Analyzing the laws of stable subcritical growth of cracks in polymeric materials on the basis of fracture mesomechanics models. Theory and experiment

International Applied Mechanics

Volumn 40, Issue 8, 2004, Pages 829-846

  Kaminskii, A A ^a  

^a S P TIMOSHENKO INSTITUTE OF MECHANICS   (Ukraine)

Author keywords

Critical opening displacement; Fracture mode; Long term tension; Mesomechanics; Polymeric material; Process zone; Stable crack growth

Indexed keywords

CRITICAL OPENING DISPLACEMENT; FRACTURE MODE; LONG-TERM TENSION; MESOMECHANICS; PROCESS ZONE; STABLE CRACK GROWTH;

ELASTIC MODULI; FLUORINE CONTAINING POLYMERS; FRACTURE MECHANICS; MATHEMATICAL MODELS; MICROSTRUCTURE; RHEOLOGY; STRESSES; VISCOELASTICITY;

CRACK INITIATION;

EID: 21844434915     PISSN: 10637095     EISSN: 15738582     Source Type: Journal    
DOI: 10.1023/B:INAM.0000048678.90425.86     Document Type: Article

References (89)

1. G. I. Barenblatt, "Mathematical theory of equilibrium brittle-fracture cracks," Zh. Prikl. Mekh. Tekhn. Fiz., No. 4, 3-56 (1961).
2. G. I. Barenblatt, V. M. Entov, and R. L. Salganik, "Kinetics of crack propagation: General concepts. Nearly equilibrium cracks," Inzh. Zh. Mekh. Tverd. Tela, No. 5, 82-92 (1966).
3. M. I. Bessonov and E. V. Kuvshinskii, "Features of crack development in solid polymers," Fiz. Tverd. Tela, 3, No. 2, 607-610 (1961).
4. M. I. Bessonov, "Mechanical failure of solid polymers," Usp. Fiz. Nauk, 83, No. 1, 107-135 (1964).
5. I. L. Bugakov, Creep of Polymeric Materials [in Russian], Nauka, Moscow (1973).
6. A. S. Vavakin, Yu. M. Kozyrev, and R. L. Salganik, "Stress-strain state of the crack-tip region in polymethylmethacrylate," Izv. AN SSSR, Mekh. Tverd. Tela, No. 2, 111-120 (1970).
7. G. V. Galatenko, "Influence of nonuniform stress distribution in a large tip region on crack growth in viscoelastic media," Prikl. Mekh., 19, No. 6, 80-85 (1983).
8. V. G. Gromov, "A note on solving boundary-value problems of linear viscoelasticity," Mekh. Palim., No. 6, 999-1011 (1967).
9. A. N. Guz, "Description and study of some nonclassical problems of fracture mechanics and related mechanisms," Int. Appl. Mech., 36, No. 12, 1537-1565 (2000).
10. A. N. Guz, A. A. Kaminskii, and V. M. Nazarenko, Fracture Mechanics, Vol. 5 of the 12-volume series Mechanics of Composites [in Russian], A.S.K., Kiev (1996).
11. V. E. Gul', Strength of Polymers [in Russian] Khimiya, Leningrad-Moscow (1964).
12. V. M. Entov and R. L. Salganik, "A Prandtl crack in a viscoelastic body: Stationary crack propagation," Izv. AN SSSR, Mekh. Tverd. Tela, No. 6, 41-60 (1969).
13. A. A. Kaminskii, "Kinetics of crack development in solid polymers," Dokl. AN USSR, Ser. A, No. 7, 660-665 (1968).
14. A. A. Kaminskii, "Slow crack growth in viscoelastic bodies," Dokl. AN USSR, Ser. A, No. 5, 424-427 (1975).
15. A. A. Kaminskii, "Kinetics of crack development in a viscoelastic orthotropic plate," Dokl. AN USSR, Ser. A, No. 12, 1098-1101 (1975).
16. A. A. Kaminskii, "Studying crack growth in a viscoelastic anisotropic plate," Prikl. Mekh., 12, No. 6, 76-84 (1976).
17. A. A. Kaminskii, "Subcritical growth of a crack with a large plastic zone in a viscoelastic medium," Prikl. Mekh., 14, No. 10, 82-89 (1978).
18. A. A. Kaminskii, "Life of viscoelastic bodies with cracks," Dokl. AN SSSR, 248, No. 4, 819-821 (1979).
