Vertical alveolar ridge augmentation by means of a titanium mesh and autogenous bone grafts

Clinical Oral Implants Research

Volumn 15, Issue 1, 2004, Pages 73-81

  Roccuzzo, Mario ^a,b   Ramieri, Guglielmo ^a   Spada, Mario Cristina ^a   Bianchi, Silvio Diego ^a   Berrone, Sid ^a  

^a UNIVERSITY OF TURIN   (Italy)

^b NONE   (Italy)

Author keywords

Autogenous bone graft; Bone augmentation; Dental implants; Titanium mesh; Vertical ridge augmentation

Indexed keywords

TITANIUM;

ADULT; ALVEOLAR BONE; ARTICLE; AUTOGRAFT; CLINICAL ARTICLE; CLINICAL PROTOCOL; CONTROLLED STUDY; DONOR SITE; EDENTULOUSNESS; FEMALE; GRAFT PRESERVATION; HUMAN; HUMAN TISSUE; MALE; MANDIBLE; MAXILLA; MOUTH MUCOSA; OSSIFICATION; PATIENT SELECTION; RECIPIENT; SURGICAL TECHNIQUE; TOOTH IMPLANTATION; TOOTH OCCLUSION; TOOTH PROSTHESIS; TREATMENT OUTCOME; BONE TRANSPLANTATION; METHODOLOGY; MIDDLE AGED; ORAL SURGERY; SURGICAL EQUIPMENT;

ADULT; ALVEOLAR RIDGE AUGMENTATION; BONE TRANSPLANTATION; DENTAL IMPLANTATION, ENDOSSEOUS; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; FEMALE; HUMANS; JAW, EDENTULOUS, PARTIALLY; MALE; MIDDLE AGED; SURGICAL MESH; TITANIUM; VERTICAL DIMENSION;

EID: 2142806762     PISSN: 09057161     EISSN: None     Source Type: Journal    
DOI: 10.1111/j.1600-0501.2004.00998.x     Document Type: Article

References (41)

