A review of analyses related to vibrations of rotating piezoelectric bodies and gyroscopes

IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

Volumn 52, Issue 5, 2005, Pages 698-706

  Yang, Jiashi ^a  

^a UNIVERSITY OF NEBRASKA LINCOLN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CORIOLIS FORCE; PIEZOELECTRIC GYROSCOPES; ROTATING PIEZOELECTRIC BODIES; VIBRATORY GYROSCOPES;

ACCELEROMETERS; DESIGN; OPTIMIZATION; PARTIAL DIFFERENTIAL EQUATIONS; PIEZOELECTRIC DEVICES; RESONATORS; ROTATING MACHINERY; SENSORS; VIBRATIONS (MECHANICAL); VIDEO CAMERAS;

GYROSCOPES;

EID: 23844536197     PISSN: 08853010     EISSN: None     Source Type: Journal    
DOI: 10.1109/TUFFC.2005.1503958     Document Type: Review

References (113)

1. J. S. Burdess, A. J. Harris, J. Cruickshank, D. Wood, and G. Cooper,"A review of vibratory gyroscopes," Eng. Sci. Educa. J.,pp. 249-254, 1994.
2. J. Soderkvist,"Micromachined gyroscopes," Sens. Actuators A,vol. 43,pp. 65-71, 1994.
3. P. W. Loveday,"Analysis and compensation of imperfection effects in piezoelectric vibratory gyroscopes," Ph.D. dissertation, Virginia Polytechnic Institute and State University, Blacksburg, VA, 1999.
4. H. Y. Fang,"Vibrations of a rotating piezoelectric body and applications in gyroscopes," Ph.D. dissertation, University of Nebraska, 2000.
5. J. C. Baumhauer and H. F. Tiersten,"Nonlinear electroelastic equations for small fields superposed on a bias," J. Acoust. Soc. Amer.,vol. 54,pp. 1017-1034, 1973.
6. H. F. Tiersten,"On the nonlinear equations of thermo- electroelasticity," Int. J. Eng. Sci.,vol. 9,pp. 587-604, 1971.
7. J. S. Yang and H. Y. Fang,"A piezoelectric gyroscope based on extensional vibrations of rods," Int. J. Appl. Electromagn. Mech.,vol. 17,pp. 289-300, 2003.
8. W. D. Gates,"Vibrating angular rate sensor may threaten the gyroscope," Electronics,vol. 41,pp. 130-134, 1968.
9. C. S. Chou, J. W. Yang, Y. C. Hwang, and H. J. Yang,"Analysis on vibrating piezoelectric beam gyroscope," Int. J. Appl. Electromagn. Mater.,vol. 2,pp. 227-241, 1991.
10. H. Y. Fang and J. S. Yang,"Analysis of a beam piezoelectric gyroscope," in Proc. 10th Int. Symp. Appl. Electromagn. Mechan., May 13-16, 2001,pp. 445-446.
11. H. Y. Fang and J. S. Yang,"Vibration analysis of a rotating elastic beam with piezoelectric films as an angular rate sensor," in Proc. IEEE Int. Freq. Contr. Symp., 2001,pp. 507-513.
12. S. Kudo, S. Sugawara, and N. Wakatuki,"Improvement of transitional response characteristics of a piezoelectric vibratory gyroscope," Jpn. J. Appl. Phys.,vol. 35,pp. 3055-3058, 1996.
13. S. Kudo, M. Konno, S. Sugawara, and T. Yoshida,"Consideration on equivalent mechanical circuits for vibratory gyroscope," in Proc. IEEE Ultrason. Symp., 1990,pp. 397-400.
14. M. Konno, S. Sugawara, and S. Kudo,"Piezoelectric vibratory gyroscope as an angular velocity sensor," Electron. Commun. Jpn., pt. 2,vol. 79,pp. 40-52, 1996.
15. J. Soderkvist,"Piezoelectric beams and angular rate sensors," in Proc. IEEE Forty-Fourth Annu. Symp. Freq. Contr., 1990,pp. 406-415.
