Analysis of the sensitivity of FEM predictions to numerical parameters in deep drawing simulations

European Journal of Mechanics, A/Solids

Volumn 24, Issue 4, 2005, Pages 614-629

  Duchêne, Laurent ^a   Habraken, Anne Marie ^b  

^a ROYAL MILITARY ACADEMY   (Belgium)

^b UNIVERSITY OF LIÈGE   (Belgium)

Author keywords

Deep drawing; Finite element analysis; Texture

Indexed keywords

ANISOTROPY; COMPUTER SIMULATION; FINITE ELEMENT METHOD; GEOMETRY; HARDENING; PARAMETER ESTIMATION; PLASTIC FLOW; SENSITIVITY ANALYSIS; STEEL SHEET; TEXTURES;

FORMING PROCESS; MECHANICAL BEHAVIOR; NUMERICAL PARAMETERS; TEXTURE INTENSITY;

DEEP DRAWING;

EID: 23344451835     PISSN: 09977538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.euromechsol.2005.04.007     Document Type: Article

References (52)

1. L. Anand, S. Balasubramanian, and M. Kothari Constitutive modelling of polycrystalline metals at large strains: application to deformation processing, large plastic deformation of crystalline aggregates CISM Courses and Lectures vol. 376 1997 Springer 109 172
2. Andersson, A., Ohlsson, C.A., Mattiasson, K., Persson, B., 1999. Implementation and evaluation of the Karafillis-Boyce material model for anisotropic metal sheets. In: Gélin, J.C., Picart, P. (Eds.), Proc. 4th Int. Conf. NUMISHEET 99, Besançon, pp. 115-121
3. F. Barlat, and J. Lian Plastic behaviour and stretchability of sheet metals. Part 1: a yield function for orthotropic sheets under plane stress conditions Int. J. Plasticity 5 1 1989 51 66
4. A.J. Beaudoin, P.R. Dawson, K.K. Mathur, U.F. Kocks, and D.A. Korzekwa Application of polycrystal plasticity to sheet forming Comput. Methods Appl. Mech. Engrg. 117 1994 49 70
5. Béringhier, M., Delannay, L., Chastel, Y., Logé, R.E., 2004. Finite element modeling of a compression test with polycrystalline plasticity applied to reduced grain samplings. In: Stören S. (Ed.), Proc. 7th Int. Conf.: ESAFORM, Trondheim, pp. 167-170
6. S. Casotto, F. Pascon, A.M. Habraken, and S. Bruschi Thermo-mechanical- metallurgical model to predict geometrical distortions of rings during cooling phase after ring rolling operations Int. J. Machine Tools & Manufacture 45 2005 657 664
7. S. Castagne, F. Pascon, G. Bles, and A.M. Habraken Developments in finite element simulations of continuous casting J. Phys. IV 2004 447 455
8. S. Castagne, M. Remy, and A.M. Habraken Development of a mesoscopic cell modeling the damage process in steel at elevated temperature Engineering Materials 2003 Trans Tech Publications Switzerland 223 236 145-150
9. S. Cescotto, and R. Charlier Frictional contact finite element based on mixed variational principles Int. J. Numer. Methods Engrg. 36 1993 1681 1701
10. K. Chung, S.Y. Lee, F. Barlat, Y.T. Keum, and J.M. Park Finite element simulation of sheet forming based on a planar anisotropic strain-rate potential Int. J. Plasticity 12 1 1996 93 115
11. P.R. Dawson, and A. Kumar Deformation process simulations using polycrystal plasticity, large plastic deformation of crystalline aggregates ICMS Courses and Lectures vol. 376 1997 Springer 247
12. P.R. Dawson, S.R. MacEwen, and P.-D. Wu Advances in sheet metal forming analyses: dealing with mechanical anisotropy from crystallographic texture Int. Mater. Rev. 48 2 2003 86 122
13. Delannay, L., Béringhier, M., Chastel, Y., Logé, R.E., 2005. Simulation of cup-drawing based on crystal plasticity applied to reduced grain samplings. In: Proc. 14th Int. Conf.: ICOTOM, Leuven, in press
