Recovery and recrystallization after critical strain in the nickel-based superalloy René 88DT

Proceedings of the International Symposium on Superalloys

Volumn , Issue , 2004, Pages 391-400

  Whitis, D D ^a  

^a GE AVIATION   (United States)

Author keywords

Abnormal Grain Growth; AGG; CGG; Critical Grain Growth; Grain growth; Ren ssDT; Superalloys

Indexed keywords

GRAIN GROWTH; NICKEL ALLOYS; NUCLEATION; RECOVERY; RECRYSTALLIZATION (METALLURGY); STRAIN; TRANSMISSION ELECTRON MICROSCOPY;

ABNORMAL GRAIN GROWTH (AGG); CRITICAL GRAIN GROWTH (CGG); DISLOCATION STRUCTURE; RENÉ 88DT;

SUPERALLOYS;

EID: 23644448585     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.7449/2004/superalloys_2004_391_400     Document Type: Conference Paper

References (50)

1. D.D. Krueger, R.D. Kissinger, and R.G. Menzies. Development and introduction of a damage tolerant high temperature nickel-base disk alloy, ReneSSDT, in Superalloys 1992, TMS (1992) 277.
2. Huron, E.S., S. Srivatsa, and E. Raymond. Control of grain size limits via forging strain rate limits in R88DT. in Superalloys 2000. TMS (2000).
3. Blankenship, C.P., et al., Recrystallization and grain growth in strain gradient samples. Scripta Metallurgica et Materialia, 1994. 31(6): p. 647.
4. Blankenship, C.P., et al., Hot-Die Forging of P/M Ni-Base Superalloys, in Superalloys 1996, R.D. Kissinger, et al., Editor. 1996, The Minerals, Metals & Materials Society, p. 653.
5. Decker, R.F., et al., Abnormal Grain Growth in Nickel-base Heat-resistant alloys, in Technical Note 4082. 1957, National Advisory Committee for Aeronautics: Washington DC. p. 1.
6. Soucail, M., M. Marty, and H. Octor, The effect of high temperature deformation on grain growth in a P/M nickel base superalloy, in Superalloys 1996, R.D. Kissinger, et al., Editor. 1996, The Minerals, Metals & Materials Society, p. 663.
7. Menon, M.N. and F.J. Gurney, Microstructural Investigation of the Growth of Large Grains in Prealloyed Powder Extrustions of a Nickel Base Superalloy. Metallurgical Transactions, 1976. 7A: p. 731.
8. Dahlén, M. and L. Winberg, Grain coarsening of PM nickel-base superalloy by critical strain annealing. Metal Science, 1979. april: p. 163.
9. Humphreys, F.J., Nucleation of Recrystallization in metals and alloys with large particles, in Proceedings of the 1st Riso International Symposium on Metallurgy and Material Science, N. Hansen, et al., Editor. 1980, Risø National Laboratory: Roskilde, Denmark, p. 35.
10. Nes, E., Recrystallization in alloys with bimodal particle size distributions, in Proceedings of the 1st Riso International Symposium on Metallurgy and Material Science, N. Hansen, et al., Editor. 1980, Risø National Laboratory: Roskilde, Denmark, p. 85.
11. Beck, P.A. and P.R. Sperry, Strain Induced Grain Boundary Migration in High Purity Aluminum. Journal of Applied Physics, 1950. 21(2): p. 150.
12. Benson, W.E., A Model to Describe the Effect of Initial Grain Size Distribution on Abnormal Grain Growth with Application to Rene 88DT, (Ph.D. thesis, University of Virginia, 1998).
13. Wert, J.A. and L.K. Austin, Modeling of Thermomechanical Processing of Heat-Treatable Aluminum alloys. Metallurgical Transactions A, 1988. 19: p. 617.
14. Burke, I.E. and D. Turnbull, Recrystallization and Grain Growth. Progress in Metal Physics, 1952.3: p. 220.
15. Smith, C.S., Grains, Phases, and Interfaces: An Interpretation of Microstructure. Transactions of the AIME, 1948.175: p. 15.
16. Read, W.T. and W. Schockley, Dislocation models of crystal grain boundaries. Physical Review, 1950. 78(3): p. 275.
17. Humphreys, F.J. and M. Hatherly, Recrystallization and Related Annealing Phenomena. 1996, Oxford: Elsevier Science Ltd.
18. Hazzledine, P.M. and C.H. Worner, An analytical model for secondary recrystallization, in Modeling of Coarsening and Grain Growth, P.C.S.a.M. S.P., Editor. 1993, The Minerals, Metals & Materials Society.
19. Atkinson, H.V., Theories of normal grain growth in pure single phase systems. Acta Metallurgica, 1988. 36(3): p. 469.
20. Anderson, M.P., et al., Computer Simulation of Grain Growth - I. Kinetics. Acta Metallurgica, 1984. 32(5): p. 783.
21. Humphreys, F.J., A network model for recovery and recrystallization. Scripta metallurgica et materialia, 1992. 27: p. 1557.
22. Humphreys, F.J., A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures- II. The effect of second-phase particles. Acta Materialia, 1997. 45(12): p. 5031.
23. Benson, W.E. and J.A. Wert, The effect of initial grain size distribution on AGG in single-phase materials. Acta Materialia, 1998. 46(15): p. 5323.
24. Benson, W.E. and J.A. Wert, The effect of initial grain size distribution on abnormal grain growth: a model based on Hillert's formulations, in Grain Growth in Poly crystalline Materials III, H. Weiland, Adams, B.L. and Rollett, A.D., Editor. 1998, The Minerals, Metals & Materials Society, p. 125.