1. Antoun, H., Sitbon, J.M., Martinez, H. & Missika, P. (2001) A prospective randomized study comparing two technique of bone augmentation: onlay graft alone or associated with a membrane. Clinical Oral Implants Research 12: 632-639.
2. von Arx, T. & Kurt, B. (1999) Implant placement and simultaneous ridge augmentation using autogenous bone and a micro titanium mesh: a prospective clinical study with 20 implants. Clinical Oral Implants Research 10: 24-33.
3. von Arx, T., Hardt, N. & Wallkamm, B. (1996) The TIME technique: A new method for localized alveolar ridge augmentation prior to placement of dental implants. International Journal of Oral & Maxillofacial Implants 11: 387-394.
4. von Arx, T., Wallkamm, B. & Hardt, N. (1998) Localized ridge augmentation using a micro titanium mesh: a report on 27 implants followed from 1 to 3 years after functional loading. Clinical Oral Implants Research 9: 123-130.
5. Bahat, O. & Fontanesi (2001a) Efficacy of implant placement after bone grafting for three-dimensional reconstruction of the posterior jaw. International Journal of Periodontics & Restorative Dentistry 21: 221-231.
6. Bahat, O. & Fontanesi, R. (2001b) Implant placement in three-dimensional grafts in the anterior jaw. International Journal of Periodontics & Restorative Dentistry 21: 357-365.
7. Bahat, O. & Fontanesi, R. (2001c) Complications of grafting in the atrophic edentulous or partially edentulous jaw. International Journal of Periodontics & Restorative Dentistry 21: 487-495.
8. Bianchi, S.D., Lojacono, A., Nevins, M., Ramieri, G., Corrente, G., Martuscelli, G. & Fiorellini, J.P. (1997) The use of replicate resin models in the treatment of maxillary sinus augmentation patients. International Journal of Periodontics & Restorative Dentistry 17: 349-357.
9. Boyne, P.J. (1969) Restoration of osseous defects in maxillofacial casualties. Journal of the American Dental Association 78: 767-776.
10. Boyne, P.J., Cole, M.D., Stringer, D. & Shafqat, J.P. (1985) A technique for osseous restoration of deficient edentulous maxillary ridges. Journal of Oral and Maxillofacial Surgery 43: 87-91.
11. Buser, D., Dula, K., Hirt, H.P. & Schenk, R. (1996) Lateral ridge augmentation using autografts and barrier membranes: a clinical study with 40 apartially edentulous patients. Journal of Oral and Maxillofacial Surgery 54: 420-432.
12. Buser, D., Ingimarsson, S., Dula, K., Lussi, A., Hirt, H.P. & Belser, U.C. (2002) Long-term stability of osseointegrated implants in augmented bone: a 5-year prospective study in partially edentulous patients. International Journal of Periodontics & Restorative Dentistry 22: 108-117.
13. Cawood, J.I. & Howell, R.A. (1988) A classification of the edentulous jaws. International Journal of Oral and Maxillofacial Surgery 17: 232-236.
14. Chiapasco, M., Abati, S., Romeo, E. & Vogel, G. (1999) Clinical outcome of autogenous bone blocks or guided bone regeneration with e-PTFE membranes for the reconstruction of narrow edentulous ridges. Clinical Oral Implants Research 10: 278-288.
15. Chiapasco, M., Romeo, E. & Vogel, G. (2001) Vertical distraction osteogenesis of edentulous ridges for improvement of oral implant positioning: a clinical report of preliminary results. International Journal of Oral & Maxillofacial Implants 16: 43-51.
16. Cordaro, L., Sarzi Amadè, D. & Cordaro, M. (2002) Clinical results of alveolar ridge augmentation with mandibular block bone grafts in partially edentulous patients prior to implant placement. Clinical Oral Implants Research 13: 103-111.
17. D'Addona, A. & Nowzari, H. (2001) Intramembranous autogenous osseous transplants in aesthetic treatment of alveolar atrophy. Periodontology 2000 27: 148-161.
18. Fiorellini, J.P. & Weber, H.P. (1994) Clinical trials on the prognosis of dental implants. Periodontology 2000 4: 98-108.
19. Gongloff, R.K., Cole, M., Whitlow, W. & Boyne, P.J. (1986) Titanium mesh and particulate cancellous bone and marrow grafts to augment the maxillary alveolar ridge. International Journal of Oral and Maxillofacial Surgery 15: 263-268.
20. Hunt, D.R. & Jovanovic, S.A. (1999) Autogenous bone harvesting: a chin graft technique for particulate and monocortical bone blocks. International Journal of Periodontics & Restorative Dentistry 19: 165-173.
