A new cannula to ease cement injection during vertebroplasty

European Spine Journal

Volumn 14, Issue 5, 2005, Pages 474-479

  Baroud, G ^a,b   Steffen, T ^a  

^a ROYAL VICTORIA HOSPITAL   (Canada)

^b UNIVERSITÉ DE SHERBROOKE   (Canada)

Author keywords

Cannula; Cement delivery; Injection pressure; Osteoporosis; Vertebroplasty

Indexed keywords

BONE CEMENT;

ARTICLE; CANNULA; COST EFFECTIVENESS ANALYSIS; FEASIBILITY STUDY; GEOMETRY; PERCUTANEOUS VERTEBROPLASTY; PRESSURE; PRIORITY JOURNAL;

ACRYLATES; ARTHROPLASTY; BONE CEMENTS; CATHETERIZATION; EQUIPMENT DESIGN; HUMANS; INJECTIONS; MODELS, THEORETICAL; PRESSURE; SILICONE OILS; SPINE;

EID: 21544463717     PISSN: 09406719     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00586-004-0822-1     Document Type: Article

References (29)

1. Al-Assir I, Perez-Higueras A, Florensa J, Munoz A, Cuesta E (2000) Percutaneous vertebroplasty: a special syringe for cement injection. AJNR Am J Neuroradiol 21:159-161
2. Amar AP, Larson DW, Teitelbaum GP (2003) Use of a screw-syringe injector for cement delivery during kyphoplasty. Neurosurgery 53:380-383
3. Arramon YP, McIntyre S (2002) Cannula system for hard tissue implant delivery. US Patent Application
4. Baroud G, Beckman L, Heini P, Ferguson S, Steffen T (2003) Clinical and laboratory analysis of the pressure at injection in a vertebroplasty. In: Annual meeting of International Society of the Study of the Lumber Spine, Vancouver (Abstract 279)
5. Baroud G, Heini P, Bohner M, Ferguson S, Steffen T (2003) Drop in pressure at injection and infiltration in vertebroplasty. In: 13th interdisciplinary research conference on biomaterials (GRIBOI 2003), Baltimore
6. Baroud G, Wu J, Bohner M, Sponagel S, Steffen T (2003) How to determine the permeability for cement infiltration into osteoporotic cancellous bone. Med Eng Phys 25:283-288
7. Baroud G, Bohner M, Heini P, Steffen T (2004) Injection biomechanics of bone cements used in vertebroplasty. Biomed Mater Eng 14(4):487-504
8. Baroud G, Falk R, Crookshank M, Sponagel S, Steffen T (2004) Experimental and theoretical investigation of the directional permeability of cancellous bone for cement infiltration. J Biomech 37:189-196
9. Baroud G, Matsushita C, Samara M, Steffen T (2004) Influence of oscillatory mixing on the injectability of three acrylic and two calcium-phosphate bone cements for vertebroplasty. J Biomed Mater Res 68:105-111
10. Baroud G, Samara M, Steffen T (2004) Influence of mixing method on the cement temperature-mixing time history and doughing time of three acrylic cements for vertebroplasty. J Biomed Mater Res 68:112-116
11. Baroud G, Vant C, Giannitsios D, Bohner M, Steffen T (2005) Effect of vertebral shell on injection pressure in vertebroplasty. Spine 30:68-74
12. Belkoff SM, Sanders JC, Jasper LE (2002) The effect of the monomer-to-powder ratio on the material properties of acrylic bone cement. J Biomed Mater Res 3:396-399
13. Bohner M, Baroud G (2003) Experimental results to assess the relevance of a theoretical model describing the injectability of powder - liquid mixtures. In: 13th interdisciplinary research conference on biomaterials (GRIBOI 2003), Baltimore
14. Bohner M, Gasser B, Baroud G, Heini P (2003) Theoretical and experimental model to describe the injection of a polymethylmethacrylate cement into a porous structure. Biomaterials 24:2721-2730
15. Breusch S, Heisel C, Mueller J, Borchers T, Mau H (2002) Influence of cement viscosity on cement interdigitation and venous fat content under in vivo conditions. Acta Orthop Scand 73:409-415
16. Chavali R, Resijek R, Knight SK, Choi IS (2003) Extending polymerization time of polymethylmethacrylate cement in percutaneous vertebroplasty with ice bath cooling. AJNR Am J Neuroradiol 24:545-546
17. Cotten A, Boutry N, Cortet B, Assaker R, Demondion X, Leblond D, Chastanet P, Duquesnoy B, Deramond H (1998) Percutaneous vertebroplasty: state of the art. Radiographics 18:311-323
18. Deramond H, Depriester C, Toussaint P, Galibert P (1997) Percutaneous vertebroplasty. Semin Musculoskelet Radiol 1:285-295
19. Deramond H, Depriester C, Galibert P, Le Gars D (1998) Percutaneous vertebroplasty with polymethylmethacrylate. Radiol Clin North Am 36:533-546
20. Fourney DR, Schomer DF, Nader R, Chlan-Fourney J, Suki D, Ahrer R, Rhines LD, Gokaslan ZL (2003) Percutaneous vertebroplasty and kyphoplasty for painful vertebral body in cancer patients. J Neurosurg 98(Spine 1):21-30
21. Heini PF, Walchli B, Berlemann U (2000) Percutaneous transpedicular vertebroplasty with PMMA: operative technique and early results. A prospective study for the treatment of osteoporotic compression fractures. Eur Spine J 9:445-450
22. Jensen ME, Kallmes DF (2002) Percutaneous vertebroplasty in the treatment of malignant spine disease. Cancer J 8:194-206
23. Jensen ME, Evans AJ, Mathis JM, Kallmes DF, Cloft HJ, Dion JE (1997) Percutaneous polymethylmethacrylate vertebroplasty in the treatment of osteoporotic vertebral body compression fractures: technical aspects. Am J Neuroradiol 18:1897-1904
24. Mathis JM, Barr JD, Belkoff SM, Barr MS, Jensen ME, Deramond H (2001) Percutaneous vertebroplasty: a developing standard of care for vertebral compression fractures. Am J Neuroradiol 22:373-381
25. Preissman HE (2002) High pressure applicator. US Patent 6,383,190 B1
26. Reidy D, Ahn H, Mousavi P, Finkelsein J, Whyne CM (2003) A biomechanical analysis of intravertebral pressures during vertebroplasty of cadaveric spines with and without simulated metastases. Spine 28:1534-1539
27. San Millan Ruiz D, Burkhardt K, Jean B, Muster M, Martin JB, Bouvier J, Fasel JH, Rufenacht DA, Kurt AM (1999) Pathology findings with acrylic implants. Bone 25:85S-90S
28. Schallen EH, Gilula LA (2002) Vertebroplasty: reusable flange converter with hub lock for injection of polymethyl-methacrylate with screw-plunger syringe. Radio 222:851-855
29. Tomita S, Molloy S, Abe M, Belkoff SM (2003) Ex vivo measurement of intravertebral pressure during vertebroplasty. In: 13th interdisciplinary research conference on biomaterials (GRIBOI 2003), Baltimore