Convection modeling in directional solidification

Comptes Rendus - Mecanique

Volumn 332, Issue 5-6, 2004, Pages 429-445

  Heinrich, Juan C ^a   Poirier, David R ^a  

^a University of Arizona   (United States)

Author keywords

Alliages binaires; Alliages multiconstituants; Binary alloys; Dendritic solidification; Directional solidification; Macros gr gation; Macrosegregation; Multicomponent alloys; Solidification dendritiques; Solidification directionnelle

Indexed keywords

BINARY MIXTURE; CONVECTION; MATHEMATICAL ANALYSIS; MODEL; MODELING; SOLIDIFICATION;

CHEMICAL REACTION; CONFERENCE PAPER; CRYSTAL; MATHEMATICAL MODEL; SIMULATION; SOLIDIFICATION; THERMODYNAMICS;

EID: 2342658400     PISSN: 16310721     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.crme.2004.02.001     Document Type: Conference Paper

References (77)

1. Higginbotham G.J.S. From research to cost-effective directional solidification and single-crystal production - an integrated approach. Mater. Sci. Tech. 2:1986;442-460
2. Frueh C., Poirier D.R., Felicelli S.D. Predicting freckle-defects in directionally solidified Pb-Sn alloys. Mat. Sci. Engrg. A. 328:2002;245-255
3. McLean M. Directionally Solidified Materials for High Temperature Service. 1983;The Metals Society, London
4. Midea T.C., Schmidt D. Casting simulation software survey. Modern Casting. 89:1999;47-51
5. Cruchaga M., Celentano D. Numerical analysis of thermally coupled flow problems with interfaces and phase-change effects. Int. J. Comp. Fluid Dyn. 16:2002;247-262
6. Juric D., Tryggvason G. A front-tracking method for dendritic solidification. J. Comput. Phys. 123:1996;127-148
7. Udaykumar H.S., Mittal R., Shyy W. Computation of solid-liquid phase fronts in the sharp interface limit on fixed grids. J. Comput. Phys. 153:1999;535-574
8. Zhao P., Heinrich J.C. Front - tracking finite element method for dendritic solidification. J. Comput. Phys. 173:2001;765-796
9. Karma A., Rappel W.J. Quantitative phase-field modeling of dendritic growth in two and three dimensions. Phys. Rev. E. 57:1998;4323-4349
10. Ungar L.H., Brown R.A. Cellular interface morphologies in directional solidification IV. The formation of deep cells. Phys. Rev. B. 31:1985;5931-5940
11. Warren J.A., Boettinger W.J. Prediction of dendritic growth and microsegregation patterns in a binary alloy using the phase-field method. Acta Metall. Mater. 43:1995;689-703
12. Zhao P., Vénere M., Heinrich J.C., Poirier D.R. Modeling dendritic growth of a binary alloy. J. Comput. Phys. 188:2003;434-461
13. Kirkaldy J.S., Youdelis W.V. Contribution to the theory of inverse segregation. Trans. TMS-AIME. 212:1958;833-840
14. Flemings M.C., Nereo G.E. Macrosegregation: Part I. Trans. Metall Soc. AIME. 239:1967;1449-1461
15. Flemings M.C., Nereo G.E. Macrosegregation: Part II. Trans. Metall Soc. AIME. 242:1968;41-49
16. Flemings M.C., Nereo G.E. Macrosegregation: Part III. Trans. Metall Soc. AIME. 242:1968;50-55
17. Mehrabian R., Keane M., Flemings M.C. Interdendritic fluid flow and macrosegregation: Influence of gravity. Metall Trans. 1:1970;1209-1220
18. Mehrabian R., Keane M., Flemings M.C. Experiments on macrosegregation and freckle formation. Metall. Trans. 1:1970;3238-3241
19. Kou S., Poirier D.R., Flemings M.C. Macrosegregation in ESR ingots. Electric Furnace Proc. ISS-IAME. 35:1977;221-228
20. Kou S., Poirier D.R., Flemings M.C. Macrosegregation in rotated remelted ingots. Metall. Trans. B. 9:1978;711-719
21. Ridder S.D., Reyes F.C., Chakravorty S., Mehrabian R., Nauman J.D., Chen J.H., Klein H.J. Steady-state segregation and heat flow in ESR. Metall. Trans. B. 9:1978;415-425
22. Fujii T., Poirier D.R., Flemings M.C. Macrosegregation in a multicomponent low alloy steel. Metall. Trans. B. 10:1979;331-339
23. Petrakis D., Flemings M.C., Poirier D.R. Some effects of forced convection on macrosegregation. Brody H.D., Apelian D. Modeling of Castings and Welding Processes. 1981;TMS-AIME, Warrendale, PA
24. Poirier C.D.R. Convection of interdendritic liquid in unidirectionally solidified alloys. Proceedings of the U.S.-Japan Cooperative Science Program Seminar on Solidification Processing, Dedham, MA. 1983
