Disposable smart lab on a chip for point-of-care clinical diagnostics

Proceedings of the IEEE

Volumn 92, Issue 1, 2004, Pages 154-173

  Ahn, Chong H ^a   Choi, Jim Woo ^b   Beaucage, Gregory ^a   Nevin, Joseph H ^a   Lee, Jeong Bong ^c   Puntambekar, Aniruddha ^a   Lee, Jae Y ^d  

^a UNIVERSITY OF CINCINNATI   (United States)

^b LOUISIANA STATE UNIVERSITY   (United States)

^c UNIVERSITY OF TEXAS AT DALLAS   (United States)

^d OHIO STATE UNIVERSITY   (United States)

Author keywords

Biosensor array; Clinical diagnostics; Lab on a chip; On chip power source; Smart passive microfluidics

Indexed keywords

CONCENTRATION (PROCESS); DISEASES; ELECTRIC POTENTIAL; FLUIDICS; LIQUID CRYSTAL DISPLAYS; METABOLISM;

BIOSENSOR ARRAYS; CLINICAL DIAGNOSTICS; LAB ON A CHIP; ON-CHIP POWER SOURCES; SMART PASSIVE MICROFLUIDICS;

BIOSENSORS;

EID: 2342660255     PISSN: 00189219     EISSN: None     Source Type: Journal    
DOI: 10.1109/JPROC.2003.820548     Document Type: Conference Paper

References (71)

