Effects of an α-Al2O3 thin film on the oxidation behavior of a single-crystal Ni-based superalloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35, Issue 13, 2004, Pages 1055-1065

  Su, Y F ^a   Allard, L F ^b   Coffey, D W ^c   Lee, W Y ^a  

^a STEVENS INSTITUTE OF TECHNOLOGY   (United States)

^b OAK RIDGE NATIONAL LABORATORY   (United States)

^c OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOY SURFACES; BOND COATS; CASTING DEFECT; EQUIAXED GRAINS; LATERAL GRAIN GROWTH; NI-BASED SUPERALLOYS; OXIDATION BEHAVIORS; SPALLATION RESISTANCE; THERMALLY GROWN OXIDE; THICK COATINGS; TIME-SCALES; TRANSIENT OXIDATIONS;

ALUMINUM; CHEMICAL VAPOR DEPOSITION; COATINGS; GRAIN GROWTH; GROWTH KINETICS; MORPHOLOGY; SUPERALLOYS; TANTALUM; THERMAL BARRIER COATINGS;

INTERNAL OXIDATION;

EID: 22244487552     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-1008-5     Document Type: Article

References (39)

1. P.K. Wright and A.G. Evans: Curr. Opin. Solid State Mater. Sci., 1999, vol. 4, pp. 255-56.
2. A.G. Evans, D.R. Mumm, J.W. Hutchinson, G.H. Meier, and F.S. Pettit: Progr. Mater. Sci., 2001, vol. 46, pp. 505-53.
3. V.K. Tolpgy and D.R. Clark: in Elevated Temperature Coatings: Science and Technology IV, N.B. Dahotre, J.M. Hampikian, and J.E. Morral, eds., TMS, Warrendale, PA, 2001, pp. 93-108.
4. W.Y. Lee, D.P. Stinton, C.C. Berndt, F. Erdogan, Y.D. Lee, and Z. Mutasim: J. Am. Ceram. Soc., 1996, vol. 79, pp. 3003-12.
5. V.K. Tolpgy and D.R. Clarke: in Elevated Temperature Coatings: Science and Technology IV, N.B. Dahotre, J.M. Hampikian, and J.E. Morral, eds., TMS, Warrendale, PA 2001, pp. 93-108.
6. Y. Zang, W.Y. Lee, J.A. Haynes, I.G. Wright, B.A. Pint, K.M. Cooley, and P.K. Liaw: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 679-87.
7. Y. Zhang, J.A. Haynes, W.Y. Lee, I.G. Wright, B.A. Pint, K.M. Cooley, and P.K. Liaw: Metall. Mater. Trans. A., 2001, vol. 32A, pp. 1727-41.
8. W.Y. Lee, Y. Zhang, I.G. Wright, B.A. Pint, and P.K. Liaw: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 833-41.
9. J.A. Haynes, M.K. Ferber, W.D. Porter, and E.D. Rigney: Oxid. Met., 1999, vol. 52, pp. 31-76.
10. I.G. Wright, B.A. Pint, W.Y. Lee, K.B. Alexander, and K. Priifjner: in High Temperature Surface Engineering, Institute of Materials, London, 2000, pp. 95-113.
11. T.E. Strangman: U.S. Patent 4,880,614, 1990.
12. J.H. Sun, E. Chang, C.H. Chao, and M.J. Cheng: Oxid. Met., 1993, vol. 40, pp. 465-81.
13. B.A. Pint, I.G. Wright, W.Y. Lee, Y. Zhang, K. Priifjner, and K.B. Alexander: Mater. Sci. Eng. A, 1998, vol. A245, pp. 201-11.
14. B.A. Pint: Oxid. Met., 1996, vol. 45, pp. 1-37.
15. B.A. Pint, A.J. Garratt-Reed, and L.W. Hobbs: J. Am. Ceram. Soc., 1998, vol. 81, pp. 305-14.
16. V. Tolpygo: Oxid. Met., 1999, vol. 51, pp. 449-77.
17. L.M. He, Y.-F. Su, L.F. Allard, M.J. Lance, and W.Y. Lee: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1113-24.
18. Y.-F. Su, M. Torzilli, J.D. Meyer, W.Y. Lee, C. Rawn, M. Lance, and S. Ruppi: in Elevated Temperature Coatings: Science and Technology IV, N.B. Dahotre, J.M. Hampikian, and J.E. Morral, eds., TMS, Warrendale, PA, 2001, pp. 15-28.
19. G.Y. Kim, W.Y. Lee, J.A. Haynes, and T.R. Watkins: Metall. Mater. Trans. A, 2001, vol. 32, pp. 615-24.
20. Y.-F. Su, M.A. Torzilli, J.D. Meyer, C.J. Rawn, M.J. Lance, S. Ruppi, and W.Y. Lee: J. Am. Ceram. Soc., 2002, vol. 85, pp. 2089-96.
21. H. Hindam and D.P. White: Oxid. Met., 1983, vol. 18, pp. 245-84.
22. R. Prescott, D.F. Mitchell, and M.J. Graham: Corrosion, 1994, vol. 50, pp. 62-71.
23. K. Messaoudi, A.M. Huntz, and B. Lesage: Mater. Sci. Eng. A, 1998, vol. A247, pp. 248-62.
24. J. Balmain, M.K. Loudjani, and A.M. Huntz: Mater. Sci. Eng. A, 1997, vol. A224, pp. 87-100.
25. Y. Yoshi and W.D. Kingery: J. Chem. Phys., 1960, vol. 35, p. 905.
26. F.A. Golightly, F.H. Stott, and G.C. Wood: J. Electrochem. Soc., 1979, vol. 126, pp. 1035-42.
27. V.K. Tolpygo and D.R. Clarke: Mater. High Temp., 2000, vol. 17, pp. 59-70.
28. G.C. Rybicki and J.L. Smialek: Oxid. Met., 1989, vol. 31, pp. 275-304.
29. M.W. Brumm and H.J. Grabke: Corr. Sci., 1992, vol. 33, pp. 677-90.
30. D.R. Clarke: Phys. Status Solidi A, 1998, vol. 166, pp. 183-96.
31. D.P. Garriga, B.A. Shollock, D.S. McPhail, R.J. Chater, and J.F. Walker: Int. J. Inorg. Mater., 1999, vol. 1, pp. 325-36.
32. C.V. Thompson: Ann. Rev. Mater. Sci., 1990, vol. 20, pp. 245-68.
33. J.K. Doychak, T.E. Mitchell, and J.L. Smialek: Mater. Res. Soc. Symp. Proc., 1985, vol. 39, pp. 475-84.
34. M.J. Stiger, N.M. Yanar, M.G. Topping, F.S. Pettit, and G.H. Meier: Z. Metallkd., 1999, vol. 90, pp. 1069-78.
35. F.A. Elrefaie and W.W. Smeltzer: J. Electrochem. Soc., 1981, vol. 128, pp. 2237-42.
36. C.H.P. Lupis: Chemical Thermodynamics of Materials, Prentice-Hall, New York, NY, 1993.
37. E.A.A. Jarvis, A.C. Christensen, and E.A. Carter: Surface Sci., 2001, vol. 487, pp. 55-76.
38. A. Christensen, E.A. Asche, and E.A. Carter: Adv. Ser. Phys. Chem., 2001, vol. 11, pp. 490-546.
39. R. Prescott and M.J. Graham: Oxid. Met., 1992, vol. 38, pp. 233-54.