Polystyrene-grafted carbon fibers: Surface properties and adhesion to polystyrene

Journal of Thermoplastic Composite Materials

Volumn 18, Issue 4, 2005, Pages 307-331

  Bismarck, Alexander ^a   Pfaffernoschke, Matthias ^b   Springer, Jürgen ^b   Schulz, Eckhard ^c  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

^b TECHNISCHE UNIVERSITÄT BERLIN   (Germany)

^c Laboratorium VI21   (Germany)

Author keywords

potential; Adhesion; Carbon fiber; Contact angle; Grafting; Polystyrene; Single fiber pull out test

Indexed keywords

ADHESION; COMPOSITE MATERIALS; CONTACT ANGLE; FRACTURE; FREE RADICAL POLYMERIZATION; GRAFTING (CHEMICAL); HYDROPHOBICITY; POLYSTYRENES; SCANNING ELECTRON MICROSCOPY; SHEAR STRENGTH; SURFACE PROPERTIES; THERMOPLASTICS;

Ζ-POTENTIAL; GRAFTING; SINGLE-FIBER PULL-OUT TEST; THERMOPLASTIC MATRICES;

CARBON FIBERS;

EID: 22944441298     PISSN: 08927057     EISSN: None     Source Type: Journal    
DOI: 10.1177/0892705705049559     Document Type: Article

References (46)

