Laser cladding

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 5147, Issue , 2003, Pages 385-392

  Vilar, R ^a  

^a INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

Laser cladding; Laser materials processing; Laser powder deposition; Laser surface treatment

Indexed keywords

CLADDING (COATING); MELTING; PROTECTIVE COATINGS; SURFACE PROPERTIES; SURFACE TREATMENT;

LASER CLADDING; LASER MATERIALS PROCESSING; LASER POWDER DEPOSITION;

LASER BEAM EFFECTS;

EID: 2342637861     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.543724     Document Type: Conference Paper

References (60)

1. R. Vilar, "Laser cladding", Journal of Laser Applications, 11, pp. 64-79, 1999.
2. J. Mazumder, "Non-equilibrium synthesis by laser for tailored surfaces", Laser processing: Surface treatment and film deposition, J. Mazumder, O. Conde, R. Villar and W.B. Steen, pp. 47-75, Kluwer Academic Publishers, Dordrecht, 1996.
3. H. Engstrom, C.M. Hansson, M. Johansson and et al., "Combined corrosion and wear resistance of laser-clad stellite 6b", ECLAT'88 Laser Treatment of Materials, pp. 164-168, DVS-Verlag, Düsseldorf, Germany, 1988.
4. A. Frenk and W. Kurz, "High-speed laser cladding - solidification conditions and microstructure of a cobalt-based alloy", Materials Science and Engineering A - Structural Materials, 173, pp. 339-342, 1993.
5. A. Frenk, N. Henchoz and W. Kurz, "Laser cladding of a cobalt-based alloy - processing parameters and microstructure", Zeitschrift für Metallkunde, 84, pp. 886-892, 1993.
6. A. Frenk and W. Kurz, "Microstructural effects on the sliding wear-resistance of a cobalt-based alloy", Wear, 174, pp. 81-91, 1994.
7. V.M. Weerasinghe, W.M. Steen and D.R.F. West, "Laser deposited austenitic stainless steel clad layers", Surface Engineering, 3, pp. 147-153, 1987.
8. M.A. Anjos, R. Vilar and Y.Y. Qiu, "Laser cladding of ASTM S31254 stainless-steel on a plain carbon-steel substrate", Surface and Coatings Technology, 92, pp. 142-149, 1997.
9. R. Li, M.G.S. Ferreira, M.A. Anjos and R. Vilar, "Localized corrosion performance of laser surface cladded UNS S44700 superferritic stainless steel on mild steel", Surface and Coatings Technology, 88, pp. 96-102, 1996.
10. 2 laser", Metals Technology, pp. 232-237, 1980.
11. C.R. Ribaudo, J. Mazumder and D.W. Hetzner, "Laser-clad NiAlCrHf alloys with improved alumina scale retention", Metallurgical Transactions B, 23, pp. 513-522, 1992.
12. Y. Liu, J. Mazumder and K. Shibata, "Laser cladding of Ni-Al bronze on Al-alloy AA333", Metallurgical and Materials Transactions B, 25, pp. 749-759, 1994.
13. R.C. Gassmann and M.F. Modest, "Laser cladding of partially yttria-stabilized zirconia on titanium, nickel and steel alloys", Laser Materials Processing, T.D. McCay, A. Matsunawa and H. Hugel, pp. 125-134, Bellingham: Spie - International Soc Optical Engineering, 1994.
14. T.N. Baker, H. Xin, C. Hu and S. Mridha, "Design of surface in-situ metal-ceramic composite formation via laser treatment", Materials Science and Technology, 10, pp. 536-544, 1994.
15. A. Schussler and K.H. Zum Gahr, "Ceramic-metal composite surface-layers by laser processing", International Journal Materials Production Technology, 8, pp. 213-219, 1993.
16. R. Colaço and R. Vilar, "Development of composite wear resistant coatings using a laser rapid-alloy-prototyping technique", 3rd LANE 2001, Laser Assisted Net Shape Engineering 3, M. Geiger and A. Otto, pp. 169-178, Meisenbach-Verlag, Erlangen, Germany, 2001.
17. D. Carvalho, S. Cardoso and R. Vilar, "Amorphization of Zr60A115Ni25 surface layers by laser processing for corrosion resistance", Scripta Materialia, 37, pp. 523-527, 1997.
18. F. Audebert, R. Colaço, R. Vilar and H. Sirkin, "Laser cladding of quasicrystalline alloys", Scripta Materialia, 40, pp. 551-557, 1999.