16. J. Soderkvist,"Piezoelectric beams and vibrating angular rate sensors," IEEE Trans. Ultrason., Ferroelect., Freq. Contr.,vol. 38,pp. 271-280, 1991.
17. J. S. Yang,"Some analytical results on piezoelectric gyroscopes," in Proc. IEEE Int. Freq. Symp., 1998,pp. 733-741.
18. J. S. Yang and H. Y. Fang,"Analysis of a rotating elastic beam with piezoelectric films as an angular rate sensor," IEEE Trans. Ultrason., Ferroelect., Freq. Contr.,vol. 49,pp. 798-804, 2002.
19. J. S. Yang,"Vibrations of rotating piezoelectric structures and angular rate sensors," in Proc. 4th Int. Conf. Nonlinear Mech., 2002,pp. 378-382.
20. J. S. Yang,"Piezoelectric vibratory gyroscopes," in Mechanics of Electromagnetic Solids. J. S. Yang and G. A. Maugin, Eds. Norwell, MA: Kluwer,pp. 1-16, 2003.
21. J. S. Yang, H. Y. Fang, and Q. Jiang,"Analysis of a ceramic bimorph piezoelectric gyroscope," Int. J. Appl. Electromagn. Mech.,vol. 10,pp. 459-473, 1999.
22. J. S. Yang,"High voltage sensitivity Coriolis force driven piezoelectric transformer-gyroscope system, and method of use," U.S. Patent 6,140,748, 2000.
23. J. S. Yang, H. Y. Fang, and Q. Jiang,"Analysis of a few piezoelectric gyroscopes," in Proc. IEEE/EIA Int. Freq. Contr. Symp. Exhib., 2000,pp. 79-86.
24. H. Abe, T. Yoshida, and K. Turuga,"Piezoelectric-ceramic cylinder vibratory gyroscope," Jpn. J. Appl. Phys.,vol. 31,pp. 3061-3063, 1992.
25. H. Abe, T. Yoshida, H. Kobayashi, and K. Nakamura,"Temperature dependence of zero offset of piezoelectric-ceramic cylinder vibratory gyroscope," Jpn. J. Appl. Phys.,vol. 35,pp. 5031-5033, 1996.
26. K. Shuta and H. Abe,"Compact vibratory gyroscope," Jpn. J. Appl. Phys.,vol. 34,pp. 2601-2603, 1995.
27. H. Shimizu, T. Yoshida, and C. Mashiko,"Gyroscope using circular rod type piezoelectric vibrator," U.S. Patent 5,336,960, 1994.
28. S. Fujishima, T. Nakamura, and K. Fujimoto,"Piezoelectric vibratory gyroscope using flexural vibration of a triangular bar," in Proc. IEEE 45th Annu. Symp. Freq. Contr., 1991,pp. 261-265.
29. J. S. Yang and H. Y. Fang,"A new ceramic tube piezoelectric gyroscope," Sens. Actuators A,vol. 107,pp. 42-49, 2003.
30. J. S. Yang,"Tubular Coriolis force driven piezoelectric gyroscope system, and method of use," U.S. Patent 6,457,358 B1, 2002.
31. O. Bel and R. Bourquin,"Effect of geometrical electrodes defects on the bias and sensitivity of tuning fork angular rate sensor," in Proc. IEEE Int. Freq. Contr. Symp., 2001,pp. 502-506.
32. S. Kudo,"Consideration on temperature characteristics of sensitivity in quartz tuning fork gyroscope," Jpn. J. Appl. Phys.,vol. 37,pp. 2872-2873, 1998.
33. S. Kudo,"Consideration of figure of merit of piezoelectric vibratory gyroscope using charge sensitivity," Jpn. J. Appl. Phys.,vol. 40,pp. 3688-3692, 2001.
34. S. Kudo, S. Sugawara, and N. Wakatuki,"Finite element analysis of single crystal tuning forks for gyroscopes," in Proc. IEEE Freq. Contr. Symp., 1996,pp. 640-647.