19. A. A. Kaminskii, "Life of viscoelastic plates with cracks," Prikl. Mekh., 16, No. 5, 15-22 (1980).
20. A. A. Kaminskii, "Kinetics of crack growth in viscoelastic bodies under cyclic loads," Dokl. AN USSR, Ser. A, No. 5, 34-37 (1980).
21. A. A. Kaminskii, "Subcritical crack growth in viscoelastic bodies under variable loads," Prikl. Mekh., 16, No. 6, 25-33 (1980).
22. A. A. Kaminskii, Fracture Mechanics of Viscoelastic Bodies [in Russian], Naukova Dumka, Kiev (1980).
23. A. A. Kaminskii, Brittle Fracture near Holes [in Russian], Naukova Dumka, Kiev (1982).
24. A. A. Kaminskii, "Subcritical growth of fatigue microcracks in viscoelastic bodies," Prikl. Mekh., 19, No. 11, 36-39 (1983).
25. A. A. Kaminskii, Fracture of Viscoelastic Bodies with Cracks [in Russian], Naukova Dumka, Kiev (1990).
26. A. A. Kaminskii, "Rheological structural model of a crack in a viscoelastic composite material," Prikl. Mekh., 28, No. 7, 12-18 (1992).
27. A. A. Kaminskii, "Mechanics of long-term fracture of viscoelastic composite materials," Prikl. Mekh., 29, No. 10, 50-57 (1993).
28. A. A. Kaminskii and G. V. Galatenko, "Subcritical crack growth in a viscoelastic medium with nonlinear stress distribution in the crack-tip region," Prikl Mekh., 19, No. 12, 78-86 (1983).
29. A. A. Kaminskii and D. A. Gavrilov, "Influence of rheological properties on the laws of fracture of a viscous quasielastic body," Prikl. Mekh., 21, No. 7, 92-98 (1985).
30. A. A. Kaminskii and D. A. Gavrilov, Fracture Mechanics of Polymers [in Russian], Naukova Dumka, Kiev (1988).
31. A. A. Kaminskii and D. A. Gavrilov, Long-Term Fracture of Polymeric and Composite Materials with Cracks [in Russian], Naukova Dumka, Kiev (1992).
32. A. A. Kaminskii, D. A. Gavrilov, and V. A. Markov, "Subcritical crack growth in a polymeric composite material," Prikl. Mekh., 22, No. 10, 3-7 (1986).
33. A. A. Kaminskii and S. V. Mikhailenko, "Subcritical development of a crack with a large process zone in a viscoelastic material," Prikl. Mekh., 25, No. 7, 66-73 (1989).
34. Von H. H. Kausch, Polymer Fracture, Springer Verlag, Berlin (1978).
35. W. G. Knauss, "The mechanics of polymer fracture," Appl. Mech. Rev., 26, No. 1, 1-17 (1973).
36. L. V. Onyshko, "Influence of the law of distribution of forces acting among microcrack surfaces on the fracture conditions of a brittle body," Vopr. Mekh. Real. Tverd. Tela, 2, 38-48 (1964).
37. P. A. Pavlov and S. Zhunisbekov, "Studying the initial stage of crack development in PMMC samples under tension and compression," Probl. Prochn., No. 8, 14-18 (1973).
38. V. V. Panasyuk, Limit Equilibrium of Brittle Bodies with Cracks [in Russian], Naukova Dumka, Kiev (1968).
39. V. Z. Parton and E. M. Morozov, Mechanics of Elastoplastic Fracture [in Russian], Nauka, Moscow (1985).
40. Yu. N. Rabotnov, Elements of the Hereditary Mechanics of Solids [in Russian], Nauka, Moscow (1977).
41. G. N. Savin and A. A. Kaminskii, "Crack growth in fracture of solid polymers," Prikl. Mekh., 3, No. 3, 33-39 (1967).
42. G. N. Savin, Stress Distribution near Holes [in Russian], Naukova Dumka, Kiev (1968).
43. G. M. Savin, An Introduction to the Mechanics of Polymers [in Ukrainian], Izd. Kyiv. Univ., Kiev (1968).
44. G. N. Savin and A. A. Kaminskii, "A fracture model for viscoelastic media," Prikl. Mekh., 7, No. 9, 3-12 (1971).
45. V. P. Tamusz and V. S. Kuksenko, Fracture Micromechanics of Polymeric Materials [in Russian], Zinatne, Riga (1978).