19. M. Riabkina-Fishman, N. Sherbaum and J. Zahavi, "Laser cladding and alloying for refurbishing worn machine parts", High Temp Materials Process, 15, pp. 201-205, 1996.
20. P.A. Carvalho, N. Braz, R. Vilar, M.M. Pontinha and M.G.S. Ferreira, "Characterization of Co-Ni-Al alloys obtained by variable powder feed rate laser cladding", LAMP'92 - International Conference on Laser Advanced Materials Processing - Science and Applications, A. Matsunawa and S. Katayama, 2, pp. 825-830, High Temperature Society of Japan, Nagaoka, Japan, 1992.
21. P.A. Carvalho, N. Braz, M.M. Pontinha, M.G.S. Ferreira, W.M. Steen, R. Vilar and K.G. Watkins, "Automated workstation for variable composition laser cladding - its use for rapid alloy scanning", Surface and Coatings Technology, 72, pp. 62-70, 1995.
22. J.H. Abboud, R.D. Rawlings and D.R.F. West, "Functionally graded nickel-aluminide and iron-aluminide coatings produced via laser cladding", Journal of Materials Science, 30, pp. 5931-5938, 1995.
23. J.L. Koch and J. Mazumder, "Rapid prototyping by laser cladding", ICALEO 93 - Laser Materials Processing, P. Denney, I. Miyamoto and B.L. Mordike, pp. 556-565, Bellingham: Spie - International Soc Optical Engineering, 1994.
24. M. Murphy, C. Lee and W.M. Steen, "Studies in rapid prototyping by laser-surface cladding", ICALEO 93 -Laser Materials Processing, P. Denney, I. Miyamoto and B.L. Mordike, pp. 882-892, Spie - International Society Optical Engineering, Bellingham, WA, USA, 1994.
25. M. Gremaud, J.-D. Wagnière, A. Zryd and W. Kurz, "Laser metal forming: Process fundamentals", Surface Engineering, 12, pp. 251-259, 1996.
26. J.O. Milewski, G.K. Lewis, D.J. Thoma, G.I. Keel, R.B. Nemec and R.A. Reinert, "Direct light fabrication of a solid metal hemisphere using a 5-axis powder deposition", J. Materials Processing Technology, 75, pp. 165-172, 1998.
27. J. Mazumder, A. Schifferer and J. Choi, "Direct materials deposition - designed macro and microstructure", Materials Research Innovations, 3, pp. 118-131, 1999.
28. J.W. Sears, "Direct laser powder deposition state-of-the-art", Powder Materials: Current Research and Industrial Practices, pp. 213-226, TMS, Warrendale, PA, 1999.
29. L. Xue and M.U. Islam, "Free-form laser consolidation for producing metallurgically sound functional components", J. Laser Applications, 12, pp. 160-165, 2000.
30. R. Vilar, "Laser cladding", International Journal of Powder Metallurgy, 37, pp. 31-48, 2001.
31. V.M. Weerasinghe and W.M. Steen, "Laser cladding with pneumatic powder delivery", Applied laser tooling, M.P.A. O.D.D. Soares, pp. 183-211, Martinus Nijhoff Publishers, Dordrecht, 1987.
32. V.M. Weerasinghe and W.M. Steen, "Computer simulation model for laser cladding", Transport phenomena in materials processing, pp. 15-23, ASME, New York, 1983.
33. A.F.A. Hoadley and M. Rappaz, "A thermal-model of laser cladding by powder injection", Metallurgical Transactions B, 23, pp. 631-642, 1992.
34. M. Picasso, C.F. Marsden, J.D. Wagnière, A. Frenk and M. Rappaz, "A simple but realistic model for laser cladding", Metallurgical and Materials Transactions B, 25, pp. 281-291, 1994.
35. F. Lemoine, D.F. Grevey and A.B. Vannes, "Cross-section modeling of pulsed nd-yag laser cladding", Laser Materials Processing and Machining, R.J. Ahlers, P. Hoffmann, H. Lindl and R. Rothe, 2246, pp. 37-44, Spie - International Society Optical Engineering, Bellingham, WA, USA, 1994.
36. W.B. Li, H. Engstrom, J. Powell, Z. Tan and C. Magnusson, "Redistribution of the beam power in laser cladding by powder injection", Lasers in Engineering, 5, pp. 175-183, 1996.
37. O.O. Diniz Neto and R. Vilar, "Effects caused by the geometric parameters of the laser and particle beams on laser beam attenuation and on the temperature distribution of particles reaching the substrate in laser surface treatments", Lasers in Engineering, 11, pp. 219-232, 2001.