1. E. Vespoorte, "Microfluidic chips for clinical and forensic analysis," Electrophoresis, vol. 23, pp. 677-712, 2002.
2. R. Ehrnstrom, "Miniaturization and integration: Challenges and breakthroughs in microfluidics," Lab. Chip, vol. 2, pp. 26N-30N, 2002.
3. R. Service. "Lab. on a chip: Coming soon: The pocket DNA sequencer." Science, vol. 282, no. 5338, pp. 399-401, 1998.
4. F. Vinet, P. Chaton, and Y. Fouillet, "Microarrays and microfluidic devices: Miniaturized systems for biological analysis." Microelectron. Eng., vol. 61-62, pp. 41-47, 2002.
5. C. Malins, M. Niggemann, and B.D. MacCraith. "Multi-analyte optical chemical sensor employing a plastic substrate." Measure. Sci. Tech., vol. 11, no. 8, pp. 1105-1110, Aug. 1, 2000.
6. P. Bergstrom, K. Wise, S. Patel, and J. Schwank, "A micromachined surface work-function gas sensor for low-pressure oxygen detection," Sens. Actuators B, vol. 42, no. 3, pp. 195-204, Aug. 1997.
7. L. Cao, S. Mantell, and D. Polla, "Design and simulation of an implantable medical drug delivery system using microelectromechanical systems technology," Sens. Actuators, vol. A 94, pp. 117-125, 2001.
8. M. Burns, B. Johnson, S. Brahmasandra, K. Handique, J. Webster, M. Krishnan, T. Sammarco, P. Man, D. Jones, D. Heldsinger, C. Mastrangelo, and D. Burke, "An integrated nanoliter DNA analysis device," Science, vol. 282, pp. 484-487, 1998.
9. P. Grodzinski, R. Liu, B. Chen, J. Blackwell, Y. Liu, D. Rhine, T. Smekal, D, Rhine, T. Smekal, D. Ganser, C. Romero, H. Yu, T. Chan, and N. Krouichinina, "Development of plastic microfluidic devices for sample preparation," Biomed. Microdev., vol. 3, no. 4, pp. 275-283, 2001.
10. T. Dinh, G. Griffin, D. Stokes, and A. Winlenberg, "Multi-functional biochip for medical diagnostics and pathogen detection," Sens. Actuators B. vol. 90, pp. 104-111, 2003.
11. L. Kricka. "Microchips, microarrays, biochips, and nanochips: Personal laboratories for the 21st century," Clin. Chim. Acta, vol. 307, pp. 219-223, 2001.
12. I. Lauks, "Microfabricateil biosensors and microanalytical systems for blood analysis," Acc. Chem. Res., vol. 31, pp. 317-324, 1998.
13. J. Ko et al., "A polymer-based microfluidic device for immunosensing biochips," Lab. Chip, vol. 3, pp. 106-113, 2003.
14. T. Dinh and B. Cullum, "Biosensors and biochips: Advances in biological and medical diagnostics," Fresenius J. Anal. Chem., vol. 366, pp. 540-551, 2000.
15. M. Freemantle, "Downsizing chemistry," Chem. & Eng. News, pp. 27-36, Feb. 22, 1999.
16. D. Figeys and D. Pinto, "Lab-on-a-chip: A revolution in biological and medical sciences," Anal. Chem., vol. 72, pp. 330-335, 2000.
17. S. Shoji and M. Esashi, "Microflow device and systems," J. Micromech. Microeng., vol. 4, pp. 157-171, 1994.
18. G. Kovacs, Micromachined Transducers Sourcehook. New York: WCB-McGraw Hill, 1998.
19. W. Schomburg, J. Fahrenberg, D. Maas, and R. Rapp, "Active valves and pumps for microfluides," J. Micromech. Microeng., vol. 3, pp. 216-218, 1993.
20. C. H. Ahn, T. Henderson, W. Heineman, and B. Halsall, "Development of a generic microfluidic system for electrochemical immunoassay-based remote bio/chemical sensors," in Proc. μ TAS'98 Workshop, pp. 225-230.
21. D. Sadler, K. Oh, C. Ahn, S. Bhansali, and H. T. Henderson, "A new magnetically actuated microvalve for liquid and gas control applications." in Proc. Transducers'99, pp. 1812-1815.
22. M. Hirano, K. Yanagisawa, H. Kuwano, and S. Nakano, "Microvalve with ultra-low leakage," in Proc. 10th Int. Workshop MEMS '97, pp. 323-326.
23. M. Koch, N. Harris, A. Evans, N. White, and A. Brunnschweiler, "A novel micropump design with thick-film piezoelectric actuation," Measure. Sci. Technol., vol. 8, pp. 49-57, 1997.
24. H. Chou, M. Unger, and S. Quake, "A microfabricated rotary pump," Biomed. Microdev., vol. 3, no. 4, pp. 323-330, 2001.
25. S. Zeng, C. Chen, J. Mikkelsen, and J. Santiago, "Fabrication and characterization of electroosmotic micropumps," Sens. Actuators, vol. B 79, pp. 107-114, 2001.
26. G. Fuhr, T. Schnelle, and B. Wagner, "Travelling wave driven microfabricated electrohydrodynamic pumps for liquids," J. Micromech. Microeng., vol. 4, pp. 217-226, 1994.
