Machine tool chatter and surface quality in milling processes

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 15, Issue , 2004, Pages 971-983

  Insperger, Tamás ^a   Stépán, Gábor ^a   Gradišek, Janez ^b   Weinert, Klaus ^c   Kalveram, Martin ^c   Govekar, Edvard ^b  

^a BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS   (Hungary)

^b UNIVERSITY OF LJUBLJANA   (Slovenia)

^c TU DORTMUND UNIVERSITY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

CHATTER MOTION; MACHINE TOOL CHATTER; PERIODIC MOTION; SURFACE QUALITY;

DEGREES OF FREEDOM (MECHANICS); DIFFERENTIAL EQUATIONS; EQUATIONS OF MOTION; ERROR ANALYSIS; MACHINE TOOLS; SURFACE PHENOMENA;

MILLING (MACHINING);

EID: 23244434511     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2004-59692     Document Type: Conference Paper

References (38)

1. Tlusty, J., Polacek, A., Danek, C., Spacek, J., 1962, Selbsterregte Schwingungen an Werkzeugmaschinen, VEB Verlag Technik, Berlin.
2. Tobias, S. A., 1965, Machine Tool Vibration, Blackie, London.
3. Stépán, G., 1989, Retarded Dynamical Systems, Longman, Harlow.
4. Smith, S., Tlusty, J., 1991, An overview of modeling and simulation of the milling process, Journal of Engineering for Industry 113, 169-175.
5. Li, H., Li, X., 2000, Modelling and simulation of chatter in milling using a predictive force model, International Journal of Machine Tools and Manufacture 40, 2047-2071.
6. Zhao, M. X., Balachandran, B., 2001, Dynamics and stability of milling process, International Journal of Solids and Structures 38(10-13), 2233-2248.
7. Peigné, G., Paris H., Brissaud D., 2003, A model of milled surface generation for time domain simulation of high speed cutting, Proceedings of the Institution of Mechanical Engineers Part B - Journal Of Engineering Manufacture, 217(7), 919-930.
8. Campomanes, M. L., Altintas, Y., 2003, An improved time domain simulation for dynamic milling at small radial immersions, Journal of Manufacturing Science and Engineering 125(3), 416-422.
9. Altintas, Y., Budak, E., 1995, Analytical prediction of stability lobes in milling, Annals of the CIRP, 44(1), 357-362.
10. Kim, S. K., Lee, S.-Y., 2001, Chatter prediction of end milling in a vertical machining center, Journal of Sound and Vibration 241(4), 567-586.
11. Tian, J., Hutton, S. G., 2001, Chatter instability in milling systems with flexible rotating spindles - a new theoretical approach, Journal of Manufacturing Science and Engineering, 123(1), 1-9.
12. Davies, M. A., Pratt, J. R., Dutterer, B., Burns, T. J., 2002, Stability prediction for low radial immersion milling, Journal of Manufacturing Science and Engineering 124(2), 217-225.
13. Bayly, P. V., Halley, J. E., Mann, B. P., Davies, M. A., 2003, Stability of interrupted cutting by temporal finite element analysis, Journal of Manufacturing Science and Engineering 125(2), 220-225.
14. Faassen, R. P. H., van de Wouw, N., Oosterling, J. A. J., Nijmeijer, H., 2003, Prediction of regenerative chatter by modeling and analysis of high-speed milling, International Journal of Machine Tools and Manufacture, 43(14), 1437-1446.
15. Insperger, T., Mann, B. P., Stépán, G., Bayley, P. V., 2003, Stability of up-milling and down-milling. Part 1 : Alternative analytical methods. International Journal of Machine Tools and Manufacture 43(1), 25-34.
16. Mann, B. P., Insperger, T., Bayly, P. V., Stépán, G., 2003, Stability of up-milling and down-milling, Part 2: Experimental verification, International Journal of Machine Tools and Manufacture 43(1), 35-40.
17. Mann, B. P., Young, K. A., Schmitz, T. L., Bartow. M. J., Bayly, P. V., 2003, Machining accuracy due to tool and workpiece vibrations, in Proceedings of the 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, DC, paper no. IMECE2003-41991 (CD-ROM).
18. Szalai, R., Stépán, G., 2003, Stability boundaries of high-speed milling corresponding to period doubling are essentially closed curves, Proceedings of ASME International Mechanical Engineering Conference and Exposition, Washington D.C., USA, paper no. IMECE2003-42122 (CD-ROM).
