Effect of process parameters on planar flow cast Al-Cu ribbons

International Journal of Cast Metals Research

Volumn 10, Issue 4, 1998, Pages 181-190

  Lee, S M ^a   O'Reilly, K A Q ^b   Hong, C P ^a   Cantor, B ^b  

^a Yonsei University   (South Korea)

^b UNIVERSITY OF OXFORD   (United Kingdom)

Author keywords

Gas pocket; Microstructural transition; Planar flow casting; Preferred orientation; Process parameters; Ribbon thickness

Indexed keywords

EID: 21944434368     PISSN: 13640461     EISSN: None     Source Type: Journal    
DOI: 10.1080/13640461.1998.11819234     Document Type: Article

References (35)

1. B. Cantor (ed), 'Rapidly quenched Metals III' (Metals Society, London, UK, 1978).
2. T. Masumoto and K. Suzuki (eds), 'Rapidly Quenched Metals IV' (Japan Institute of Metals, Sendai, 1982).
3. S. Steeb and H. Warlimont (eds), 'Rapidly Quenched Metals V' (North-Holland, Amsterdam, 1985).
4. R. W. Cochrane and J. O. Strom-Olsen (eds), 'Rapidly quenched Metals VI' (Montreal, Canada, 1987).
5. H. Frederiksson and S. Savage (eds), 'Rapidly Quenched Materials VII' (Stockholm, Sweden, 1990).
6. E. F. Matthys (ed), "Melt Spinning and Strip Casting: Research and Implementation" (TMS, San Diego, 1992).
7. T. Masumoto and K. Hashimoto (eds), 'Rapidly Quenched and Metastable Materials VIII' (Sendai, Japan, 1993).
8. P. Duhaj, P. Mrafko and P. Svec (eds), 'Rapidly Quenched and Metastable Materials VIIII' (Bratislava, Slovakia, 1996).
9. H. Warlimont and K. Emmerich, "Rapidly cast crystal-line thin sheet materials", in Proc. 2nd Int. Conf. on Rapidly Solidified Materials, ASM, San Diego, 1988, 73-84.
10. N. J. Grant, "Recent trends and developments with rapidly solidified materials", Metall. Trans., 1992, 23A, 1083-1093.
11. S. K. Das, B. H Kear and C. M. Adam (eds), 'Rapidly Solidified Crystalline Alloys' (TMS-AIME, New Jersey, 1985).
12. T. F. Ciszek, "Technics for the crystal growth of silicon ingots and ribbons". J. of Crystal Growth, 1984, 66, 655-672.
13. B. Chalmers, "High speed growth of sheet materials", J. of Crystal Growth, 1984, 70, 3-10.
14. T. R. Anthony and H. E. Cline, "Dimensional variations in Newtonian quenched metal ribbons formed by melt spinning and melt extraction", J. of Appl. Phys., 1979, 50(1), 245-254.
15. A. G. Gillen and B. Cantor, "Photocalorimetric cooling rate measurements on a Ni-5wt%Al alloy rapidly solidified by melt spinning", Acta Metall., 1985, 33(10), 1813-1825.
16. D. Pavuna, "Production of metallic glass ribbons by the chill-block melt-spinning technique in stabilized laboratory conditions", J. of Mat. Sci, 1981, 16, 2419-2433.
17. R. W. Jech, T. J. Moore, T. K. Glasgow and N. W. Orth, "Rapid solidification via melt spinning: equipment and techniques", J. of Metals, 1984, April, 41-45.
18. H. Fiedler, H. Muhlbach and G. Stephani, "The effect of the main processing parameters on the geometry of amorphous metal ribbons during planar flow casting (PFC), J. of Mat. Sci., 1984, 19, 3229-3235.
19. L. A. Anestiev, "An analysis of the dependence between the ribbon dimensions and the technical parameters for the planar flow castings method", Mat. Sci. & Eng., 1991, A131, 115-121.
20. P. D. Wilde and E. F. Matthys, "Experimental investigation of the planar flow casting process: development and free surface characteristics of the solidification puddle", Mat. Sci. & Eng., 1992, A150, 237-247.
21. J. K. Carpenter and P. H. Steen, "Planar-flow spin-casting of molten metals; process behaviour, J. of Mat. Sci., 1992, 27, 215-225.
22. S. C. Huang and H. C. Fielder, "Effects of wheel surface conditions on the casting of amorphous metal ribbons", Metall. Trans., 1981, 12A, 1107-1112.
23. W. T. Kim and B. Cantor, "The variation of grain size with cooling rate during melt spinning", Scripta Metall. et Mater., 1990, 24, 633-637.
24. B. Cantor, W. T. Kim, B. P. Bewlay and A. G. Gillen, "Microstructure-cooling rate correlations in melt-spun alloys", J. of Mat. Sci., 1991, 26, 1266-1276.
25. S. Kavesh, 'Metallic Glasses' ASM, Metals Park, (1976) 36.
26. D. Ma and P. R. Sahm, "Solidification behavior of superalloy In 939 in melt spinning", Acta Metall. Mater, 1992, 40(2), 251-257.
27. C. Hayzelden, J. J. Rayment and B. Cantor, "Rapid solidification microstructures in austenitic Fe-Ni alloys", Acta Metall., 1983, 31(3), 379-386.
28. A. J. B. Vincent, B. P. Bewley, B. Cantor, R. J. Zabala, R. P. La Force, S. C. Huang and L. A. Johnson, "Cooling rates and microstructure in planar flow cast Ni-20wt%Al", J. of Mat, Sci. Letters, 1987, 6, 121-124.
29. W. T. Kim, B. Cantor and T. M. Kim, "Microstructure of rapidly solidified eutectic and hypereutectic Al-Cu alloys", Int. J. of Rapid Solidification, 1990, 5, 251-276.
30. S. M. Lee, K. Y. Lee and C. P. Hong, "Production of continuous polycrystalline Al-Cu ribbons by planar flow casting and solidification structures", in Proc. of Conf. on Synthesis of Light-weight Metallic Materials II, TMS, Florida, 1997 (in press)
31. K. Y. Lee and C. P. Hong, "Stochastic modeling of solidification grain structures of Al-Cu crystalline ribbons in planar flow casting", ISIJ International, 1997, 37(1), 38-46.
32. S. M. Lee and C. P. Hong, "Effects of wheel surface condition on solidification behaviour and columnar grain growth in Al-4.3 wt%Cu ribbons", Scripta Metallurgica et Materialia, 1997, 37(2), 165-171.
33. K. Y. Lee, S. M. Lee and C. P. Hong, "Modelling of fluid flow and solidification grain structures of Al-Cu crystalline ribbons in planar flow casting", in Proc. of Conf. on Solidification Processing 97, Sheffield, UK, 1997, 380-384.
34. K. Murakami, T. Fujiyama, A. Koike and T. Okamoto, "Influence of melt flow on the growth directions of columnar grains and columnar dendrites", Acta Metall. Mater., 1983, 31(9), 1425-1432.
35. K. Murakami, H. Aihara and T. Okamoto, "Growth direction of columnar crystals solidified in flowing melt", Acta Metall. Mater., 1984, 32(6), 933-939.