The role of grain boundary regions in the localized corrosion of a copper-free 6111-like aluminum alloy

Corrosion

Volumn 61, Issue 6, 2005, Pages 534-547

  Shi, A ^a,b   Shaw, B A ^a   Sikora, E ^a  

^a The Pennsylvania State University   (United States)

^b ELI LILLY AND COMPANY   (United States)

Author keywords

Aluminum alloy; Energy dispersive x ray spectrometer profiling; Intergranular corrosion; Pitting; Scanning electron microscopy; Scanning transmission electron microscopy; Transmission electron microscopy

Indexed keywords

ALUMINUM ALLOYS; CORROSION; CRYSTALLOGRAPHY; HEAT TREATMENT; PRECIPITATION (CHEMICAL); SCANNING ELECTRON MICROSCOPY; X RAY ANALYSIS;

CHLORIDE CONCENTRATIONS; INTERGRANULAR CORROSION (IGC); SCANNING TRANSMISSION ELECTRON MICROSCOPE (STEM);

GRAIN BOUNDARIES;

ALUMINUM ALLOY; PITTING CORROSION; SCANNING ELECTRON MICROSCOPY;

EID: 22344456284     PISSN: 00109312     EISSN: None     Source Type: Journal    
DOI: 10.5006/1.3278189     Document Type: Article

References (59)