14. M. Drean, A.M. Habraken, A. Bouchair, and J.P. Muzeau Swaged bolts: modelling of the installation process and numerical analysis of the mechanical behaviour Comput. & Structures 80 2002 2361 2373
15. Duchêne, L., 2003. FEM study of metal sheets with a texture based, local description of the yield locus. PhD Thesis. University of Liège, Liège
16. Duchêne, L., de Montleau, P., Bouvier, S., Habraken, A.M., 2004. Deep drawing simulations with different polycrystalline models. In: Ghosh, S. (Ed.), Proc. 8th Int. Conf.: NUMIFORM, Columbus, pp. 1022-1027
17. L. Duchêne, A. Godinas, S. Cescotto, and A.M. Habraken Texture evolution during deep-drawing processes J. Mater. Processing Technology 2002 125 126 110-118
18. L. Duchêne, A. Godinas, S. Cescotto, and A.M. Habraken Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process J. Phys. IV (France) 105 2003 223 230
19. Duchêne, L., Habraken, A.M., Godinas, A., 2000. Validation of a FEM model coupled with texture applied to deep drawing process. In: Fritz, H.G. (Ed.), Proc. 3rd Int. Conf.: ESAFORM'00, Stuttgart
20. Frénois, S., 2001. Modélisation polycristalline du comportement mécanique du tantale. Application à la mise en forme par hydroformage. PhD Thesis, Ecole Centrale des Arts et Manufactures, Ecole Centrale Paris
21. L. Geng, and R.H. Wagoner Role of plastic anisotropy and its evolution on springback Int. J. Mech. Sci. 44 1 2002 123 148
22. A.M. Habraken Modelling the plastic anisotropy of metals Arch. Comput. Meth. Engrg. 11 1 2004 3 96
23. A.M. Habraken, and M. Bourdouxhe Coupled thermo-mechanical-metallurgical analysis during the cooling of steel pieces Eur. J. Mech. A Solids 11 3 1992 381 402
24. A.M. Habraken, and S. Cescotto An automatic remeshing technique for finite element simulation of forging processes Int. J. Numer. Methods Engrg. 30 1990 1503 1525
25. A.M. Habraken, and S. Cescotto Contact between deformable solids, the fully coupled approach Math. Computer Modelling 28 4-8 1998 153 169
26. A.M. Habraken, J.F. Charles, J. Wegria, and S. Cescotto Dynamic recrystallization during zinc rolling Int. J. Forming Processes 1 1 1998
27. A.M. Habraken, and L. Duchêne Anisotropic elasto-plastic finite element analysis using a stress-strain interpolation method based on a polycrystalline model Int. J. Plasticity 20 8-9 2004 1525 1560
28. R. Hill A theory of the yielding and plastic flow of anisotropic metals Proc. Roy. Soc. London Ser. A 193 1948 281 297
29. S.R. Kalidindi, and L. Anand Macroscopic shape change and evolution of crystallographic texture in pre-textured fcc metals J. Mech. Phys. Solids 42/3 1994 459 490
30. A.P. Karafillis, and M.C. Boyce A general anisotropic yield criterion using bounds and a transformation weighting tensor J. Mech. Phys. Solids 41 12 1993 1859 1886
31. S.W. Lee, J.W. Yoon, and D.Y. Yang A stress integration algorithm for plane stress elastoplasticity and its applications to explicit finite element analysis of sheet metal forming processes Comput. & Structures 66 2-3 1998 301 311
32. L.P. Lei, S.M. Hwang, and B.S. Kang Finite element analysis and design in stainless steel sheet forming and its experimental comparison J. Mater. Processing Technology 110 1 2001 70 77
33. Li, K.P., Cescotto, S., Jetteur, P., 1992. An element with hourglass control for the large deformation analysis in three-dimension. In: Owen, D.R.J. (Ed.), Proc. of 3rd Int. Conf. on Computational Plasticity, Fundamentals and Applications, Barcelona
