. J. Rogers and D. Shirmohammadi, "Induction machine modeling for electromagnetic transient program," IEEE Trans. Energy Convers., vol. 2, no. 4, pp. 622-628, Dec. 1987.
38. B. K. Johnson and J. R. Willis, "Tailoring induction motor analytical models to fit known motor performance characteristics and satisfy particular study needs," IEEE Trans. Power Del., vol. 6, no. 3, pp. 959-965, Aug. 1991.
39. J. R. Willis, G. J. Brock, and J. S. Edmonds, "Derivation of induction motor models from standstill frequency response tests," IEEE Trans. Energy Convers., vol. 4, no. 4, pp. 608-615, Dec. 1989.
40. J. A. de Kock, F. S. van der Merwe, and H. J. Vermeulen, "Induction machine parameter estimation through an output error technique," IEEE Trans. Energy Convers., vol. 9, no. 1, pp. 69-76, Mar. 1994.
41. S. I. Moon and A. Keyhani, "Estimation of induction machine parameters from standstill time-domain data," IEEE Trans. Ind. Appl., vol. 30, no. 6, pp. 1609-1615, Nov./Dec. 1994.
42. P. Ju, E. Handschin, Z. N. Wei, and U. Schlücking, "Sequential parameter estimation of a simplified induction motor load model," IEEE Trans. Power Syst., vol. 11, no. 1, pp. 319-324, Mar. 1996.
43. J. Holtz and T. Thimm, "Identification of the machine parameters in a vector-controlled induction motor drive," IEEE Trans. Ind. Appl., vol. 27, no. 6, pp. 1111-1118, Nov./Dec. 1991.
44. J. Stephan, M. Bodson, and J. Chiasson, "Real-time estimation of the parameters and fluxes of induction motors," IEEE Trans. Ind. Appl., vol. 30, no. 3, pp. 746-759, May/Jun. 1994.