27. A. Lemoff and A. Lee, "An AC magnetohydrodynamic micropump," Sens. Actuators, vol. B 63, pp. 178-185, 2000.
28. W. Schomburg and B. Scherrer, "3.5 mm thin valves in titanium membranes," J. Micromech. Microeng., vol. 2, pp. 184-186, 1992.
29. A. Terray, J. Oakey, and D. Marr, "Fabrication of colloidal structures for microfluidic applications," Appl. Phys. Lett., vol. 81, no. 9, pp. 1555-1557, 2002.
30. Q. Yu, J. Bauer, J. Moore, and D. Beebe, "Responsive biomimetic hydrogel valve for microfluidics," Appl. Phys. Lett., vol. 78, no. 17, pp. 2589-2591, 2001.
31. N. Jeon, D. Chiu, C. Wargo, H. Wu, I. Choi, J. Anderson, and G. Whitesides, "Design and fabrication of integrated passive valves and pumps for flexible polymer 3-dimensional microfluidic systems," Biomed. Microdev., vol. 4, no. 2, pp. 117-121, 2002.
32. K. Hosokawa, T. Fujii, and I. Endo, "Droplet-based nano/picoliter mixer using hydrophobia microcapillary vent," Proc. 12th IEEE Int. Conf. MEMS '99, pp. 388-393.
33. K. Handique, B. Gogoi, D. Burke, and C. Mastrangelo, "Microfluidic flow control using selective hydrophobia patterning." in Proc. Micromachined Devices and Components, vol. 3224, 1999, pp. 210-220.
34. M. McNeely, M. Spute, N. Tusneem, and A. Oliphant, "Hydrophobic microfluidics," in Proc. Microfluidic Devices and Systems, vol. 3877, 1999, pp. 210-220.
35. M. Madou, Y. Lu, S. Lai, and S. Daunert, "A centrifugal microfluidic platform - A comparison," in Proc. μ TAS 2000 Conf., pp. 565-570.
36. R. Miyake, T. Lammerink, M. Elwenspoek, and J. Fluitman, "Micromixer with fast diffusion," in Proc. MEMS'93, pp. 248-253.
37. D. Beebe, R. Adrian, M. Olsen, M. Stremler, H. Aref, and B. Jo, "Passive mixing in microchannels: Fabrication and flow experiments," Mecanique Ind., vol. 2, no. 4, pp. 343-348, July-Aug. 2001.
38. S. Bohm, K. Greiner, S. Schlautmann, S. Vries, and A. Berg, "A rapid-vortex micromixer for studying high-speed chemical reactions," presented at the UTAS 01, Monterey, CA, 2001.
39. A. Stroock, S. Dertinger, A. Ajdari, I. Mezic, H. Stone, and G. Whitesides, "Chaotic mixer for microchannels." Science, vol. 295, pp. 647-651, 2002.
40. C.-C. Hong, J.-W. Choi, and C. H. Ahn, "A novel in-plane passive micromixer using Coanda effect," in Proc. 5th Int. Conf, Micro Total Analysis Systems 2001, pp. 31-33.
41. J. Brody and P. Yager, "Diffusion-based extraction in a microfabricated device," Sens. Actuators A, vol. 54, no. 1-3, pp. 704-708, 1996.
42. B. Weigl and P. Yager, "Microfluidic diffusion-based separation and detection," Science, vol. 283, pp. 346-347, 1999.
43. T. Desai, D. Hansford, and M. Ferrrari, "Micromachined interfaces: New approaches in cell immunoisolation and bimolecular separation," Biomol. Eng., vol. 17, no. 1, pp. 23-36, 2000.
44. F. Martin and C. Grove, "Microfabricated drug delivery systems: Concepts to improve clinical benefit," Biomed. Microdev., vol. 3, no. 2, pp. 97-108, 2001.
45. T. Nagakura, K. Ishihara, T. Furukawa, K. Masuda, and T. Tsuda, "Auto-regulated osmotic pump for insulin therapy by sensing glucose concentration without energy supply," Sens. Actuators B, vol. 34, no. 1-3, pp. 229-233, 1996.
46. Y. Su, L. Lin, and A. Pisano, "Water-powered, osmotic microactuator," in Proc. IEEE MEMS 2001, pp. 393-396.
47. G. Walker and D. Beebe, "A passive pumping method for microfluidic devices," Lab. Chip, vol. 2, pp. 131-134, 2002.
48. J. McDonald, D. Duffy, J. Anderson, D. Chin, H. Wu, O. Schueller, and G. Whitesides, "Fabrication of microfluidic systems in poly(dimethylsiloxanc), " Eleclrophorcsis, vol. 21, no. 1, pp. 27-40, Jan. 2000, no. 1.
49. T. Fujii, "PDMS - Based microfluidic devices for biomedical applications," Microelectron. Eng., vol. 61-62, pp. 907-914, 2002.
50. L. Lee, M. Madou, K. Koelling, S. Daunert, S. Lai, C. Koh, Y. Juang, Y. Lu, and L. Yu, "Design and fabrication of CD-like microfluidic platforms for diagnostics: Polymer-based microfabrication," Biomed. Microdev., vol. 3, no. 4, pp. 339-351, 2001.