1. Peng, J.C.M., Donnet, J.-B. and Rebouillat, S. (1998). Surface Treatment of Carbon Fibers, In: Donnet, J.-B., Wang, T.K., Rebouillat, S. and Peng, J.C.M. (eds), Carbon Fibers, 3rd edn, Marcel Dekker, New York.
2. Kim, J.-K. and Mai, Y.-W. (1998). Surface Treatments of Fibers and Effects on Composite Properties, In: Engineered Interfaces in Fiber Reinforced Composites, Elsevier, Amsterdam.
3. Luo, S. and van Ooij, W.J. (2002). Surface Modification of Textile Fibers for Improvement of Adhesion to Polymeric Matrices: A Review, J. Adhesion Sci. Technol., 16: 1715.
4. Le Bonheur, V. and Stupp, S.I. (1994). Coupling Carbon Fibers to Epoxy Matrices with Grafted Side-Chain Liquid-Crystal Polymers, Chem. Mater., 6: 1880.
5. Jacobasch, H.-J., Freitag, K.-H., Panzer, U. and Grundke, K. (1991). Charakterisierung und Modifizierung der Oberflächeneigenschaften von Fasern für Verbundwerkstoffe, Chemiefasern/Textilindustrie, 93: 39.
6. Raghavendran, V.K., and Drzal, L.T. (2002). Fiber-matrix Interfacial Adhesion Improvement in Carbon Fiber-Bisphenol-A Polycarbonate Composites by Polymer Grafting, J. Adhesion, 78: 895.
7. Drzal, L.T. and Raghavendran, V.K. (2003). Adhesion of Thermoplastic Matrices to Carbon Fibers: Effect of Polymer Molecular Weight and Fiber Surface Chemistry, J. Thermoplast. Composite Mater., 16: 21.
8. Subramanian, R.V. and Crasto, A.S. (1986). Electrodeposition of a Polymer Interphase in Carbon-Fiber Composites, Polym. Composites, 7: 201.
9. Subramanian, R.V. (1980). Electrochemical Polymerization and Deposition on Carbon Fibers, Pure Appl. Chem., 52: 1929.
10. Iroh, J.O. and Jordan, K.M.S. (2000). Mechanical Properties of Carbon Fibre/PMR-15 Composites Containing Thermoplastic Polymide Interphase Coatings, Surf. Engin., 16: 303.
11. Crasto, A.S., Own, S.H. and Subramanian, R.V. (1988). The Influence of the Interphase on Composite Properties - Poly(Ethylene-co-Acrylic Acid) and Poly(Methyl Vinyl Ether-co-Maleic Anhydride) Electrodeposited on Graphite Fibers, Polym. Composites, 9: 78.
12. Li, Z.F. and Netravali, A.N. (1992). Surface Modification of UHSPE Fibers Through Allylamine Plasma Deposition: 2. Effect on Fiber and Fiber Epoxy Interface, J. Appl. Polym. Sci., 44: 333.
13. Waldman, D.A., Zou, Y.L. and Netravali, A.N. (1995). Ethylene Ammonia Plasma Polymer Deposition for Controlled Adhesion of Graphite Fibers to PEEK.: 1. Characterization of Plasma Formed Polymers, J. Adhesion Sci. Technol., 9: 1475.
14. Zou, Y.L. and Netravali, A.N. (1995). Ethylene Ammonia Plasma Polymer Deposition for Controlled Adhesion of Graphite Fibers to PEEK: 2. Effect on Fiber and Fiber/Matrix Interface, J. Adhesion Sci. Technol., 9: 1505.
15. Dilsiz, N., Erinç, N.K., Bayramli, E. and Akovali, G. (1995). Surface-Energy and Mechanical-Properties of Plasma-Modified Carbon-Fibers, Carbon, 33: 853.
16. Dilsiz, N. (2000). Plasma Surface Modification of Carbon Fibers: A Review, J. Adhesion Sci. Technol., 14: 2000.
17. Yamada, K., Yamane, H., Kumada, K., Tanabe, S. and Kajiyama, T. (2003). Plasma-graft Polymerization of a Monomer with Double Bonds onto the Surface of Carbon Fiber and its Adhesion to a Vinyl Ester Resin, J. Appl. Polym. Sci., 90: 2415.
18. Bismarck, A., Menner, A., Kumru, M.E., Saraç, A.S., Bistritz, M. and Schulz, E. (2002). Poly(carbazole-co-acrylamide) Electrocoated Carbon Fibers and their Adhesion Behavior to an Epoxy Resin Matrix, J. Mater. Sci., 37: 461.
19. Brie, M., Cazard, J., Lang, F.-M. and Riess, G. (1971). Greffage de poymères Ssur fibres de carbone, Bull. Inform. Sci. Techn. Commis. Energ. At., 155: 31.
20. Brié, M. and Le Dressas, C. (1973). Grafting of Polymers on Carbon Fibres (Greffage de poymeres sur fibres de carbone), Fibre Sci. Technol., 6: 47.
21. Koschinski, I. and Reichert, K.H. (1988). Preparation of Carbon-Fiber Reinforces Poly (Phenylene Sulfide) by In-Situ Polymerization, Makromol. Chem. Rapid, 9: 291.
22. Bhama, S. and Stupp, S.I. (1990). Grafting of a Liquid-Crystal Polymer on Carbon-Fibers, Polym. Engin. Sci., 30: 603.
23. Raghavendran, V.K. and Drzal, L.T. (2002). Grafting of Bisphenol-A Polycarbonate and Polymethyl Methacrylate on to the Surface of Carbon Fibers via Anionic Polymerization, Composite Interfaces, 9: 1.
24. Yan, W.X., Han, K.Q., Qin, L.L. and Yu, M.H. (2004). Study on Long Fiber-reinforced Thermoplastic Composites Prepared by In Situ Solid-state Polycondensation, Appl. Polym. Sci., 91: 3959.
