Benchmarking the Formation Damage of Drilling Fluids

Proceedings - SPE International Symposium on Formation Damage Control

Volumn , Issue , 2004, Pages 701-711

  Van Der Zwaag, C H ^a  

^a SINTEF   (Norway)

Author keywords

[No Author keywords available]

Indexed keywords

FORMATION DAMAGES; STATIC INVASION; WELLBORE SCALES;

BENCHMARKING; BOREHOLES; FILTRATION; FLOCCULATION; OIL FIELDS; PARTICLE SIZE ANALYSIS; PETROLEUM RESERVOIRS; STEADY FLOW;

DRILLING FLUIDS;

EID: 2342440127     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (30)

1. Marshall D.S. et al. (1997) "Development of a Recommended Practice for Formation Damage Testing", paper SPE 38154 pres. at the 1999 SPE EFDC, The Hague, June 2-3.
2. Marshall D.S. et al (1999) "Return Permeability: A Detailed Comparative Study", paper SPE 54763 pres, at the 1999 SPE EFDC, The Hague, 31 May - 1 June.
3. Bailey, L. (1998), "Filtercake Integrity and Reservoir Damage", paper SPE 39429 presented at the SPE International Symposium on Formation Damage, Lafayette, 18-19 February
4. Beatty T., et al. (1993), "Core Tests Help Prevent Formation Damage in Horizontal Wells", Oil and Gas Journal, Aug. 2, p.64-70
5. Chesser, B.G. et al. (1994), "Dynamic and Static Filtrate-loss Techniques for Monitoring Filter-cake Quality Improves Drilling Fluid Performance", SPE Drilling and Completion, September, p. 189-192
6. Cobianco, S. et al. (2001), "New Solids-Free Drill-in Fluid for Low Permeability Reservoirs", paper SPE 64979 presented at the SPE International Symposium on Oilfield Chemistry, Housto, 13-16 February.
7. Fisk, J.V. and Jamison, D.E. (1989), "Physical Properties of Drilling Fluids at High Temperature and Pressures", SPE Drilling Engineering, December, 341-346.
8. Francis, P.A. et al. (1995), "Visualisation of Drilling Induced Formation Damage Mechanisms using Reservoir Conditions Coreflood Testing", Paper 30088, European Formation Damage Control Conference (May 1995).
9. Gruber and Adair (1995), "New Laboratory Procedures for Evaluation of Drilling Induced Formation Damage and Horizontal Well Perofrmance", Journal of Canadian Petroleum Technology, 34, no. 5, May, 27-32
10. Jiao, D. and Sharma, M. (1992), "Formation Damage Due to Static and Dynamic Filtration of Water-Based Muds," paper SPE 23823 presented at the International Symposium on Formation Damage Control, Lafayette, 26-27 February.
11. Krueger, R.F. (1963), "Evaluation of Drilling Fluid Filter Loss Additives Under Dynamic Conditions", Journal of Petroleum Technology, January, p.90-98
12. Leerlooijer, K. et al (1996) "Filtration Control, Mud Design and Well Productivity", paper SPE 31079 presented at the SPE Formation Damage Control Symposium, Lafayette, 14-15 February.
13. Longeron, D. et al. (1995), "An Integrated Experimental Approach for Evaluating Formation Damage Due to Drilling and Completion Fluids" paper SPE 30089 presented at the European Formation Damage Control Conference Hague, the Netherlands, 15-16 May
14. Marx, C. and Rahman, S.S. (1987), "Evaluation of Formation Damage by Drilling Fluids, Specifically in Pressure Reduced Formations", Journal of Petroleum Technology, November, 1449-1452
15. Outmans, (1963): "Mechanics of Static and Dynamic Filtration in the Borehole", Society of Petroleum Engineers Journal, September, 236-244.
16. Peden J.M. et al. (1982), "The Analysis of the Dynamic Filtration and Permeability Impairment Characteristics of Inhibited Water Based Muds", paper SPE 10655 presented at the SPE Formation Damage Control Symposium, Lafayette, 24-25 March.
17. Roodhart, L.P. (1985) "Fracturing Fluids: Fluid Loss Measurements under Dynamic Conditions", Society of Petroleum Engineers Journal, October, 629-636
18. Vaussard A. et al. (1986), "An Experimental Study of Drilling Fluids Dynamic Filtration", paper SPE 15412 presented at the 61st Annual Technical Conference and Exhibition of the SPE, New Orleans, October 5-8.
19. Zeilinger S. et al. (2001; "The Effect of Shear Rate on the Static and Dynamic Fluid-loss Behaviour of Drilling Fluids", paper AADE 01-NC-HO-53 National Drilling Conference Houston, (March 2001).
20. van der Zwaag, C.H. et al. (1997), "New Methodology to Investigate Formation Damage Using Non-Destructive Analytical Tools", SPE paper 38161 pres. At the SPE EFDC, The Hague, June 2-3
21. Breitmeier, J.M.et al. (1989), "Investigation of Radial Invasion of Mud Filtrate in Porous Media", Society of Professional Well Log Analysts Logging Symposium, 30th, Denver, Col., Transactions, p. S1-S22.
22. van der Zwaag, C.H. et al. (2001) "The Effect of Current and Future Drilling Fluid Systems on Core Analysis", Oil Gas European Magazine, Vol. 27, 4, 16-22
23. Watson, R.B. and Nelson A.C. (2003), "Representativ Laboratory Testing Procedures for Selecting Drilling Fluids" paper SPE 82300 presented at the European Formation Damage Conference, The Hague, 13-14 May.
24. Roodhart, L.P. (1985), "Fracturing Fluids: Fluid-Loss Measurements under Dynamic Conditions", paper SPE 11900, SPE Journal, p.629.
25. Phelps, G.D. (1995) "Computation of Mud Filtrate Invasion Profiles", The Journal of Canadian Petroleum Technology, 34, No. 1, p. 18-27.
26. Yildiz, T. (2003), "Assessment of Total Skin Factor in Perforated Wells", paper SPE 82249 presented at the SPE European Formation Damage Conference, The Hague, 13-14 May.
27. Hawkins, M.F. (1956), "A Note on the Skin Effect", Petroleum Transactions AIME, Tech.Note 389, Vol. 207, p.356-357
28. Golan, M. and Whitson, C.H. (1991), Well Performance, PTR Prentice Hall Inc.
29. Amaeful, J.O. et al. (1988), "Advances in Formation Damage Assessment and Control Strategies", paper no. 88-39-65 presented at the 39th Annual Technical Meeting of the Petroleum Society of CIM, Clagary, June 12-16.
30. Ding, Y. et al. (2002):, "Modelling of Both Near-Wellbore Damage and Natural Cleanup of Horizontal Wells Drilled with a Water - Based Mud" Paper SPE 73733 International Symposium on Formation Damage Control, Lafayette, 20-21 February.