35. S. Kudo, M. Konno, S. Sugawara, and T. Yoshida,"Vibrational analysis of tuning fork gyroscope with orthogonal arms," Jpn. J. Appl. Phys.,vol. 32,pp. 2310-2313, 1993.
36. S. Kudo,"Finite element analysis of mechanical couplings in a tuning fork gyroscope," Jpn. J. Appl. Phys.,vol. 36,pp. 3028-3029, 1997.
37. 3 single-crystal tuning fork vibratory gyroscope," Electron. Commun. Jpn., pt. 2,vol. 82,pp. 82-90, 1999.
38. H. Matsudo, M. Ishihara, S. Kawasaki, J. Yukawa, and M. Hatanaka,"Quartz crystal element for angular rate sensor," in Proc. IEEE/EIA Int. Freq. Contr. Symp. Exhib., 2000,pp. 91-95.
39. I. A. Ulitko,"Mathematical theory of the fork-type wave gyroscope," in Proc. IEEE Freq. Contr. Symp., 1995,pp. 786-793.
40. 3 crystal fork vibratory gyroscope," in Proc. IEEE Ultrason. Symp., 1994,pp. 581-584.
41. 3 crystal fork vibratory gyroscope," in Proc. IEEE Ultrason. Symp., 1995,pp. 423-427.
42. N. Wakatsuki and H. Tanaka,"Finite element method analysis of single crystal tuning fork gyroscope for suppression of its inner leakage coupling," Jpn. J. Appl. Phys.,vol. 36,pp. 3037-3040, 1997.
43. M. Yachi, H. Ishikawa, and Y. Satoh,"Design methodology of single crystal tuning fork gyroscope for automotive applications," in Proc. IEEE Ultrason. Symp., 1998,pp. 463-466.
44. T. Ichimura, Y. Tomikawa, and H. Tamura,"FEM studies of gyrosensor using quartz crystal trident-type tuning fork resonator for detection of three-axes angular velocities," Jpn. J. Appl. Phys.,vol. 41,pp. 3399-3402, 2002.
45. N. Ishida and Y. Tomikawa,"Basic considerations of trident type tuning fork accelerometers using Coriolis force phenomenon," Jpn. J. Appl. Phys.,vol. 38,pp. 3228-3232, 1999.
46. T. Koitabashi, S. Kudo, S. Okada, and Y. Tomikawa,"Improvement of a one-chip-style quartz crystal motion sensor for detection of angular velocity and acceleration," Jpn. J. Appl. Phys.,vol. 41,pp. 3403-3408, 2002.
47. A. Satoh, K. Ohnishi, and Y. Tomikawa,"Characteristics of the piezoelectric vibratory gyrosensor constructed using a trident tuning-fork resonator," in Proc. IEEE Ultrason. Symp., 1998,pp. 555-558.
48. A. Satoh, K. Ohnishi, K. Sakurai, and Y. Tomikawa,"Finite-element analysis of trident-type tuning fork resonator for vibratory gyroscope," Jpn. J. Appl. Phys.,vol. 34,pp. 2604-2609, 1995.
49. N. Shiratori, Y. Tomikawa, and K. Ohnishi,"Vibratory gyrosensor using vertically set quartz crystal trident-type tuning fork resonator," Jpn. J. Appl. Phys.,vol. 38,pp. 3217-3219, 1999.
50. M. Chiba and N. Wakatsuki,"Temperature self-compensated lithium tantalate piezoelectric gyroscope for higher stability," Jpn. J. Appl. Phys.,vol. 39,pp. 3069-3072, 2000.
51. 3 plate," Jpn. J. Appl. Phys.,vol. 40,pp. 3699-3703, 2001.
52. M. Rodamaker and C. R. Newell,"Finite element analysis of a quartz angular rate sensor," in ANSYS Conf. Proc., 1989,pp. 3.35-48.