38. O.O. Diniz Neto and R. Vilar, "Physical-computational model to describe the interaction between a laser beam and a powder jet in laser surface processing", Journal of Laser Applications, 14, pp. 46-51, 2002.
39. M.J. Aziz, "Modeling and measurements of solute trapping", Laser treatment of metals, C.W. Draper and P. Mazzoldi, pp. 649-661, Martinus Nijhoff Publishers, Dordrecht, 1986.
40. P. Gilgien and W. Kurz, "Microstructure and phase selection in rapid laser processing", Laser processing: Surface treatment and thin film deposition, J. Mazumder, O. Conde, R. Vilar and W.M. Steen, pp. 77-92, Kluwer Academic Publishers, Dordrecht, 1996.
41. M. Gaumann, C. Bezençon, P. Canalis and W. Kurz, "Single-crystal laser deposition of superalloys: Processing-microstructure maps", Acta Materialia, 49, pp. 1015-1062, 2001.
42. M. Rappaz, S.A. David, J.M. Vitek and L.A. Boatner, "Development of microstructures in Fe-15Ni-15Cr single crystal electron beam welds", Metallurgical Transactions A, 20, pp. 1125-1138, 1989.
43. M. Rappaz, S.A. David, J.M. Vitek and L.A. Boatner, "Analysis of solidification microstructures in Fe-Ni-Cr single-crystal welds", Metallurgical Transactions A, 21, pp. 1767-1782, 1990.
44. M. Rappaz, S.A. David, J.M. Vitek and L.A. Boatner, "Microstructure of stainless steel single-crystal electron beam welds", Metallurgical Transactions A, 21, pp. 1753-1766, 1990.
45. W. Kurz and R. Trivedi, "Microstructure and phase selection in laser treatment of materials", Transactions of ASME, 114, pp. 450-458, 1992.
46. W. Kurz and R. Trivedi, "Rapid solidification processing and microstructure formation", Materials Science and Engineering, A179/A180, pp. 46-51, 1994.
47. P. Gilgien and W. Kurz, "Microstructure selection in binary and ternary alloys", Materials Science and Engineering, A178, pp. 199-201, 1994.
48. R. Colaço and R. Vilar, "Phase selection during solidification of AISI 420 and AISI 440C tool steels", Surface Engineering, 12, pp. 319-325, 1996.
49. R. Colaço and R. Vilar, "Phase selection during laser surface melting of martensitic stainless tool steels", Scripta Materialia, 36, pp. 199-205, 1997.
50. K.C. Antony, "Wear-resistant cobalt-base alloys", Journal of Metals, 35, pp. 52-60, 1983.
51. J.L.D.M.v. Otterloo and J.T.M.D. Hosson, "Microstructure and abrasive wear of cobalt-based laser coatings", Scripta Materialia, 36, pp. 239-245, 1997.
52. R. Colaço, C. Pina and R. Vilar, "Influence of the processing conditions on the abrasive wear behaviour of a laser surface melted tool steel", Scripta Materialia, 41, pp. 715-721, 1999.
53. K.P. Cooper and J.D. Ayers, "Laser melt-particle injection processing", Surface Engineering, 1, pp. 263-272, 1985.
54. S. Nowotny, A. Richter and K. Tangermann, "Surface protection of light metals by one-step laser cladding with oxide ceramics", Journal of Thermal Spray Technology, 8, pp. 258-262, 1999.
55. R. Colaço and R. Vilar, "Effect of the processing parameters on the proportion of retained austenite in laser surface melted tool steels", Journal Materials Science Letters, 17, pp. 563-567, 1998.
56. A. Schaeffler, "Constitution diagram for stainless steel weld metal", Metal Progress, 56, pp. 680-680B, 1949.
57. J.W. Sears, "Solid freeform fabrication technologies: Rapid prototyping - rapid manufacturing", Inter. J. Powder Metall., 37, pp. 29-30, 2001.
58. R. Colaço and R. Vilar, "Effect of laser surface melting on the tempering behaviour of DIN X42Cr13 stainless tool steel", Scripta Materialia, 38, pp. 107-113, 1997.
59. L. Costa, R. Vilar, A. Deus and T. Reti, "Simulation of the phase transformation kinetics in metal parts deposited by laser cladding", International Conference on Metal Powder Deposition for Rapid Manufacturing, pp. 172-179, Metal Powder Industries Federation, San Antonio, Texas, 2002.
60. O.D. Sherby, J.L. Lytton and J.E. Dorn, "Activation energies for creep of high-purity aluminum", Acta Metallurgica 5, pp. 219-227, 1957.