21. Jakse, N., Seibert, F.J., Lorenzoni, M., Eskici, A. & Pertl, C. (2001) A modified technique of harvesting tibial cancellous bone and its use for sinus grafting. Clinical Oral Implants Research 12: 488-494.
22. Jensen, J., Sindet-Pedersen, S. & Oliver, A.J. (1994) Varying treatment strategies for reconstruction of maxillary atrophy with implants: results in 98 patients. Journal of Oral and Maxillofacial Surgery 52: 210-216.
23. Lundgren, S., Rasmusson, L., Sjostrom, M. & Sennerby, L. (1999) Simultaneous or delayed placement of titanium implants in free autogenous iliac bone grafts. Histological analysis of the bone graft-titanium interface in 10 consecutive patients. International Journal of Oral & Maxillofacial Implants 28: 31-37.
24. Maiorana, C., Santoro, F., Rabagliati, M. & Salina, S. (2001) Evaluation of the use of iliac cancellous bone and anorganic bovine bone in the reconstruction of the atrophic maxilla with titanium mesh: a clinical and histologic investigation. International Journal of Oral & Maxillofacial Implants 16: 427-432.
25. Misch, C.M. (1997) Comparison of intraoral donor sites for onlay grafting prior to implant placement. International Journal of Oral & Maxillofacial Implants 12: 767-776.
26. Misch, C.M. (1999) The harvest of ramus bone in conjunction with third molar removal for onlay grafting before placement of dental implants. Journal of Oral and Maxillofacial Surgery 57: 1376-1379.
27. Misch, C.M. (2000) Use of the mandibular ramus as a donor site for onlay bone grafting. Journal of Oral Implantology 26: 42-49.
28. Misch, C.M., Misch, C.E., Resnik, R.R. & Ismail, Y.H. (1992) Reconstruction of maxillary alveolar defects with mandibular symphysis grafts for dental implants: a preliminary procedural report. International Journal of Oral & Maxillofacial Implants 7: 360-366.
29. Montazem, A., Valauri, D.V., St-Hilaire, H. & Buchbinder, D. (2000) The mandibular symphysis as a donor site in maxillofacial bone grafting: a quantitative anatomic study. Journal of Oral and Maxillofacial Surgery 58: 1368-1371.
30. Nkenke, E., Schultze-Mosgau, S., Radespiel-Tröger, M., Kloss, F. & Neukam, F.W. (2001) Morbidity of harvesting of chin grafts: a prospective study. Clinical Oral Implants Research 12: 495-502.
31. Nkenke, E., Radespiel-Troger, M., Wiltfang, J., Schultze-Mosgau, S., Winkler, G. & Neukan, F.M. (2002) Morbidity of harvesting of retromolar bone grafts: a prospective study. Clinical Oral Implants Research 13: 514-521.
32. Proussaefs, P., Lozada, J., Kleinman, A. & Rohrer, M.D. (2002a) The use of ramus autogenous block grafts for vertical alveolar ridge augmentation and implant placement: a pilot study. International Journal of Oral & Maxillofacial Implants 17: 238-248.
33. Proussaefs, P., Lozada, J., Valencia, G. & Tatakis, D.N. (2002b) A method to assess the clinical outcome of ridge augmentation procedures. Journal of Periodontology 73: 302-306.
34. Raghoebar, G.M., Louwersr, C., Kalk, N.W.I. & Vissink, A. (2001) Morbidity of chin harvesting. Clinical Oral Implants Research 12: 503-507.
35. Roccuzzo, M., Bunino, M., Prioglio, F. & Bianchi, S.D. (2001) Early loading of sandblasted and acid-etched (SLA) implants: a prospective split-mouth comparative study. One-year results. Clinical Oral Implants Research 12: 572-578.
36. Roccuzzo, M. & Wilson, T.G. (2002) A prospective study evaluating a protocol for 6 weeks loading of SLA implants in the posterior maxilla. One-year results. Clinical Oral Implants Research 13: 502-507.
37. Triplett, R.G. & Schow, S.R. (1996) Autologous bone grafts and endosseous implants: complementary techniques. Journal of Oral and Maxillofacial Surgery 54: 486-494.
38. Urbani, G., Lombarde, G., Santi, E. & Tarnow, D. (1998) Localized ridge augmentation with chin grafts and resorbable pins: case reports. International Journal of Periodontics & Restorative Dentistry 18: 363-375.
39. Weber, H.P., Fiorellini, J.P. & Jeffcoat, M.C. (1997) Clinical trials on placement of implants in existing bone. Annals of Periodontology 2: 315-328.
40. Williamson, R.A. (1996) Rehabilitation of the resorbed maxilla and mandible using autogenous bone grafts and osseointegrated implants. International Journal of Oral Maxillofacial Implants 11: 476-488.
41. Zeiter, D.J., Ries, W.L. & Sanders, J.J. (2000) The use of a bone block graft from the chin for alveolar ridge augmentation. International Journal of Periodontics & Restorative Dentistry 20: 619-627.