19. Wang, J.-J. J., Zheng, C. M., Huang, C. Y., 2003, The effect of harmonic force components on regenerative stability in end milling, in Proceedings of the 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, DC, paper no. IMECE2003-42367 (CD-ROM).
20. Corpus, W. T., Endres, W. J., 2004, Added stability lobes in machining processes that exhibit periodic time variation - Part 1 : An analytical solution, Journal of Manufacturing Science and Engineering, in press.
21. Corpus, W. T., Endres, W. J., 2004, Added stability lobes in machining processes that exhibit periodic time variation Part 2: Experimental validation, Journal of Manufacturing Science and Engineering, in press.
22. Insperger, T., Stépán, G., Bayly, P. V., Mann, B. P., 2003, Multiple chatter frequencies in milling processes. Journal of Sound and Vibration, 262(2), 333-345.
23. Gradišek, J., Friedrich, R., Govekar, E., Grabec, I., 2002, Analysis of data from periodically forced stochastic processes, Physics Letters A 294(3-4), 234-238.
24. Kivanc, E. B., Budak, E., 2003, Development of analytical endmill deflection and dynamic models, in Proceedings of the 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, DC, paper no. IMECE2003-42301 (CD-ROM).
25. Schmitz, T. L., Davies, M. A., Kennedy, M. D., 2001, Tool point frequency response prediction for high-speed machining by RCSA, Journal of Manufacturing Science and Engineering 123(4), 700-707.
26. Esterling, D., Caulfield, F. D., Kiefer, A., Buckner, G., Jaju, P., 2003, Non-contact device for measuring frequency response functions of CNC machine tools, in Proceedings of the 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, DC, paper no. IMECE2003-42264 (CD-ROM).
27. Young, K. A., Helvey, A. M., 2003, Requirements for consistent and productive performance in high speed milling. in Proceedings of the 2003 ASME International Mechanical Engineering Congress and Exposition, Washington, DC, paper no. IMECE2003-41694 (CD-ROM).
28. Montgomery, D., Altintas, Y., 1991, Mechanism of cutting force and surface generation in dynamic milling. Journal of Manufacturing Science and Engineering 113, 160-168.
29. Shirase, K., Altintas. Y., 1996. Cutting force and dimensional surface error generation in peripheral milling with variable pitch helical end mills, Internationaljournal of Machine Tools and Manufacture, 36(5), 567-584.
30. Schmitz, T., and Ziegert, J., 1999, Examination of surface location error due to phasing of cutter vibrations. Precision Engineering, 23, 51-62.
31. Xu, A.-P.,Qu,Y.-X., Zhang, D.-W., Huang, T., 2003, Simulation and experimental investigation of the end milling process considering the cutter flexibility. International Journal of Machine Tools and Manufacture 43, 283-292.
32. Mann, B. P., Bayly, P. V., Davies, M. A., Halley, J. E., 2004. Limit cycles, bifurcations, and accuracy of the milling process, Journal of Sound and Vibration, in press.
33. Stépán, G., Szalai, R., Mann, B., Bayly, P., Insperger, T., Gradišek, J., Govekar, E., 2003, Global attractors of high-speed milling - analysis, numerics and experiments, in Proceedings of the 2003 ASME Design Engineering Technical Conferences, Chicago, Illinois, paper no. DETC03/VIB-48572 (CD-ROM).
34. Lazoglu, I., Liang, S. Y., 2000, Modelling of ball-end milling forces with cutter axis inclination, Journal of Manufacturing Science and Engineering 122(1), 3-11.
35. Insperger. T., Stápán, G., 2002, Semi-discretization method for delayed systems, International Journal for Numerical Methods in Engineering 55(5), 503-518.
36. Insperger, T., Stépán, G., 2004, Updated semidiscretization method for periodic delay-differential equations with discrete delay, International Journal of Numerical Methods in Engineering, in press.
37. Gradišek, J., Kalveram, M., Weinert. K., 2004, Mechanistic identification of specific force coefficients for a general end mill, International Journal of Machine Tools and Manufacture, 44(4), 401-414.
38. Gradišek, J., Kalveram, M., Insperger. T., Weinert, K., Stépán, G., Govekar, E., Grabec, L, 2004, On stability prediction for milling, International Journal of Machine Tools and Manufacture, submitted.