53. 3 piezoelectric gyroscope," Jpn. J. Appl. Phys.,vol. 37,pp. 2868-2871, 1998.
54. N. Wakatsuki, S. Kudo, and M. Chiba,"Temperature self-compensated lithium tantalate piezoelectric gyroscope for higher sensitivity and stability," Ultrasonics,vol. 38,pp. 46-50, 2000.
55. N. Wakatsuki, S. Kudo, Y. Satoh, and H. Tanaka,"A new approach to piezoelectric crystal gyroscopes for higher sensitivity," in Proc. IEEE Ultrason. Symp., 1998,pp. 477-480.
56. Y. Kagawa, T. Tsuchiya, and T. Kawashima,"Finite element simulation of piezoelectric vibrator gyroscopes," IEEE Trans. Ultrason., Ferroelect., Freq. Contr.,vol. 43,pp. 509-518, 1996.
57. J. S. Yang, H. Y. Fang, and Q. Jiang,"One-dimensional equations for a piezoelectric ring and applications in a gyroscope," IEEE Trans. Ultrason., Ferroelect., Freq. Contr.,vol. 48,pp. 1275-1282, 2001.
58. J. S. Burdess and T. Wren,"The theory of a piezoelectric disk gyroscope," IEEE Trans. Aeros. Electron. Syst.,vol. 22,pp. 410-418, 1986.
59. G. M. Reese, E. L. Marek, and D. W. Lobitz,"Three-dimensional finite element calculations of an experimental quartz resonator sensor," in Proc. IEEE Ultrason. Symp., 1989,pp. 419-422.
60. H. Abe, T. Yoshida, and H. Watanabe,"Piezoelectric vibratory gyroscopes using energy trapping of thickness-shear vibrations excited by parallel electric field," in Proc. World Congr. Ultrason., 1997,pp. 264-265.
61. H. Abe, T. Yoshida, and H. Watanabe,"Energy trapping of thickness-shear vibrations excited by parallel electric field and its applications to piezoelectric vibratory gyroscopes," in Proc. IEEE Ultrason. Symp., 1998,pp. 467-471.
62. H. Abe, T. Yoshida, T. Ishikawa, N. Miyazaki, and H. Watanabe, "Trapped energy gyroscopes using thickness shear vibrations in partially polarized piezoelectric ceramic plate," Jpn. J. Appl. Phys.,vol. 37,pp. 5345-5348, 1998.
63. H. Abe, T. Yoshida, T. Ishikawa, N. Miyazaki, and H. Watanabe, "Trapped-energy vibratory gyroscopes using a partially-polarized piezoelectric ceramic plate," Trans. Institute Electron. Inform. Commun. Eng. C-I,vol. J82,pp. 798-805, 1999. (in Japanese)
64. 3," Jpn. J. Appl. Phys.,vol. 37,pp. 2864-2867, 1998.
65. 3," in Proc. Joint Meeting EFTF-IEEE IFCS, 1999,pp. 796-799.
66. 3," in Proc. IEEE Ultrason. Symp., 2001,pp. 611-614.
67. H. Watanabe, H. Abe, M. Takahashi, and T. Ishikawa,"Trapped-energy vibratory gyroscopes using piezoelectric ceramic plate with plano-mesa structure," Jpn. J. Appl Phys.,vol. 42,pp. 3396-3398, 2002.
68. J. S. Yang,"Analysis of ceramic thickness shear piezoelectric gyroscopes," in Proc. IEEE Ultrason. Symp., 1996,pp. 909-912.
69. J. S. Yang,"Analysis of ceramic thickness shear piezoelectric gyroscopes," J. Acoust. Soc. Amer.,vol. 102,pp. 3542-3548, 1997.
70. J. S. Yang, H. Y. Fang, and Q. Jiang,"Equations for a piezoelectric parallelepiped and applications in a gyroscope," Int. J. Appl. Electromagn. Mech.,vol. 10,pp. 337-350, 1999.