25. Ridder S.D., Kou S., Mehrabian R. Effect of fluid flow on macrosegregation in axi-symmetric ingots. Metall. Trans. B. 12:1981;435-447
26. Maples A.L., Poirier D.R. Convection in the two-phase zone of solidifying alloys. Metall. Trans. B. 15:1984;163-172
27. Poirier D.R., Flemings M.C., Mehrabian R., Weiss V. Modeling macrosegregation in electroslag remelted ingots. Burke J.J., Mehrabian R., Weiss V. Advances in Metal Processing. 1981;Plenum, New York
28. Bennon W.D., Incropera F.P. A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems-I. Model formulation. Int. J. Heat Mass Transfer. 30:1987;2161-2170
29. Ganesan S., Poirier D.R. Conservation of mass and momentum for the flow of interdendritic liquid during solidification. Metall. Trans. B. 21:1990;173-181
30. Poirier D.R., Nandapurkar P.J., Ganesan S. The energy and solute conservation equations for dendritic solidification. Metall. Trans. B. 22:1991;889-900
31. Beckermann C., Viskanta R. Mathematical modeling of transport phenomena during solidification. Appl. Mech. Rev. 46:1993;1-27
32. Bennon W.D., Incropera F.P. A continuum model for momentum, heat and species transport in binary solid-liquid phase change systems-II; applications to solidification in a rectangular cavity. Int. J. Heat Mass Transfer. 30:1987;2171-2187
33. Felicelli S.D., Heinrich J.C., Poirier D.R. Simulation of freckles during vertical solidification of a binary alloy. Metall. Trans. B. 22:1991;847-859
34. Amberg G. Computation of macrosegregation in an iron-carbon cast. Int. J. Heat Mass Transfer. 34:1991;217-227
35. Xu D., Li Q. Numerical method for solution of strongly coupled binary alloy solidification problems. Numer. Heat Transfer A. 20:1991;181-201
36. Chiang K.C., Tsai H.L. Shrinkage induced fluid flow and domain change in two-dimensional alloy solidification. Int. J. Heat Mass Transfer. 35:1992;1763-1770
37. Schneider M.C., Beckermann C. A numerical study of the combined effects of microsegregation, mushy zone permeability and flow, caused by volume contraction and thermosolutal convection, on macrosegregation and eutectic formation in binary alloy solidification. Int. J. Heat Mass Transfer. 38:1995;3455-3473
38. Swaminathan C.R., Voller V.R. Towards a general numerical scheme for solidification systems. Int. J. Heat Mass Transfer. 40:1997;2859-2868
39. Naterer G.F. Simultaneous pressure-velocity coupling in the two-phase zone for solidification shrinkage in an open casting. Model. Simul. Mater. Sci. Engrg. 5:1997;595-613
40. Ahmad N., Combeau H., Desbiolles J.-L., Jalanti T., Lesoult G., Rappaz J., Rappaz M., Stomp C. Numerical simulation of macrosegregation: a comparison between finite volume method and finite element method predictions and a confrontation with experiments. Metall. Mater. Trans. A. 29:1998;617-630
41. Voller V., Swaminathan C.M., Thomas B.G. Fixed grid techniques for phase change problems: a review. Int. J. Numer. Methods Engrg. 30:1990;875-898
42. Beckermann C. Modeling of macrosegregation: applications and future needs. Int. Mater. Rev. 47:2002;243-261
43. J.C. Heinrich, D.R. Poirier, Effect of volume change during directional solidification of binary alloys, Model. Simul. Mater. Sci. Engrg. (2004), in press
44. Nield D.A. The boundary correction for the Rayleigh-Darcy problem: limitations of the Brinkman equation. J. Fluid Mech. 128:1983;37-46
45. Nield D.A., Joseph D.D. Effect of quadratic drag on convection in a saturated porous medium. Phys. Fluids. 28:1985;995-997
46. Beckerman C., Viskanta R. Double-diffusive convection during dendritic solidification of a binary mixture. Phys.-Chem. Hydrodyn. 10:1988;195-213
47. Felicelli S.D., Heinrich J.C., Poirier D.R. Finite element analysis of directional solidification of multicomponent alloys. Int. J. Numer. Methods Fluids. 27:1998;207-227
48. Heinrich J.C., McBride E. Calculation of pressure in a mushy zone. Int. J. Numer. Methods Engrg. 47:2000;735-747
49. Amberg G. Parameter ranges in binary solidification from vertical boundaries. Int. J. Heat Mass Transfer. 40:1997;2565-2578
50. Heinrich J.C., Pepper D.W. Intermediate Finite Element Method; Fluid Flow and Heat Transfer Applications. 1999;Taylor & Francis, Philadelphia
