Influence of severe plastic deformations on secondary phase precipitation in a 6082 Al-Mg-Si alloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 36, Issue 5, 2005, Pages 1353-1364

  Cabibbo, M ^a   Evangelista, E ^a   Vedani, M ^b  

^a UNIVERSITÀ POLITECNICA DELLE MARCHE   (Italy)

^b POLITECNICO DI MILANO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

AGE HARDENING; DIFFERENTIAL SCANNING CALORIMETRY; HARDENING; MAGNESIUM PRINTING PLATES; PLASTIC DEFORMATION; SILICON; TRANSMISSION ELECTRON MICROSCOPY;

EQUAL CHANNEL ANGULAR PRESSING (ECAP); GRAIN REFINING MECHANISM; PHASE PRECIPITATION; SECOND-PHASE STABILITY;

ALUMINUM ALLOYS;

EID: 21344468374     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-005-0226-9     Document Type: Conference Paper

References (52)

1. A.K. Gupta, D.J. Lloyd, and S.A. Court: Mater. Sci. Eng. A, 2001, vol. 316A (1-2), pp. 11-17.
2. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper: Acta Mater., 1998, vol. 46 (11), pp. 3893-3904.
3. N. Maruyama, R. Uemori, N. Hashimoto, M. Saga, and M. Kikuchi: Scripta Mater., 1997, vol. 36 (1), pp. 89-93.
4. S.J. Andersen, H.W. Zandbergen, J. Jansen, C. Traeholt, U. Tundal, and O. Reiso: Acta Mater., 1998, vol. 46 (9), pp. 3283-98.
5. M. Murayama and K. Hono: Acta Mater., 1999, vol. 47 (5), pp. 1537-48.
6. K. Matsuda, S. Tada, S. Ikeno, T. Sato, and A. Kamio: Scripta Mater., 1995, vol. 32 (8), pp. 1175-80.
7. S. Li, S. Zhao, M. Pan, D. Zhao, X. Chen, O.M. Barabash, and R.I. Barabash: Mater. Trans. JIM, 1997, vol. 38 (6) pp. 553-60.
8. K. Matsuda, H. Gamada, K. Fuji, Y. Uteni, T. Sato, A. Kamis, and S. Ikeno: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1161-67.
9. A. Perovic, D.D. Perovic, G.C. Weatherly, and D.J. Lloyd: Scripta Mater., 1999, vol. 41 (7), pp. 703-08.
10. M. Van Rooyen, J.A. Sinte Maartensdijk, and E.J. Mittemeijer: Metall. Trans. A, 1988, vol. 19A, pp. 2433-42.
11. S. Nebti, D. Hamana, and G. Cizeron: Acta Metall. Mater., 1995, vol. 43 (9), pp. 3583-88.
12. R.C. Dorward: Metall. Trans. A, 1973, vol. 4, pp. 507-12.
13. M.H. Jacobs: Phil. Mag., 1972, vol. 8 (26), pp. 1-12.
14. T. Moons, P. Ratchev, P. De Smet, B. Verlinder, and P. van Houtte: Scripta Mater., 1996, vol. 35 (8), pp. 939-45.
15. C. Cayron and P.A. Buffat: Acta Mater., 2000, vol. 48 (10), pp. 2639-53.
16. S.D. Dumolt, D.E. Laughlin, and J.C. Williams: Scripta Mater., 1984, vol. 18 (12), pp. 1347-50.
17. M. Bournane, M. Nedjar, and A.F. Sirenko: Scripta Mater., 1999, vol. 40 (3), pp. 375-82.
18. I.J. Polmear: Light Alloys. Metallurgy of the Light Metals, Edward Arnold, London, 1981.
19. M. Furukawa, U. Utsunomiya, K. Matsubara, Z. Horita, and T.G. Langdon: Acta Mater., 2001, vol. 49 (18), pp. 3829-38.
20. M. Qian, J.A. Taylor, J.Y. Yao, M.J. Couper, and D.H. StJohn: J. Light Met., 2001, vol. 1 (3), pp. 187-93.
21. S.B. Kang, L. Zhen, H.W. Kim, and S.T. Lee: Mater. Sci. Forum, 1996, vols. 217-222, pp. 827-32.
22. M. Takeda, F. Ohkubo, T. Shirai, and K. Fukui: Mater. Sci. Forum, 1996, vols. 217-222, pp. 815-20.