71. J. S. Yang, H. Y. Fang, and Q. Jiang,"Analysis of a plate piezoelectric gyroscope by equations for a piezoelectric parallelepiped," in Proc. Joint Meeting EFTF - IEEE IFCS, 1999,pp. 433-437.
72. H. Y. Fang, J. S. Yang, and Q. Jiang,"Analysis of a quartz plate thickness-shear piezoelectric gyroscope," in Proc. Symp. Mechan. Electromagn. Mater. Struct., 2000,pp. 159-172.
73. H. Ryoo, Y. Lee, and Y. Roh,"Design and fabrication of a dual axial gyroscope with piezoelectric ceramics," in Proc. IEEE Freq. Contr. Symp., 1997,pp. 189-195.
74. J. S. Burdess,"The dynamics of a thin piezoelectric cylinder gyroscope," in Proc. Inst. Mech. Eng., 1986,pp. 271-280.
75. R. M. Langdon,"The vibrating cylinder gyro," Maconi Rev.,pp. 231-249, 1982.
76. C. H. J. Fox,"Vibrating cylinder rate gyro: Theory of operation and error analysis," in Proc. Symp. Gyro Technol., 1988,pp. 5.0-5.23.
77. P. W. Loveday,"A coupled electromechanical model of an imperfect piezoelectric vibrating cylinder gyroscope," J. Intelligent Mater. Syst. Struct.,vol. 7,pp. 44-53, 1996.
78. P. W. Loveday and C. A. Rogers,"Modification of piezoelectric vibratory gyroscope resonator parameters by feedback control," IEEE Trans. Ultrason., Ferroelect., Freq. Contr.,vol. 45,pp. 1211-1215, 1998.
79. J. S. Yang,"A circular cylindrical shell piezoelectric gyroscope," Int. J. Appl. Electromagn. Mech.,vol. 8,pp. 259-271, 1997.
80. J. S. Yang, H. Y. Fang, and Q. Jiang,"A vibrating piezoelectric ceramic shell as a rotation sensor," Smart Mater. Struct.,vol. 9,pp. 445-451, 2000.
81. H. Cohen and R. G. Muncaster, The Theory of Pseudo-Rigid Bodies. New York: Springer, 1988.
82. H. F. Tiersten, D. S. Stevens, and P. K. Das,"Acoustic surface wave accelerometer and rotation rate sensor," in Proc. IEEE Ultrason. Symp., 1980,pp. 692-695.
83. B. Y. Lao,"Gyroscopic effect in surface acoustic waves," in Proc. IEEE Ultrason. Symp., 1980,pp. 687-691.
84. T. Wren and J. S. Burdess,"Surface waves perturbed by rotation," J. Appl. Mech.,vol. 54,pp. 464-466, 1987.
85. N. S. Clarke and J. S. Burdess,"A rotation rate sensor based upon a Rayleigh resonator," J. Appl. Mech.,vol. 61,pp. 139-143, 1994.
86. N. S. Clarke and J. S. Burdess,"Rayleigh waves on a rotating surface," J. Appl. Mech.,vol. 61,pp. 724-726, 1994.
87. M. Destrade,"Rayleigh waves in anisotropic crystals rotating about the normal to a symmetry plane," J. Appl. Mech.,vol. 77,pp. 516-520, 2004.
88. M. Destrade,"Surface acoustic waves in rotating orthorhombic crystals," Proc. R. Soc. London,vol. 460,pp. 653-665, 2004.
89. T. C. T. Ting,"Surface waves in a rotating anisotropic elastic half-space," Wave Motion,vol. 40,pp. 329-346, 2004.
90. H. Y. Fang, J. S. Yang, and Q. Jiang,"Gyroscopic effect in surface piezoelectric waves," in Proc. IEEE Ultrason. Symp., 1999,pp. 497-500.
91. H. Y. Fang, J. S. Yang, and Q. Jiang,"Rotation perturbed surface acoustic waves propagating in piezoelectric crystals," Int. J. Solids Struct.,vol. 37,pp. 4933-4947, 2000.