51. Felicelli S.D., Heinrich J.C., Poirier D.R. Numerical model for dendritic solidification of binary alloys. Numer. Heat Transfer B. 23:1993;461-481
52. Felicelli S.D., Heinrich J.C., Poirier D.R. Finite element analysis of directional solidification of multicomponent alloys. Int. J. Numer. Methods Fluids. 27:1998;207-227
53. McBride E., Heinrich J.C., Poirier D.R. Numerical simulation of incompressible flow driven by density variations during phase change. Int. J. Numer. Methods Fluids. 31:1999;787-800
54. Nielson D.G., Incropera F.P. Three-dimensional considerations of unidirectional solidification in a binary liquid. Numer. Heat Transfer. 23:1993;1-20
55. Felicelli S.D., Heinrich J.C., Poirier D.R. Three-dimensional simulations of freckles in binary alloys. J. Crystal Growth. 191:1997;879-888
56. Felicelli S.D., Poirier D.R., Heinrich J.C. Modeling freckle formation in three dimensions during solidification of multicomponent alloys. Metall. Mater. Trans. B. 29:1998;847-855
57. Xu D., Li Q. Gravity- and solidification-shrinkage-induced liquid flow in a horizontally solidified alloy ingot. Numer. Heat Transfer A. 20:1991;203-221
58. Shahani H., Amberg G., Fredriksson H. On the formation of macrosegregations in unidirectionally solidified Sn-Pb and Pb-Sn alloys. Metall. Trans. A. 23:1992;2301-2311
59. D.G. Westra, Simulation of directional solidification in a binary alloy using the fractional step method, Ph.D. Dissertation, The University of Arizona, Tucson, 2003
60. Bejan A. Convective heat transfer in porous media. Kakacs S., Shah R.K., Aung W. Handbook of Single Phase Convective Heat Transfer. 1987;Wiley, New York
61. Poirier D.R. Permeability for flow of interdendritic liquid in columnar-dendritic alloys. Metall. Trans. B. 18:1987;245-255
62. Ganesan S., Chan C.L., Poirier D.R. Permeability of flow parallel to dendrite arms. Mater. Sci. Engrg. A. 151:1992;97-105
63. Bhat M.S., Poirier D.R., Heinrich J.C. Permeability for cross flow through columnar-dendritic alloys. Metall. Mater. Trans. B. 26:1995;1049-1056
64. Heinrich J.C., Poirier D.R., Nagelhout D.F. Mesh generation and flow calculations in highly contorted geometries. Comp. Methods Appl. Mech. Engrg. 133:1996;79-92
65. Poirier D.R., Heinrich J.C. Continuum model for predicting macrosegregation in dendritic alloys. Mater. Character. 32:1994;287-298
66. Sinha S.K., Sundararajan T., Garg V.K. A variable property analysis of alloy solidification using the anisotropic porous medium approach. Int. J. Heat Mass Transfer. 35:1992;2865-2877
67. Goyeau B., Bennihaddadene T., Gobin D., Quintard M. Averaged momentum equation for flow through a nonhomogeneous porous structure. Transp. Porous Media. 28:1997;19-50
68. Motegi T., Ohno A. Inverse segregation in unidirectionally solidified Al-Cu alloy ingots. Trans. Japan Inst. Metals. 25:1984;122-132
69. Worster M.G. Instabilities of the liquid and mushy regions during solidification of alloys. J. Fluid Mech. 237:1992;649-669
70. Chen C.F., Chen F. Experimental study of directional solidification of aqueous ammonium chloride solutions. J. Fluid Mech. 227:1991;567-586
71. Schulze T.P., Worster M.G. A numerical investigation of steady convection in mushy layers during the directional solidification of binary alloys. J. Fluid Mech. 356:1998;199-220
72. Huang H.W., Heinrich J.C., Poirier D.R. Simulation of directional solidification with steep thermal gradients. Model. Simul. Mater. Sci. Engrg. 4:1996;245-259
73. Tewari S.N., Shah R. Macrosegregation during steady-state arrayed growth of dendrites in directionally solidified Pb-Sn alloys. Metall. Trans. 23A:1992;3383-3392
74. Felicelli S.D., Poirier D.R., Heinrich J.C. Macrosegregation patterns in multicomponent Ni-base superalloys. J. Crystal Growth. 177:1996;145-161
75. Felicelli S.D., Poirier D.R., Giamei A.F., Heinrich J.C. Simulation of the solidification of DS and SC superalloys. JOM. 49:1997;21-25
76. Schneider M.C., Beckermann C. Formation of macrosegregation by multicomponent thermosolutal convection during solidification of steel. Metall. Mater. Trans. A. 26:1995;2373-2388
77. Felicelli S.D., Sung P.K., Poirier D.R., Heinrich J.C. Transport properties and transport phenomena in casting nickel superalloys. Int. J. Thermophys. 19:1998;1657-1669