Developing damage tolerance and creep resistance in a high strength nickel alloy for disc applications

Proceedings of the International Symposium on Superalloys

Volumn , Issue , 2004, Pages 83-90

  Hardy, M C ^a   Zirbel, B ^b   Shen, G ^b   Shankar, R ^b  

^a ROLLS ROYCE PLC   (United Kingdom)

^b Ladish Co Inc   (United States)

Author keywords

Disc forgings; Powder metallurgy; RR1000

Indexed keywords

CRACK PROPAGATION; CREEP; GRAIN BOUNDARIES; MICROSTRUCTURE; PHASE DIAGRAMS; POWDER METALLURGY; STRENGTH OF MATERIALS;

ANTI-PHASE BOUNDARY ENERGY; DISC FORGING; GRAIN MICROSTRUCTURE; RR 1000;

NICKEL ALLOYS;

EID: 23744437796     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.7449/2004/superalloys_2004_83_90     Document Type: Conference Paper

References (27)

1. N. Saunders and A.P. Midownik, CALPHAD Calculation of Phase Diagrams - A Comprehensive Guide (Pergammon, Oxford, UK, 1998).
2. N. Saunders, "Phase Diagram Calculations for Ni-Based Superalloys", Superalloys 1996, ed. R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford (Warrendale, PA, USA: The Minerals, Metals and Materials Society, 1996), 101-110.
3. D.W. Hunt, "The Stability and Mechanical Properties of a Nickel-Base Turbine Disc Alloy" (PhD Thesis, Emmanuel College, University of Cambridge, UK, 2001).
4. N. Saunders, M. Fahrman, and C.J. Small, "The Application of CALPHAD Calculations to Ni-Based Superalloys", Superalloys 2000, ed. T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S.L. Olson and J.J. Schirra, (Warrendale, PA, USA: The Mineral, Metals and Materials Society, 2000), 803 - 811.
5. W.J. Boesch and J.S. Slaney, "Preventing Sigma Phase Embrittlement in Nickel Base Superalloys", Metal Progress, 86, (1964), 109-111.
6. D.W. Hunt et al., "Microstructural Stability and Crack Growth Behaviour of a Polycrystalline Nickel-Base Superalloy", Superalloys 2000, ed. T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson and J.J. Schirra, (Warrendale, PA, USA: The Minerals, Metals and Materials Society, 2000), 795-802.
7. S.J. Hessell, W. Voice, A.W. James, S.A. Blackham, C.J. Small, and M.R. Winstone, "Nickel Alloy for Turbine Engine Components", (US Patent 6,132,527, 2000).
8. N.S. Stoloff, "Fundamental of Strengthening", Superalloys II, ed. C.T. Sims, N.S. Stoloff and W.C. Hagel (John Wiley & Sons, New York, USA, 1987), 61-96.
9. A.K. Jena and M.C. Chaturvedi, "The Role of Alloying Elements in the Design of Nickel-Base Superalloys", J.Mat. Sci., 19, (1984), 3121-3139.
10. F.A.S. Reed and J.E. King, "Comparison of Long and Short Crack Growth in Polycrystalline and Single Crystal Forms of Udimet 720", Short Fatigue Cracks, ed. K.J. Miller and E.R. de los Rios (Mechanical Engineering Publications, London, UK, 1992), 153-168.
11. P.W. Keefe, S.O. Mancuso, and G.E. Maurer, "Effects of Heat Treatment and Chemistry on the Long-Term Phase Stability of a High Strength Nickel-Based Superalloy, Superalloys 1992, ed. S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom (Warrendale, PA, USA: The Mineral, Metals and Materials Society, 1992), 487 - 496.
12. S. Floreen, Mechanical Behavior, "Mechanical Behavior", Superalloys II, ed. C.T. Sims, N.S. Stoloff and W.C. Hagel (John Wiley & Sons, New York, USA, 1987), 241-262.