25. Srolovitz, D.J., G.S. Grest, and M.P, Anderson, Computer Simulation of Grain Growth - V. Abnormal Grain growth. Acta Metallurgica, 1985.33(12): p. 2233.
26. Doherty, R.D., et al., Effect of secondary phase particles on grain growth in three dimensions, in Simulation and Theory of Evolving Microstructures, M.P.a.R. Anderson, A.D., Editor. 1990, The Minerals, Metals & Materials Society, p. 3.
27. Hazzledine, P.M. and R.D.J. Oldershaw, Computer simultation of Zener pinning. Philosophical Magazine A, 1990. 61(4): p. 579.
28. Rollett, A.D., D.J. Srolovitz, and M.P. Anderson, Simulation and theory of abnormal grain growth-anisotropic grain boundary energies and mobilities. Acta Metallurgies 1989. 37(4): p. 1227.
29. Bowles, J.S. and W. Boas, The effect of crystal arrangement on secondary recrystallization in metals. Journal of the Institute of Metals, 1948. 74: p. 501.
30. Kronberg, M.L. and F.H. Wilson, Secondary Recrystallization in Copper. Metals Transactions, 1949. 185: p. 501.
31. Humphreys, F.J., A unified theory of recovery, recrystallization and grain growth, based on the stability and growth of cellular microstructures- I. The basic model. Acta Materialia, 1997. 45(10): p. 4231.
32. May, J.E. and D. Turnbull, Secondary Recrystallization in Silicon Iron. Transactions of the Metallurgical Society of AIME, 1958. 212: p. 769.
33. Hayakawa, Y., et al., A mechanism of Goss texture development during secondary recrystallization in electrical steel, in Grain Growth in Poly crystalline Materials III: Proceedings of the third international conference on grain growth (ICGG-3), H. Weiland, Adams, B.L. and Rollett, A.D., Editor. 1998, The Minerals, Metals & Materials Society: Warrendale, PA, USA. p. 615.
34. Harase, J., et al., Effect of primary recrystallization texture, orientation distribution and grain boundary characteristics on the secondary recrystallization behavior of grain-oriented silicon steel haing AlN and MnS as inhibitors, in Proceeding from the 4th International Symposium on Grain Boundary Structure and Related Phenomena. 1986, Japan Institute of Metals, p. 563.
35. Gangli, P. and J.A. Szpunar, The use of sigma operators in the investigating secondary recrystallizationof 3% silicon steel. Materials Science Forum, 1994. 157-162: p. 953.
36. Kurosawa, M., Y. Hayakawa, and M. Komatsubara, Effect of cold reduction on secondary recrystallization stability in grain oriented electrical steel, in Grain Growth in Polycrystalline Materials III, H. Weiland, Adams, B.L. and Rollett, A.D., Editor. 1998, The Minerals, Metals & Materials Society, p. 627.
37. Ushigami, Y., K. Murakami, and T. Kubota, Analysis of secondary recrystallization in grain oriented silicon steel by synchrotron x-ray topography, in Grain Growth in Polycrystalline Materials III, H. Weiland, Adams, B.L. and Rollett, A.D., Editor. 1998, The Minerals, Metals & Materials Society, p. 491.
38. Rajmohan, N., J.A. Szpunar, and Y. Hayakawa, A role of fractions of mobile grain boundaries in secondary recrystallization of Fe-Si steels. Acta materialia, 1999. 47(10): p. 2999.
39. Yoon, D.Y., et al.,. 1994: U.S. Patent No. 5,529,643.
40. Cho, Y.K., Effect of Low Deformation on Grain Growth in Nickel-Base Superalloy Rene 88. 1999, Korea Advanced Institute of Science and Technology.
41. DeMania, D.A., "Recovery and Recrystallization in R88" (Ph.D. thesis, University of Virginia, 2002).
42. Zhao, J.-C., V. Ravikumar, and A.M. Beltran, Phase precipitation and phase stability in Nimonic 263. Metallurgical and materials transactions A, 2001. 32(6): p. 1271.
43. Gudmundsson, H., D. Brooks, and J.A. Wert, Acta metallurgica et materialia, 1991. 39: p. 19.
44. Okamoto, P.R., E. Levine, and G.J. Thomas, Journal of Applied Physics, 1967. 38: p. 289.
45. Mattheis, S. and G.W. Vinel, On the reproduction of the orientation distribution function of textured samples from reduced pole figures using the concept of conditional ghost correction. Physica Status Solidi B, 1982.112: p. Kill.
46. Kotval, P.S., The microstructure of superalloys. Metallography, 1969.1: p. 251.
47. Ray, R.K. and B. Bhattacharya. Recrystallization behavior of a Ni3Al (B,Zr) alloy, in Recrystallization and Grain Growth. 2001. Aachen, Germany: Springer-Verlag.
48. Kocks, U.F., C.N. Tome, and H.-R. Wenk, Texture and Anistropy; Preferred Orientations in Polycrystals and their Effect on Materials Properties. 1998, Cambridge: University Press. 676.
49. Prof. Scan Agnew, private communication with author, University of Virginia, March 2002.
50. Lee, S.B., et al., Grain boundary faceting and abnormal grain growth in nickel. Metallurgical and materials transactions A, 2000. 31(march): p. 985.