51. H. Becker and C. Gartner, "Polymer microfabrication methods for microfluidic analytical applications," Electrophoresis, vol. 21, pp. 12-26, 2000.
52. H. Becker and L. Locascio, "Polymer microfluidic devices," Talanta, vol. 56, pp. 267-287, 2002.
53. K. Sugita, "Application of photodegradable polymers to imaging and microfabrication technologies: A review of recent research papers in the last 4 years," Prog. Org. Coatings, vol. 31, pp. 87-95, 1997.
54. H. Becke and W. Dietz, "Microfluidic devices for μ TAS applications fabricated by polymer hot embossing," in Proc. SPIE Conf. Microfluidic Devices, 1998, pp. 177-182.
55. S. Metz, R. Holzer, and P. Renaud, "Polyimide-based microfluidic devices," Lab. Chip. vol. 1, pp. 29-34, 2001.
56. Z. Wu, N. Xanthopoulos, F. Reymond, J. Rossier, and H. Girault, "Polymer microchips bonded by oxygen-plasma activation." Electrophoresis, vol. 23, pp. 782-790, 2002.
57. Y. Wang and M. Ferrari, "Surface modification of micromachined silicon filters," J. Mater. Sci., vol. 35, pp. 4923-1930, 2000.
58. J.-W. Choi, S. Kim, R. Trichur, H. J. Cho, A. Puntambekar, R. L. Cole, J. R. Simkins, S. Murugesan, K. S. Kim, J.-B. Lee, G. Beaucage, J. H. Nevin, and C. H. Ahn, "A plastic micro injection molding technique using replaceable mold-disks for disposable microfluidic systems and biochips," in Proc. 5th Int. Conf. Micro Total Analysis Systems 2001, pp. 411-412.
59. R. Trichur, S. Kim, X. Zhu, J. W. Suit, C.-C. Hong, J.-W. Choi, and C. H. Ahn, "Development of plastic microneedles for transdermal interfacing using injection molding techniques," in Proc. 6th Int. Conf. Micro Total Analysis Systems 2002, pp. 395-397.
60. S. Kim, R. Trichur, G. Beaucage, C. H. Ahn, and B. H. Kim, "New plastic microinjection molding technique for extremely tall plastic structures using remote infrared radiation heating method," in Proc. 10th Solid-State Sensor. Actuator and Microsystems Workshop, 2002, pp. 206-209.
61. A. Puntambekar, S. Murugesan, R. Trichur, H. Cho, S. Kim, J. W. Choi, and C. H. Ahn, "Effect of surface modification on thermoplastic fusion bonding for 3-D microfluidics," in Proc. μ TAS 2002, pp. 425-427.
62. C. Ahn, A. Puntambekar, S. M. Lee, H. C. Cho, and C. C. Hong, "Structurally programmable microfluidic systems," in Proc. μ TAS 2000, pp. 205-208.
63. A. Puntambekar, J.-W. Choi, C. H. Ahn, S. Kim, S. Bayyuk, and V. B. Makhijani, "An air-driven fluidic multiplexer integrated with microdispensers," in Proc. 5th Int. Conf. Micro Total Analysis Systems 2001, pp. 78-80.
64. A. Puntambekar, S. Lee, H. J. Cho, and C. H. Ahn, "On-chip microfluidic multiplexers for biochemical reactor and mixers," presented at the IEEE World Congr. Biomedical Physics, Chicago, IL, 2000.
65. A. Puntambekar, H. J. Cho, C.-C. Hong, J.-W. Choi, C. H. Ahn, S. Kim, and V. B. Makhijani, "A new fixed-volume metering microdispenser module based on sPROM's technology," in Tech. Dig. 11th Int. Conf. Solid-State Sensors and Actuators, 2001, pp. 1240-1243.
66. A. Puntambekar, J.-W. Choi, C. H. Ahn, S. Kim, and V. B. Makhijani, "Fixed-volume metering microdispenser module." Lab. Chip, vol. 2, no. 4, pp. 213-218, 2002.
67. C.-C. Hong, J.-W. Choi, and C. H. Ahn, "Disposable air-bursting detonator as an alternative on-chip power source," in Proc. 15th IEEE MEMS Workshop (MEMS'02), Las Vegas. NV, Jan. 20-24, 2002, pp. 240-243.
68. _, "A disposable on-chip air detonator for driving fluids on point-of-care systems," in Proc. 6th Int. Conf.Micro Total Analysis Systems 2002, pp. 949-951.
69. L. C. Clark Jr., "Monitor and control of blood and tissue oxygen tensions." Trans. Amer. Soc. Artif. Internal Organs, vol. 2, pp. 41-49, 1956.
70. C. Gao, J.-W. Choi, M. Dutta, S. Chilukuru, J. H. Nevin, J. Y. Lee, M. G. Bissell, and C. H. Ahn, "A fully integrated biosensor array for measurement of metabolic parameters in human blood," in Proc. 2nd Annu. Int. IEEE-EMBS Special Topic Conf. Microtechnologies in Medicine and Biology. 2002, pp. 223-226.
71. C. Gao, J.-W. Choi, and C. H. Ahn, "A novel glucose biosensor with gel-based solid electrolyte and microheater structure for rapid detection," in Proc. 7th World Congr. Biosensors, 2002, pp. 2-3, 68.