13. C.T. Sims, "Prediction of Phase Composition", Superalloys II, ed. C.T. Sims, N.S. Stoloff and W.C. Hagel (John Wiley & Sons, New York, USA, 1987), 217-240.
14. H.Y.Li and P. Bowen, "Effect of Hafnium on the Creep-Fatigue Crack Growth resistance of Nickel Based Superalloy RR1000 at 725°C" (Technical Report from the University of Birmingham, UK, 2000).
15. D.J. Bryant and G. McIntosh, "The Manufacture and Evaluation of a Large Turbine Disc in Cast and Wrought Alloy 720Li", Superalloys 1996, ed. R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford (Warrendale, Pennsylvania, USA: The Minerals, Metals and Materials Society, 1996), 713-722.
16. J.C. Lautridou, J.Y. Guedou and Y. Honnorat, "Effect of Inclusions on LCF life of PM Superalloys for Turboengine Discs", High Temperature Materials for Power Engineering, ed. E. Bachelet et al, (London, UK: Kluwer Academic Publishers, 1990), 1163-1172.
17. E.S. Huron and P.O. Roth, "The Influence of Inclusions on Low Cycle Fatigue Life in a P/M Nickel-Base Disk Superalloy", Superalloys 1996, ed. R.D Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford (Warrendale, Pennsylvania, USA: The Minerals, Metals and Materials Society, 1996), 359-368.
18. G.A. Miller, K.A. Green, A. Banik, J. Lemsky and G.Y. Richardson, "Enhanced Powder Metallurgy (P/M) Processing of Udimet 720 AE1107C (T406) Turbine Disks", Advanced Technologies for Superalloy Affordability, ed. K.-M. Chang, S.K. Srivastava, D.U. Furrer, and K.R. Bain (Warrendale, Pennsylvania, USA: The Minerals, Metals and Materials Society, 2000), 37-48.
19. X. Pierron, A. Banik, G.E. Maurer, J. Lemsky, D.U. Furrer and S. Jain, "Sub-Solidus HIP Process for P/M Superalloy Conventional Billet Conversion" Superalloys 2000, ed. T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson and J.J. Schirra, (Warrendale, Pennsylvania, USA: The Minerals, Metals and Materials Society, 2000), 425-433.
20. th International Symposium on Superalloys, Seven Springs Mountain Resort, Champion, PA, 19-23 September 2004).
21. G.Shen and D. Furrer, "Manufacturing of Aerospace Forgings", Journal of Materials Processing Technology, 98, 2000, 189-195.
22. Pineau, "High Temperature Fatigue of Ni-Base Superalloys: Microstructural and Environmental Effects", Engineering Against Fatigue, ed. J.H. Beynon, M.W. Brown, R.A. Smith, T.C. Lindley and B. Tomkins (A.A. Balkema, Rotterdam, Netherlands, 1999), 557-565.
23. Unpublished R-R work.
24. I.M. Wilcock, D.G Cole, J.W. Brooks, and M.C. Hardy, "Creep/fatigue behaviour of P/M nickel disc alloys", Parsons 2003 - Engineering Issues in Turbine Machinery, Power Plant and Renewables, ed. A. Strang, R.D. Conroy, W.M. Banks, M. Blackler, J. Leggett, G.M. McColvin, S. Simpson, M. Smith, F. Starr and R.W. Vanstone (Institute of Materials, Minerals and Mining, London, UK, 2003), 749-764.
25. M. Preuss, J.W.L. Pang, P.J. Withers, and G.J. Baxter, "Inertia Welding Nickel-Based Superalloy: Part I. Metallurgical Characterization", Met. Trans., 33A, October 2002, 3215-3225.
26. G. Bunge, D. Furrer, R. Shanker and C. White, "Super Cool Technology for Improved Heat Treatment", Materials World, May 2003, 10-12.
27. J. Gayda and D. Furrer, "Dual-Microstructure Heat Treatment", Advanced Materials and Processes, July 2003, 36-39.