1. G.S. Frankel, J. Electrochem. Soc. 145 (1998): p. 2,186.
2. G.S. Frankel, "Localized Corrosion of Metals: A Review of the Rate-Controlling Factors in Initiation and Growth," in Passivity of Metals and Semiconductors VIII, eds. M.B. Ives, B.R. MacDougall, J.A. Bardwell, The Electrochemical Society Proc. Series, PV 99-42 (Pennington, NJ: The Electrochemical Society, 1999), p. 445.
3. J.R. Davis, ed., "Aluminum and Aluminum Alloys," in ASM Specialty Handbook (Materials Park, OH: ASM International, 1993), p. 582.
4. J.R. Davis, ed., "Corrosion of Aluminum and Aluminum Alloys" (Materials Park, OH: ASM International, 1999), p. 35.
5. D.G. Eskin, Mater. Sci. Forum 396-402 (2002): p. 917.
6. D.J. Chakrabarti, Y. Peng, D.E. Laughlin, Mater. Sci. Forum, 396-402 (2002): p. 857.
7. S.W. Nam, D.H. Lee, Met. Mater. 6 (2000): p. 13.
8. R. Jeniski, Jr., B. Thanaboonsombut, T.H. Sanders, Jr., Metall. Trans. A 27A (1996): p. 19.
9. L. Lodgaard, N. Ryum, Mater. Sci. Eng. A283 (2000): p. 144.
10. A. Shi, "Characterization of 6111-Like Aluminum Alloys Using Electrochemical Techniques and Electron Microscopy" (Ph.D. diss., The Pennsylvania State University, 2003).
11. M.J. Pryor, "The Influence of the Defect Structure of Aluminum Oxide Films on the Pitting of Aluminum in Chloride Solutions," Proc. U.R. Evans Int. Conf. Localized Corrosion (Houston, TX: NACE International, 1974), p. 2.
12. H.P. Godard, Mater. Perform. 21 (1981): p. 9.
13. M.C. Reboul, T.J. Warner, H. Mayer, B. Baroux, Corros. Rev. 15 (1997): p. 471.
14. C. Blanc, G. Mankowski, Corros. Sci. 40 (1998): p. 411.
15. F. Hunkeler, H. Bohni, Corrosion 37 (1981): p. 645.
16. W. Zhang, G.S. Frankel, Electrochem. Solid-State Lett. 3 (2000): p. 268.
17. W. Zhang, G.S. Frankel, Electrochim. Acta 48 (2003): p. 1,193.
18. J.R. Galvele, S.M. De Micheli, Corros. Sci. 10 (1970): p. 795.
19. H. Kaesche, "Pitting Corrosion of Aluminum, and Intergranular Corrosion of Aluminum Alloys," Proc. U.R. Evans Conf. Localized Corrosion (Houston, TX: NACE, 1974), p. 516.
20. E.H. Dix, Trans. AIME 137 (1940): p. 11.
21. R.G. Buchheit, J.P. Moran, G.E. Stoner, Corrosion 46 (1990): p. 610.
22. R.G. Buchheit, J.P. Moran, G.E. Stoner, Corrosion 50 (1994): p. 120.
23. T. Ramgopal, P.I. Gouma, G.S. Frankel, Corrosion 58 (2002): p. 687.
24. K. Yamaguchi, K. Tohma, "Effect of Zn Addition on Intergranular Corrosion Resistance of Al-Mg-Si-Cu Alloys," Proc. 6th Int. Conf. on Aluminum Alloys, eds. T. Sato, S. Kumai, T. Kobayashi, Y. Murakami (Toyohashi, Japan: The Japanese Institute of Light Metals, 1998), p. 1,657.
25. J.E. Hatch, ed., Aluminum: Properties and Physical Metallurgy (Materials Park, OH: ASM International, 1984), p. 262.
26. A. Bhattamishra, K. Lal, Z. Metallkd. 89 (1998): p. 793.
27. A. Shi, B. Shaw, E. Sikora, "TEM and Electrochemical Characterization of Two Cu-Containing Al-Mg-Si Alloys," in preparation.
28. G.B. Burger, A.K. Gupta, P.W. Jeffrey, D.J. Lloyd, Mater. Charact. 35 (1995): p. 23.
29. L. Zhuang, R. De Haan, J. Bottema, C.T.W. Lahaye, P. De Smet, Mater. Sci. Forum 331-337 (2000): p. 1,309.
30. A.P. Bond, G.F. Bolling, H.A. Domian, H. Biloni, J. Electrochem. Soc. 113 (1966): p. 773.
31. H. Bohni, H.H. Uhlig, J. Electrochem. Soc. 116 (1969): p. 906.
32. A. Legat, E. Govekar, "A Comparison of Spectra and Chaotic Analysis of Electrochemical Noise," in Electrochemical Noise for Corrosion Applications, ASTM STP 1277, eds. J.R. Kearns, J.R. Scully, P.R. Roberge, D.L. Reichert, J.L. Dawson (West Conshohocken, PA: ASTM International, 1996), p. 129.
33. J.A. Richardson, G.C. Wood, Corros. Sci. 10 (1970): p. 313.
34. J.R. Galvele, S.M. de DeMicheli, IIL. Muller, S.B. De Wexler, I.L. Alanis, "Critical Potentials for Localized Corrosion of Aluminum Alloys," Proc. U.R. Evans Int. Conf. Localized Corrosion (Houston, TX: NACE, 1974), p. 580.
35. M. Baumgärtner, H. Kaesche, Corros. Sci. 29 (1989): p. 363.
36. H. Kaesche, "Microtunneling During Selective Alloy Dissolution and During Pitting," in Advances in Localized Corrosion, eds. H.S. Isaacs, U. Bertocci, J. Kruger, S. Smialowska (Houston, TX: NACE, 1987), p. 153.
37. M. Baumgärtner, H. Kaesche, Werkst. Korros. 42 (1991): p. 158.
38. T. R. Beck, "Occurrence and Properties of Anodic Salt Films in Pitting Corrosion," in Advances in Localized Corrosion, eds. H.S. Isaacs, U. Bertocci, J. Kruger, S. Smialowska (Houston, TX: NACE, 1987), p. 85.
39. M. Baumgärtner, H. Kaesche, Corros. Sci. 31 (1990): p. 231.
40. M. Baumgärtner, H. Kaesche, "The Nature of Crevice Corrosion of Aluminum in Chloride Solutions," in Advances in Localized Corrosion, eds. H.S. Isaacs, U. Bertocci, J. Kruger, S. Smialowska (Houston, TX: NACE, 1987), p. 407.
41. G.A. Dibari, H.J. Read, Corrosion 27 (1971): p. 483.
42. K. Nisancioglu, H. Holtan, "Corrosion of Aluminum in Aqueous Chloride Media," 7th Scand. Corros. Cong. (Trondheim, 1975), p. 468.
43. K. Nisancioglu, H. Holtan, Corros. Sci. 18 (1978): p. 835.
44. C. Barbosa, J.M.A. Rebello, O. Acselrad, J. Dille, J.L. Delplancke, Z. Metallkd. 93 (2002): p. 208.
45. M.H. Jacobs, Philos. Mag. 26 (1972): p. 1.
46. G.A. Edwards, K. Stiller, G.L. Dunlop, Appl. Surf. Sci. 76/77 (1994): p. 219.
47. S.J. Andersen, Metall. Trans. A 26A (1995): p. 1,931.
48. T. Moons, P. Ratchev, P. De Smet, B. Verlinden, P. Van Houtte, Ser. Mater. 35 (1996): p. 939.
49. A.D. Rollett, Mater. Sci. Forum 396-402 (2002): p. 593.
50. T. Sourmail, T. Okuda, J.E. Taylor, Ser. Mater. 50 (2004): p. 1,271.
51. B.W. Kempshall, B.I. Prenitzer, L.A. Giannuzzi, Ser. Mater. 47 (2002): p. 447.
52. S. Mogck, B. Kooi, J. Hosson, Interface Sci. 12 (2002): p. 39.
53. L. Chang, E. Rabkin, B. Straumal, B. Baretzky, W. Gust, Acta Mater. 47 (1996): p. 4,041.
54. T.R. Anthony, Acta Metall. 18 (1970): p. 307.
55. K.T. Aust, J.H. Westbrooke, Met. Sci. 9 (1979).
56. P.E.J. Flewitt, R.K. Wild, Grain Boundaries: Their Microstructure and Chemistry (New York, NY: John Wiley & Sons, Ltd., 2001), pp. 35, 55, 186.
57. M. Yasuda, F. Weinberg, D. Tromans, J. Electrochem. Soc. 137 (1990): p. 3,708.
58. V. Guillaumin, G. Mankowski, Corrosion 56 (2000): p. 12.
59. V. Guillaumin, G. Mankowski, Corros. Sci. 42 (2000): p. 105.