46. J. D. Ferry, Viscoelastic Properties of Polymers, 3rd ed., Wiley, New York (1980).
47. G. P. Cherepanov, Brittle Fracture Mechanics [in Russian], Nauka, Moscow (1974).
48. C. Atkinson and R. V. Craster, "Theoretical aspects of fracture mechanics," Prog. Aerospace Sci., 31, 1-83 (1995).
49. Z. P. Bazant, "Cohesive crack with rate-dependent opening and viscoelasticity: I. Mathematical model and scaling," Int. J. Fract., 86, No. 3, 247-265 (1997).
50. P. Beahan, M. Beois, and D. Hull, "The morphology of crazes in polystyrene," Phil. Mag., 24, No. 12, 1267-1279 (1971).
51. L. Boltzmann, "Zur Theorie elastischen Nachwirkung," Sitzungsber. Bayer Akad. Wiss. Math-Naturwiss., K1, 70, No. 2, 315-325 (1874).
52. B. N. Cox and D. B. Marshall, "Concepts for bridged cracks in fracture and fatigue," Acta Metall. Mater., 42, No. 2, 341-363 (1994).
53. W. Doll, M. G. Schinker, and L. Koenczoel, "A time independent fracture criterion for PMMA," Int. J. Fract., 15, R145-R149 (1979).
54. A. N. Guz, "On one two-level model in the mesomechanics of compression fracture of cracked composites," Int. Appl. Mech., 39, No. 3, 274-285 (2003).
55. J. Hoare and D. Hull, "Craze yielding and stress-strain characteristics of crazes in polystyrene," Phil. Mag., 26, No. 2, 443-455 (1971).
56. R. P. Kambour, "Mechanism of fracture in glassy polymers. I. Fracture surface in polymethilmethacrylate," J. Polym. Sci., Part A, 3, 1713-1721 (1965).
57. R. P. Kambour, "The role of crazing in the mechanism of fracture of glassy polymers," Appl. Polym. Symp., 7, 215-235 (1968).
58. A. A. Kaminsky, "Subcritical growth of cracks with non-small plastic zones in viscoelastic bodies," in: Proc. 6th Int. Conf. on Advances in Fracture Research, India, 4, 2849-2858 (1985).
59. A. A. Kaminskii, "Subcritical crack growth in polymer composite materials under creep," in: Advances in Fracture Resistance and Structural Integrity (Selected papers from ICF8), Pergamon (1994), pp. 513-520.
60. A. A. Kaminskii, "Investigations in the field of the mechanics of the fracture of viscoelastic bodies," Sov. Appl. Mech., 16, No. 9, 741-760 (1981).
61. A.A. Kaminskii, "Laws of growth of the prefecture zone at the edge of a macrocrack in a polymeric material," Sov. Appl. Mech., 24, No. 2, 163-169 (1988).
62. A. A. Kaminsky, "Subcritical crack growth in polymer composite materials," in: G. Cherepanov (ed.), Fracture: A Topical Encyclopedia of Current Knowledge, Krieger Publishing Co., Malabar, USA (1998), pp. 758-763.
63. A. A. Kaminsky and Y. A. Chernoivan, "Closing of the cleavage crack in isotropic viscoelastic body," Int. J. Fract., 113, 9-14 (2002).
64. A. A. Kaminsky and Y. A. Chernoivan, "On the crack in viscoelastic isotropic media opened by the rigid growing wedge," Int. J. Fract., 117, 15-19 (2002).
65. A. A. Kaminskii, D. A. Gavrilov, and V. N. Patsaev, "Experimental verification of the postulates of the mechanics of long-term fracture of viscoelastic polymers," Sov. Appl. Mech., 20, No. 9, 801-806 (1984).
66. A. A. Kaminsky and G. V. Gavrilov, "Long-term fracture of an aging transversally isotropic composite with a circular crack under stationary loading," in: Proc. ECF 13, San Sebastian, Spain, CD ROM 8V.254 (2000).
67. A. A. Kaminskii and G. V. Gavrilov, "Subcritical crack growth in an aging viscoelastic composite under plane strain conditions," Int. Appl. Mech., 38, No. 2, 181-187 (2002).
