Comparative analysis of the mechanisms and kinetics of mechanical alloying in the systems Fe(75)X(25) (X = Si, C)

Physics of Metals and Metallography

Volumn 93, Issue 3, 2002, Pages 278-288

  Elsukov, E P ^a   Dorofeev, G A ^a   Konygin, G N ^a   Fomin, V M ^a   Zagainov, A V ^a  

^a PHYSICOTECHNICAL INSTITUTE   (Russian Federation)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; MECHANICAL ALLOYING; SILICON; X RAY DIFFRACTION ANALYSIS;

ATOMIC MIXING; ATOMIC PROPORTION; SOLID-STATE REACTIONS;

IRON;

EID: 23044534287     PISSN: 0031918X     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (43)

1. Yelsukov, E.P., Dorofeev, G.A., Barinov, V.A., et al., Solid State Reactions in the Fe-Sn System under Mechanical Alloying and Grinding, Mater. Sci. Forum, 1998, vols. 269-272, pp. 151-156.
2. Dorofeev, G.A., Konygin, G.N., Yelsukov, E.P., et al., Structural Evolution in Mechanically Alloyed Fe-Sn, in Mössbauer Spectroscopy in Materials Science, Miglierini, M. and Petridis, D., Eds., 1999, pp. 151-160.
3. Dorofeev, G.A., Yelsukov, E.P., Ulyanov, A.L., and Konygin, G.N., Thermodynamic Simulation of Mechanically Alloyed Solid Solution Formation in Fe-Sn System, Mater. Sci. Forum, 2000, vols. 343-346, pp. 585-590.
4. Dorofeev, G.A., Ul'yanov, A.L., Konygin, G.N., and Elsukov, E.P., A Comparative Analysis of the Mechanisms, Thermodynamics, and Kinetics of the Mechanical Alloying in Fe(68) M(32) (M = Si, Sn) Systems, Phys. Met. Metallogr., 2001, vol. 91, no. 1, pp. 44-52.
5. Nadutov, V.M., Garamus, V.M., and Rawers, J.C., Mössbauer and SANS Study of Fe-Powder Mechanically Alloyed with Carbon, Mater. Sci. Forum, 2000, vols. 343-346, pp. 721-725.
6. Le Caër, G., Matteazzi, P., Bauer-Grosse, E., et al., Mössbauer Study of Mechanical Alloying in Fe-V and Fe-C Alloys, Colloq. Phys. C4, 1990, vol. 51, pp. C4-151-C4-155.
7. Le Caër, G., Bauer-Grosse, E., Pianelli, A., et al., Mechanically Driven Syntheses of Carbides and Silicides, J. Mater. Sci., 1990, vol. 25, pp. 4726-4731.
8. 3C by Mechanical Alloying Method, Mater. Sci. Forum, 1997, vols. 235-238, pp. 127-132.
9. Wang, G.M., Calka, A., Campbell, S.J., and Kaczmarek, W.A., Carburization of Iron by Ball-Milling Fe50-C50, Mater. Sci. Forum, 1995, vols. 179-181, pp. 201-206.
10. 3, Mater. Sci. Eng. A, 1997, vols. 226-228, pp. 75-79.
11. Miani, F., Matteazzi, P., and Basset, D., Modeling the Kinetics of Mechanosynthesis of Iron Carbides, Proc. First Int. Conf. on Mechanochemistry, InCoMe'93, Kosice, March 23-26, 1993, Cambridge: Interscience, 1994, pp. 102-105.
12. Wang, G.M., Campbell, S.J., Calka, A., and Kaczmarek, W.A., Ball-Milling of Fe-C (20-75% Fe), Nanostruct. Mater., 1995, vol. 6, pp. 389-392.
13. Nasu, T., Nagoaka, K., Itoh, N., and Suzuki, K., Solid State Amorphization of Fe-C Alloy by Mechanical Alloying, J. Non-Ciyst. Solids, 1990, vol. 122, pp. 216-218.
14. Ogasawara, T., Inoue, A., and Masumoto, T., Amorphization in Fe-Metalloid System by Mechanical Alloying, Mater. Sci. Eng., A, 1991, vol. 134, pp. 1338-1341.
15. Nasu, T., Koch, C.C., Nagoaka, K., et al., EXAFS Study of the Solid State Amorphization Process in an Fe-C Alloy, Mater. Sci. Eng., A, 1991, vol. 134, pp. 1385-1388.
16. Ogasawara, T., Inoue, A., and Masumoto, T., Preparation of Fe-C-B Powders by Mechanical Alloying and Heat-Resistant Hardness of Their Hot-Pressed Products, Mater. Sci. Forum, 1992, vols. 88-90, pp. 423-430.
17. Omuro, K. and Miura, H., Chemical Effect of Ternary Additions on Amorphization in Fe-C Systems by Mechanical Alloying, Appl. Phys. Lett., 1994, vol. 64, pp. 2961-2963.
18. Omuro, K. and Miura, H., Amorphization of Mechanically Alloyed Fe-C and Fe-N Materials with Additive Elements and Their Concentration Dependence, Mater. Sci. Forum, 1995, vols. 179-181, pp. 273-278.
19. Miura, H., Omuro, K., and Ogawa, H., Effect of the Concentration of Carbon or Additives on Amorphization on Fe-C Materials by Mechanical Alloying, Mater. Trans., JIM, 1995, vol. 36, no. 2, pp. 263-268.