25. Bismarck, A., Pfaffernoschke, M. and Springer, J. (1999). Grafted Carbon Fibers and their Physico-chemical Properties; Part I: Grafting of Methacrylic Acid onto Carbon Fibers, J. Appl. Polym. Sci., 71: 1175.
26. Bismarck, A., Pfaffernoschke, M., Selimović, M. and Springer, J. (1998). Grafted Carbon Fibers and their Physico-chemical Properties. Part II. Grafting of Liquid Crystalline Methacrylic Monomers onto Carbon Fibers and the Influence of an Applied Voltage to the Carbon Fiber Embedded in a Liquid Crystalline Matrix, Colloid Polym. Sci., 276: 1110.
27. Bismarck, A., Pfaffernoschke, M., Song, B. and Springer, J. (1999). Grafted Carbon Fibers and their Physico-chemical Properties. Part II. Grafting of Liquid Crystalline Methacrylic Monomers onto Carbon Fibers and the Influence of an Applied Voltage to the Carbon Fiber Embedded in a Liquid Crystalline Matrix, J. Appl. Polym. Sci., 71: 1893.
28. Selimović, M., Bismarck, A., Pfaffernoschke, M. and Springer, J. (1999). Grafted Carbon Fibers and their Physico-chemical Properties; Part IV: Grafting of Cyano-Biphenyl Containing Liquid-Crystalline Monomers onto Modified Carbon Fibers, Acta Polymerica, 50: 156.
29. Donnet, J.B., Papirer, E. and Vidal, A. (1975). In: Walker, P.I. and Thrower, P.A. (eds), Chemistry and Physics of Carbon, Marcel Dekker, New York.
30. Collins, G.E. (1947). A Surface Tension Method for Measuring the Perimeters of Fibres and the Contact Angles of Liquids against Fibers, J. Textile Inst., 38: T73.
31. Jacobasch, H.-J., Simon, F., Werner, C. and Bellmann, C. (1996). Elektrokinetische Meßmethoden: Grundlagen und Anwendungen, Technisches Messen, 63: 447.
32. Mäder, E., Grundke, K.., Jacobasch, H.-J. and Wachinger, G. (1994). Surface, Interphase and Composite Property Relations in Fiber-reinforced Polymers, Composites, 25: 739.
33. Hampe, A. and Marotzke, C. (1992). Adhesion of Polymers to Reinforcing Fibers, Polym. Intern., 28: 313.
34. Meretz, S., Linke, T., Schulz, E., Hampe, A. and Hentschel, M. (1992). Diameter Measurement of Small Fibers - Laser Diffraction and Scanning Electron-Microscopy Techique Results do not Differ Systematically, J. Mater. Sci. Lett., 11: 1471.
35. Hampe, A., Kalinka, G., Meretz, S. and Schulz, E. (1995). An Advanced Equipment for Single-Fiber Pull-Out Test Designed to Monitor the Fracture Process, Composites, 26: 40.
36. Wu, S. (1982). Polymer Interface and Adhesion, Marcel Dekker, New York.
37. Jacobasch, H.-J. (1984). Oberflächenchemie faserbildender Polymerer, Akademie Verlag, Berlin.
38. van Wagenen, R.A., Coleman, D.L., King, R.N., Triolo, P., Brostrom, L., Smith, L.M., Gregonis, D.E. and Andrade, J.D. (1981). Streaming Potential Investigations - Polymer Thin-Films, J. Colloid Interface Sci., 84: 155.
39. Mattson, S.J. and Mark, Jr., H.B. (1971). Activated Carbon; Surface Chemistry and Adsorption from Solution, Marcel Dekker, New York.
40. Ribitisch, V. and Stana-Kleinschenk, K. (1997). Characterization of Textile Fiber Surfaces by Streaming Potential Measurements. Contribution at International Zetapotential Workshop, Graz.
41. Kuehn, N. (1985). Elektrokinetische Erscheinungen im Offsetdruck, In: Symposium Proceedings, Elektrokinetische Erscheinungen '85, Institut für Technologie der Polymere Dresden.
42. Bismarck, A., Kumru, M.E., Song, B., Springer, J., Moos, E. and Karger-Kocsis, J. (1999). Study on Surface- and Mechanical Fiber Characteristics and their Effect on the Adhesion Properties to a Polycarbonate Matrix Tuned by Anodic Carbon Fiber Oxidation, Composites A, 30: 1351.
43. Meretz, S., Auersch, W., Marotzke, C., Schulz, E. and Hampe, A. (1993). Investigation of Morphology-Dependent Fracture-Behavior with the Single-Fiber Pull-Out Test, Composites Sci. Technol., 48: 285.
44. Marotzke, C. and Qiao, L. (1997). Interfacial Crack Propagation Arising in Single-Fiber Pull-Out Tests, Composite Sci. Technol., 57: 965.
45. Pisanova, E., Zhandarov, S., Mäder, E., Ahmad, I. and Young, R.J. (2001). Three Techniques of Interfacial Bond Strength Estimation from Direct Observation of Crack Initiation and Propagation in Polymer-fibre Systems, Composites: Part A, 32: 435.
46. Subramanian, R.V., Jakubowski, J.J. and Williams, F.D. (1978). Interfacial Aspects of Polymer Coating by Electropolymerization, J. Adhesion, 9: 185.