68. A. A. Kaminsky and G. V. Gavrilov, "Initiation and stable growth of penny-shaped crack in aging viscoelastic transversally isotropic material, " Theor. Appl. Fract. Mech., 38, 243-254 (2002).
69. A. A. Kaminsky and M. F. Selivanov, "Stable growth of penny-shaped crack in viscoelastic composite material under time-dependent loading," Theor. Appl. Fract. Mech., 35, 211-218 (2001).
70. A. A. Kaminskii and M. F. Selivanov, "The long-term fracture of the layered viscoelastic plate with through crack under the changing in time load," Int. Appl. Mech., 38, No. 6, 731-740 (2002).
71. A.A. Kaminskii and M. F. Selivanov, "Viscoelastic deformation of a reinforced plate with a crack," Int. Appl. Mech., 38, No. 12, 1508-1517 (2002).
72. H. H. Kausch, "Energetische überlegungen zur Rissfortpflanzung in Thermoplasten," Kunst. Stoffe., 66, No. 9, 538-544 (1976).
73. W. G. Knauss, "Time dependent fracture and cohesive zones," Trans. ASME, J. Eng. Mater. Techn., 115, No. 6, 262-267 (1993).
74. J. Lilley and D. G. Holloway, "Crazing in epoxy resins," Phil. Mag., 28, No. 1, 215-220 (1973).
75. Y. W. Mai, "Quasi-static cracking in polycarbonate," Int. J. Fract., 9, No. 3, 349-351 (1973).
76. G. P. Marshall, L. P. Culver, and J. G. Williams, "Crack and craze propagation in polymers: A fracture mechanics approach. I. Crack growth in polymethilmethacrylate in air," in: Plastics and Polymers, Headington Hill Hall, Oxford (1969), pp. 75-87.
77. G. P. Marshall, L. P. Culver, and J. G. Williams, "Craze growth in polymethylmetacrylate: a fracture mechanics approach," Proc. Roy. Soc. London, 319, 1536-1539 (1970).
78. G. P. Marshall, L. P. Culver, and J. G. Williams, "Fracture phenomena in polystyrene," Int. J. Fract., 9, No. 3, 295-309 (1973).
79. L. N. McCartney, "Crack propagation, resulting from a monotonic increasing applied stress, in a linear viscoelastic material," Int. J. Fract., 13, No. 5, 641-654 (1977).
80. L. N. McCartney, "Crack propagation in linear viscoelastic solids: some new results," Int J. Fract., 13, No. 5, 547-554 (1979).
81. J. Narisawa and T. Kondo, "Kinetics of craze formation in glassy polymers," J. Polym. Sci (Polym. Phys. ED.), 11, 223-232 (1973).
82. R. A. Schapery, "A theory of crack initiation and growth in viscoelastic media," Int. J. Fract., 11, No. 1, 141-159 (1975).
83. R. A. Schapery, "Time-dependent fracture: Continuum aspects of crack growth," in: M. B. Bever (ed.), Encyclopedia of Materials Science and Engineering, Pergamon Press, Oxford-New York (1986), pp. 5043-5053.
84. R. A. Schapery, "A method of viscoelastic stress analysis using elastic solutions," J. Franklin Inst., 279, No. 4, 268-289 (1966).
85. G. C. Sih and B. Liu, "Mesofracture mechanics: a necessary link," Theor. Appl. Fract. Mech., 37, 371-395 (2001).
86. M. L. Williams, "The kinetic energy contribution to fracture propagation in a linearly viscoelastic material," Int. J. Fract. Mech., No. 4, 69-78 (1968).
87. J. G. Williams, "Visco-elastic thermal effects on crack growth in PMMA," Int. J. Fract. Mech., 8, No. 4, 393-401 (1972).
88. J. G. Williams, Fracture Mechanics of Polymers, Wiley, New York (1984).
89. M. P. Wnuk, "Initiation of fracture in viscoelastic solids, experiment vs. theory," in: Proc. Int. Symp. on Experimental Mechanics, University of Waterloo, June (1972), pp. 673-684.