20. 3X Alloys (X=Al, As, Ge, In, Sb, Si, Sn, Zn) Prepared by Mechanical Alloying, J. Appl. Phys., 1994, vol. 76, pp. 5961-5966.
21. Gaffet, E., Malhouroux, N., and Abdellaoui, M., Far from Equilibrium Phase Transition Induced by Solid-State Reaction in the Fe-Si System, J. Alloys Compd., 1993, vol. 194, pp. 339-360.
22. Abdellaoui, M., Barradi, T., and Gaffet, E., Mechanism of Mechanical Alloying Phase Formation and Related Magnetic and Mechanical Properties in the Fe-Si System, J. Alloys Compd., 1993, vol. 198, pp. 155-164.
23. Abdellaoui, M., Gaffet, E., and Djega-Mariadassou, C., Mössbauer Effect Study of Disordering Induced by Mechanical Alloying in the Fe-Si System, Mater. Sci. Forum, 1995, vols. 179-181, pp. 109-114.
24. Števulova, N., Buchal, A., Petrovič, P., Tkačova, K., and Šepelak, V., Structural Investigation of the High-Energy Milled Fe-Si System J. Magn. Magn. Mater., 1999, vol. 203, pp. 190-192.
25. Števulova, N., Buchal, A., Žak, T., et al., Structure and Magnetic Properties of Mechanically Alloyed Fe-Si System, Acta Phys. Slovaka, 1999, vol. 49, pp. 429-432.
26. x (M = Si, Ge, Sn). A Comparative Study, Mater. Sci. Forum, 1999, vols. 312-314, pp. 85-90.
27. Elsukov, E.P., Barinov, V.A., and Konygin, G.N., Effect of the Order-Disorder Transition on the Structural and Magnetic Properties of BCC Iron-Silicon Alloys, Fiz. Met. Metalloved., 1986, vol. 62, no. 4, pp. 719-723.
28. Yelsukov, E.P., Konygin, G.N., Barinov, V.A., and Voronina, E.V., Local Atomic Environment Parameters and Magnetic Properties of Disordered Crystalline and Amorphous Iron-Silicon Alloys, J. Phys.: Condens. Matter, 1992, vol. 4, pp. 7597-7606.
29. Fomin, V.M., Voronina, E.V., Yelsukov, E.P., and Deev, A.N., The Local Atomic Structure of Nanocrystalline Mechanically Ground Fe-Si Alloys, Mater. Sci. Forum, 1998, vols. 269-272, pp. 437-442.
30. Voronina, E.V., Ershov, N.V., Ageev, A.L., and Babanov, Yu.A., Regular Algorithm for the Solution of the Inverse Problem in Mössbauer Spectroscopy, Phys. Status Solidi B, 1990, vol. 160, pp. 625-634.
31. Elsukov, E.P., Barinov, V.A., and Konygin, G.N., Structural and Magnetic Parameters of Ordered Fe-Si Alloys, Metallofizika, 1989, vol. 11, no. 4, pp. 52-55.
32. x Films for 0.19 ≤ x ≤ 0.49, Philos. Mag. B, 1987, vol. 56, pp. 485-500.
33. 2, Phys. Status Solidi, 1967, vol. 22, pp. 473-481.
34. Maksimov, Yu.V., Suzdalev, I.P., and Arents, R.A., Study of Magnetic Properties of χ and θ Carbides by Mössbauer Spectroscopy, Fiz. Tverd. Tela (Leningrad), 1972, vol. 14, pp. 3344-3347.
35. Elsukov, E.P., Dorofeev, G.A., Ul'yanov, A.I., Zagainov, A.V., and Maratkanova, A.N., Mössbauer Spectroscopy and Magnetic Studies of Nanocrystalline Iron Produced by Milling in an Argon Atmosphere, Phys. Met. Metallogr., 2001, vol. 91, no. 3, pp. 258-265.
36. Treudeau, M.L. and Schulz, R., High Resolution Electron Microscopy Study of Ni-Mo Nanocrystals Prepared by High-Energy Mechanical Alloying, Mater. Sci. Eng., A, 1991, vol. 134, pp. 1361-1367.
37. Physical Metallurgy, Cahn, R.W. and Haasen, P., Eds., New York: North-Holland Physics, 1983;
38. translated under the title Fizicheskoe metallovedenie, Moscow: Metallurgiya, 1987.
39. Horita, Z., Smith, D.J., Furukawa, M., et al., Evolution of Grain Boundary Structure in Submicrometer-Grained Al-Mg Alloy, Mater. Characteriz., 1996, vol. 37, pp. 285-294.
40. Elsukov, E.P., Lomaeva, S.F., Konygin, G.N., et al., Effect of Carbon on the Magnetic Properties of Nanocrystalline Iron Prepared by Mechanical Milling in Heptane, Phys. Met. Metallogr., 1999, vol. 87, no. 2, pp. 114-119.
41. Mogutnov, B.M., Tomilin, I.A., and Shvartsman, L.A., Termodinamika splavov zheleza (Thermodynamics of Iron Alloys), Moscow: Metallurgiya, 1984.
42. Gertsriken, D.S., Mazanko, V.F., and Fal'chenko, V.M., Impul'snaya obrabotka i massoperenos v metallakh pri nizkikh temperaturakh (Pulsed Treatment and Mass Transfer in Metals at Low Temperatures), Kiev: Naukova Dumka, 1991.
43. Butyagin, P.Yu., Mechanical Disordering and Reactivity of Solids, Chem. Rev. B, 1998, vol. 23, part 2, pp. 89-165.