23. G. Biroli, G. Caglioti, L. Martini, and G. Riontino: Scripta Mater., 1998, vol. 39 (2), pp. 197-203.
24. M. Murayama and K. Hono: Scripta Mater., 2001, vol. 44, pp. 701-06.
25. D.H. Xiao, J.N. Wang, D.Y. Ding, and H.L. Yang: J. Alloys Compounds, 2003, vol. 352, pp. 84-88.
26. C.E. Macchi, A. Somoza, A. Dupasquier, and I.J. Polmear: Acta Mater., 2003, vol. 51, pp. 5151-58.
27. K. Raviprasad, C.R. Hutchinson, T. Sakurai, and S.P. Ringer: Acta Mater., 2003, vol. 51, pp. 5037-50.
28. B.C. Lee and J.K. Park: Acta Mater., 1998, vol. 46, pp. 4181-87.
29. B.P. Huang and Z.Q. Zheng: Acta Mater., 1998, vol. 46, pp. 4381-93.
30. Bi-Ping Huang and Zi-Qiao Zheng: Scripta Mater., 1998, vol. 38, pp. 357-62.
31. K. Yu, W. Li, S. Li, and J. Zhao: Mater. Sci. Eng. A, 2004, vol. A368, pp. 88-93.
32. Z. Yin, Q. Pan, Y. Zhang, and F. Jiang: Mater. Sci. Eng. A, 2000, vol. A280, pp. 151-55.
33. M. Furukawa, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2002, vol. A332, pp. 97-109.
34. Z. Horita, T. Fujinami, and T.G. Langdon: Mater. Sci. Eng. A, 2001, vol. 318A, pp. 34-41.
35. M. Fuurukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng. A, 1998, vol. 257A, pp. 328-32.
36. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. 197A, pp. 157-64.
37. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1996, vol. 35, pp. 143-46.
38. P.J. Apps, J.R. Bowen, and P.B. Prangnell: Acta Mater., 2003, vol. 51 (10), pp. 2811-22.
39. W.Q. Cao, A. Godfrey, W. Liu, and Q. Liu: Mater. Lett., 2003, vol. 57 (24-25), pp. 3767-74.
40. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, United Kingdom, 1995.
41. F.J. Humphreys: Acta Metall., 1979, vol. 27 (12), pp. 1801-14.
42. M. Murayama, Z. Horita, and K. Hono: Acta Mater., 2001, vol. 49 (1), pp. 21-29.
43. N.Q. Chinh, J. Illy, Z. Kovàcs, Z. Horita, and T.G. Langdon: Mater. Sci. Forum, 2002, vols. 396-402, pp. 1007-12.
44. M. Fuurukawa, Z. Horita, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44 (11), pp. 4619-29.
45. Z. Horita, T. Fujinami, M. Nemoto, and T.G. Langdon: J. Mater. Proc. Technol., 2001, vol. 117 (3), pp. 288-92.
46. M. Cabibbo, E. Evangelista, V. Latini, E. Nes, and S. Tangen: Mater. Sci. Forum, 2003, vols. 426-432, pp. 2673-79.
47. V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C. Lowe, and R.Z. Valiev: Mater. Sci. Eng. A, 2003, vol. 343A, pp. 43-50.
48. R.Z. Valiev, A.V. Korznikov, and R.R. Mulyukov: Mater. Sci. Eng. A, 1993, vol. 168A, pp. 141-48.
49. J. Wang, Y. Iwahashi, Z. Horita, M. Furukawa, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Acta Mater., 1996, vol. 44 (7), pp. 2973-82.
50. J. Gilbert Kaufman: Properties of Aluminum Alloys - Tensile, Creep and Fatigue Data at High and Low Temperatures, ASM, Materials Park, OH, 1999.
51. J.W. Martin: Micromechanisms in Particle-Hardening Alloys, Cambridge Solid State Science Series, Cambridge, United Kingdom, 1980.
52. J.M. Dowling and J.W. Martin: Acta Metall., 1976, vol. 24, pp. 1147-53.