92. H. Y. Fang, J. S. Yang, and Q. Jiang,"Surface waves propagating over a rotating piezoelectric half-space," IEEE Trans. Ultrason., Ferroelect., Freq. Contr.,vol. 48,pp. 998-1004, 2001.
93. M. Kurosawa, Y. Fukuda, M. Takasaki, and T. Higuchi,"A surface-acoustic-wave gyro sensor," Sens. Actuators A,vol. 66,pp. 33-39, 1998.
94. Y.-H. Zhou and Q. Jiang,"Effects of Coriolis force and centrifugal force on acoustic waves propagating along the surface of a piezoelectric half-space," J. Appl. Math. Phys.,vol. 52,pp. 950-965, 2001.
95. H. F. Tiersten, D. S. Stevens, and P. K. Das,"Circulating flexural wave rotation rate sensor," in Proc. IEEE Ultrason. Symp., 1981,pp. 163-166.
96. J. S. Yang, H. Fang, and Q. Jiang,"Thickness vibrations of rotating piezoelectric plates," J. Acoust. Soc. Amer.,vol. 104,pp. 1427-1435, 1998.
97. J. A. Kosinski, R. A. Pastore, Jr., H. Y. Fang, and J. S. Yang,"Thickness vibrations of a rotating AT-cut quartz plate," in Proc. IEEE Ultrason. Symp., 2001,pp. 795-798.
98. H. Y. Fang, J. S. Yang, and Q. Jiang,"Rotation sensitivity of waves propagating in a rotating piezoelectric plate," Int. J. Solids Struct.,vol. 39,pp. 5241-5251, 2002.
99. J. Wauer,"Waves in rotating conducting piezoelectric media," J. Acoust. Soc. Amer.,vol. 106,pp. 626-636, 1999.
100. J. Wauer,"Wave propagation in rotating thermo-piezoelectric solids," in Modern Practice in Stress and Vibration Analysis. Gilchrist, Ed. Rotterdam, The Netherlands: Balkema, 1997,pp. 127-134.
101. W. H. Quick,"Theory of the vibrating string as an angular motion sensor," J. Appl. Mech.,pp. 523-534, 1964.
102. D. Boocock and L. Maunder,"Vibration of a symmetric tuning-fork," J. Mech. Eng. Sci.,vol. 11,pp. 364-375, 1969.
103. A. L. Simmons, D. W. Rosse, and J. W. Dzimianski,"Angular velocity measuring device," U.S. Patent 3143889, Aug. 1964.
104. T. G. Hart,"Piezoelectric resonance device," U.S. Patent 3141100, Jul. 14, 1964.
105. T. Nakamura, K. Fujimoto, and J. Inoue,"Vibrator," U.S. Patent 5117148, May 1992.
106. H. Shimizu, T. Yoshida, and C. Mashiko,"Gyroscope using circular rod type piezoelectric vibrator," U.S. Patent 5336960, Aug. 1994.
107. W. S. Watson,"Single bar type vibrating element angular rate sensor system," U.S. Patent 5430342, Jul. 1995.
108. S. Abe and K. Ogawa,"Vibrator and detector circuit for vibrating gyro," U.S. Patent 5434467, Jul. 1995.
109. M. Sato, T. Kobayashi, T. Watanabe, K. Mizumoto, H. Kajino, and H. Kurachi,"Sensor for detecting rotational movement," U.S. Patent 5471875, Dec. 1995.
110. T. G. Hart,"Piezoelectric device," U.S. Patent 3258617, Jun. 28, 1996.
111. T. Nakamura,"Vibrating gyroscope," U.S. Patent 5751093, May 12, 1998.
112. T. Kobayashi, K. Okumura, K. Mizumoto, and I. Hagiwara,"Angular rate detector," U.S. Patent 5817940, Oct. 1998.
113. K. Ebara, K. Fujimoto, and H. Nishiyama,"Vibration gyroscope," U.S. Patent 5850119, Dec. 1998.