34. K.P. Li, A.M. Habraken, and H. Bruneel Simulation of square-cup deep-drawing with different finite elements J. Mater. Processing Technology 50 1995 81 91
35. S. Li, I.J. Beyerlein, D.J. Alexander, and S.C. Vogel Texture evolution during multi-pass equal channel angular extrusion of copper: neutron diffraction characterization and polycrystal modeling Acta Mater. 53 2005 2111 2125
36. S. Li, E. Hoferlin, A. Van Bael, and P. Van Houtte Application of a texture-based plastic potential in earing prediction of an IF steel Adv. Engrg. Mater. 3 12 2001 990 994
37. S. Li, E. Hoferlin, A. Van Bael, P. Van Houtte, and C. Teodosiu Finite element modelling of plastic anisotropy induced by texture and strain-path change Int. J. Plasticity 19 5 2003 647 674
38. R. Mendoza, M. Alanis, J. Huante, C. Gonzalez-Rivera, and J.A. Juarez-Islas Evaluation of the mechanical properties and corrosion behaviour of ultra-clean steels J. Mater. Processing Technology 101 2000 238 244
39. P. Mosbah, S. Shima, A.M. Habraken, and R. Charlier Numerical simulation of compacting process of a multi-steeped part with comparisons to experiments J. Japan Soc. Powder and Powder Metallurgy 46 1999 696 704
40. Munhoven, S., Habraken, A.M., Van Bael, A., Winters, J., 1996. Anisotropic finite element analysis based on texture. In: Lee, J.K., Kinzel, G.L., Wagoner, R.H. (Eds.), Proc. 3rd Int. Conf.: NUMISHEET 96, Deaborn, pp. 112-119
41. Munhoven, S., Habraken, A.M., Winters, J., Schouwenaars, R., Van Houtte, P., 1995. Application of an anisotropic yield locus based on texture to a deep drawing simulation. In: Shen, S.F., Dawson, P.R. (Eds.), Proc. 5th Int. Conf. on Numerical Methods in Industrial Forming Processes: NUMIFORM 95, Ithaca, pp. 767-772
42. Pijlman, H.H., Brinkman, J., Huetink, J., Vegter, H., 1999. The Vegter yield criterion based on multi-axial measurements. In: Gélin, J.C., Picart, P. (Eds.), Proc. 4th Int. Conf. NUMISHEET 99, Besançon, pp. 109-114
43. D. Raabe Challenges in computational materials science Adv. Mater. 14 9 2002 639 650
44. J.C. Simo, and T.J.R. Hughes On the variational foundations of assumed strain methods J. Appl. Mech. 53 1986 51 54
45. L.S. Toth, and P. Van Houtte Discretization techniques for orientation distribution function Textures and Microstructures 19 1992 229 244
46. Z. Tourki, A. Zeghloul, and G. Ferron Sheet metal forming simulations using a new model for orthotropic plasticity Comput. Mater. Sci. 5 1996 255 262
47. Van Houtte, P., 2002. ODFLAM Software, Part of the latest version of MTM-FHM Software System. Katholieke Universiteit Leuven
48. Vegter, H., An, Y., Pijlman, H.H., Huetink, J., 1999. Advanced material testing on aluminium alloys and low carbon steels for sheet forming. In: Gélin, J.C., Picart, P. (Eds.), Proc. 4th Int. Conf. NUMISHEET 99, Besançon, pp. 3-8
49. Winters, J., 1996. Implementation of texture-based yield locus into an elastoplastic finite element code. PhD Thesis, Katholieke Universiteit Leuven, Leuven
50. Y.Y. Zhu, and S. Cescotto Transient thermal and thermomechanical analysis by FEM Comput. & Structures 53 2 1994 275 304
51. Y.Y. Zhu, and S. Cescotto Unified and mixed formulation of the 4-node quadrilateral elements by assumed strain method: application to thermomechanical problems Int. J. Numer. Methods Engrg. 38 1995 685 716
52. Y.Y. Zhu, and S. Cescotto A fully coupled elasto-visco-plastic damage theory for anisotropic materials Int. J. Solids Structures 32 11 1995 1607 1641