Micro-wear features on unique 100-Mrad cups: Two retrieved cups compared to hip simulator wear study

Acta Orthopaedica Scandinavica

Volumn 75, Issue 2, 2004, Pages 134-141

  Yamamoto, Kengo ^a   Masaoka, Toshinori ^a   Manaka, Masakazu ^a   Oonishi, Hironobu ^b   Clarke, Ian ^c,d   Shoji, Hiromu ^c,d   Kawanabe, Keiichi ^c,d   Imakiire, Atsuhiro ^a  

^a TOKYO MEDICAL UNIVERSITY   (Japan)

^b Tominaga Hospital   (Japan)

^c LOMA LINDA UNIVERSITY MEDICAL CENTER   (United States)

^d KYOTO UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

POLYETHYLENE;

ACETABULOPLASTY; ARTICLE; BIOCOMPATIBILITY; CROSS LINKING; HIP PROSTHESIS; IMPLANT; PROSTHESIS; RADIATION DOSE; SIMULATOR;

BIOCOMPATIBLE MATERIALS; EQUIPMENT FAILURE ANALYSIS; HIP PROSTHESIS; HUMANS; MICROSCOPY, ELECTRON, SCANNING; POLYETHYLENE; PROSTHESIS FAILURE;

EID: 2342653568     PISSN: 00016470     EISSN: None     Source Type: Journal    
DOI: 10.1080/00016470412331294375     Document Type: Article

References (27)

1. Atkinson J R, Dowson D, Isaac G H, Wroblewski B M. Laboratory wear tests and clinical observation of the penetration of femoral heads into acetabular cups 21 in total replacement hip joints-A microscopical study of the surfaces of Charnley polyethylene acetabular sockets. Wear 1985; 104: 217-24.
2. Bragdon C R, O'Connor D O, Lowenstein J D, Jasty M, Syniuta W D. The importance of multidirectional motion on the wear of polyethylene. Proc Instn Mech Engrs 1996; 104: 217-24.
3. Bragdon C R, Harris W H, Jasty M. Marked improvement in the wear resistance of a new form of UHMWPE in a physiologic hip simulator. J Bone Joint Surg (Br) (Suppl 2) 1997; 79: 138.
4. Chiesa R, Tanzi M C, Alfonsi S, Paracchini S, Moscatelli M, Cigada A. Sterilization effects on highly crosslinked UHMWPE. Trans Soc Biomater 1999: 213.
5. Clarke I C, Good V, Williams P, Oparaugo P, Oonishi H, Fujisawa W. Simulator wear study of highodose gamma-irradiated UHMWPE cups. Trans Soc Biomater 1997: 71.
6. Clarke I C, Manaka P, Pezzotti G, Kim Y-H, Ries M, Sagano N, Sedel L, Delaney C, Nissa B B, Donaldson T, Gustafson G A. Current status of zircomia used in total hip implants. J Bone Joint Surg (Am) 2003; 85: 73-84.
7. Cooper J R, Dowson D, Fisher J. Macroscopic and microscopic wear mechanisms in ultra-high molecular weight polyethylene. Wear 1993; 162-164: 378-84.
8. Dowling J M, Atkinson J R, Dowson D, Charnley J. The characteristics of acetabular cups worn in the human body. J Bone Joint Surg (Br) 1978; 60: 375-82.
9. Gillis A M, Schmieg J J, Bhattacharyya S, Li S. An independent evaluation of the mechanical, chemical and fracture properties of UHMWPE cross linked by 34 different conditions. Trans Soc Biomater 1999: 216.
10. Grobbelaar C J, Weber F A, Spirakis A, Du Plessis T A, Cappaert G, Cakic J N. Clinical experience with gamma irradiation crosslinked polyethylene. A 14 to 20 year follow-up report. SA Bone Joint Surg 1999; 9: 140-7.
11. McKellop H A. Wear modes, mechanisms, damage, and debris. Separating cause from effect in the wear of total hip replacements. In: Total hip revision surgery (Ed. Jorge O, et al.). Raven Press, Ltd. New York 1995; 2: 21-39.
12. McKellop H, Shen F W, Yu Y J, Lu B, Salovey R. Effect of sterilization methods on the wear rate of UHMW polyethylene acetabular cups in a hip simulator. Trans Orthop Res Soc 1997: 94.
13. Muratoglu O K, Bragdon C R, O'Connor C O, Jasty M, Harris W H. The effect of irradiation temperature on the crosslinking of UHMWPE. Trans Soc Biomater 1999a: 212.
14. Muratoglu O K, Mounib L, Harris W H. Identification and quantification of radiation in UHMWPE. Trans Soc Biomater 1999b: 217.
15. Oonishi H, Igaki H, Takayama Y. Wear resistance of gamma-ray irradiated UHMWPE socket in total hip prosthesis-Wear and long term clinical results. Trans World Biomater Cong 1988: 588.
16. Oonishi H, Takayama Y, Tsuji E. The low wear of cross-linked polyethylene socket in total hip prosthesis. In: Handbook of biomaterials and bioengineering (Ed. Wise D L, et al.) Marcel Dekker, Inc. New York 1995; A(2): 1853-68.
17. Oonishi H, Saitoh H, Fujisawa A, Masuda S, Kadoya Y, Clarke I C, Kawanabe K. Physical and chemical characteristics of high-dose gamma-irradiated sockets-retrieval study after long term implantation. Trans Orthop Res Soc 1999a: 75.
18. Oonishi H, Masuda S, Amino H, Ueno M, Clarke I C, Good V. Gamma irradiation and polyethylene. Trans Orthop Res Meeting of the Japanese Orthop Association 1999b: 1459.
19. Paul J P. Forces transmitted by joints in the human body. Proc Instn Mech Engrs 1966; 181: 8-15.
20. Schmalzried T P, Jasty M, Harris W H. Periprosthetic bone loss in total hip arthroplasty. J Bone Joint Surg (Am) 1992; 74: 849-63.
21. Spiegelberg S H, Kurtz S M, Edidin A A. Effects on molecular weight distribution on the network properties of radiation and chemically crosslinked ultra high molecular weight polyethylene. Trans Soc Biomater 1999: 215.
22. Walker S P, Bullough P G. The effects of friction and wear in artificial joints. Orthop Clin North Am 1973; 4 (2): 275-93.
23. Wang A, Sun D C, Starc C, Dumbleton J H. Effect of sterilization methods on the wear of ultra-high molecular weight polyethylene acetabular cups. Trans World Biomater Cong 1996a: 198.
24. Wang A, Starke C, Dumbleton J H. Mechanistic and morphological origins of ultra-high molecular weight polyethylene wear debris in total joint replacement prosthesis. Proc Instn Mech Engrs 1996b; 210: 141-55.
25. Wroblewski B M, Siney P D, Dowson D, Collons S N. Prospective clinical and joint simulator studies of a new total hip arthroplasty using alumina ceramic heads and cross-linked polyethylene cups. J Bone Joint Surg (Br) 1996; 60: 280-5.
26. Wroblewski B M, Siney P D, Fleming P A. Wear of ultra high molecular weigh polyethylene cup in the Charnley low friction arthroplasty using metal and ceramic 22.225 mm diameter head. Trans Soc Biomater 2000.
27. Yamamoto K, Oonishi H, Kawanabe K, Masuda S, Williams P, Yu L, Clarke I C. SEM wear-mode comparison of extensively cross-linked PE-cups: in-vitro and ex-vivo. Trans Soc Biomater 1999: 503.