Cryogenic damage and fracture behaviors of G-11 woven glass-epoxy laminates

JSME International Journal, Series A: Solid Mechanics and Material Engineering

Volumn 48, Issue 2, 2005, Pages 91-99

  Sanada, Kazuaki ^a   Shindo, Yasuhide ^b  

^a TOYAMA PREFECTURAL UNIVERSITY   (Japan)

^b TOHOKU UNIVERSITY   (Japan)

Author keywords

Compact tension specimen; Composite material; Cryomechanics; Damage mechanics; Finite element method; Fracture criterion; Fracture mechanics; Fracture toughness; Material testing; Superconducting magnet

Indexed keywords

CRYOGENICS; DEFORMATION; EPOXY RESINS; FINITE ELEMENT METHOD; FRACTURE; GLASS; MATHEMATICAL MODELS; STRAIN;

COMPACT TENSION (CT); CRYOGENIC DAMAGE; FRACTURE BEHAVIORS; GLASS-EPOXY LAMINATES;

LAMINATES;

CRYOGENICS;

EID: 21244478155     PISSN: 13447912     EISSN: None     Source Type: Journal    
DOI: 10.1299/jsmea.48.91     Document Type: Article

References (31)

1. Kasen, M.B., MacDonald, G.R., Beekman, D.H., Jr. and Schramm, R.E., Mechanical, Electrical, and Thermal Characterization of G-10CR and G-11CR Glass-Cloth/Epoxy Laminates between Room Temperature and 4K, Adv. Cryog. Eng., Vol.26 (1980), pp.235-244.
2. Schutz, J.B., Properties of Composite Materials for Cryogenic Applications, Cryogenics, Vol.38 (1998), pp.3-12.
3. Timmerman, J.F., Tillman, M.S., Hayes, B.S. and Seferis, J.C., Matrix and Fiber Influence on the Cryogenic Microcracking of Carbon Fiber/Epoxy Composites, Composites: Part A, Vol.33 (2002), pp.323-329.
4. Bechel, V.T., Fredin, M.B., Donaldson, L., Kim, R.Y. and Camping, J.D., Effect of Stacking Sequence on Micro-Cracking in Cryogenically Cycled Carbon/Bismaleimide Composite, Composites: Part A, Vol.34 (2003), pp.663-672.
5. Kuhn, J.L. and Charalambides, P.G., Elastic Response of Porous Matrix Plain Weave Fabric Composites: Part I-Modeling, J. Compos. Mater., Vol.32, No.16 (1998), pp.1426-1471.
6. Shindo, Y., Sanada, K. and Horiguchi, K., Fracture Behavior of G-10 Woven Glass-Epoxy Laminates at Low Temperatures, Adv. Cryog. Eng., Vol.42 (A) (1996), pp.129-136.
7. Chang, K.Y., Liu, S. and Chang, F.K., Damage Tolerance of Laminated Composites Containing an Open Hole and Subjected to Tensile Loadings, J. Compos. Mater., Vol.25 (1991), pp.274-301.
8. Tan, S.C., A Progressive Failure Model for Composite Laminates Containing Openings, J. Compos. Mater., Vol.25 (1991), pp.556-577.
9. Shahid, I. and Chang, F.K., Modeling of Accumulated Damage and Failure of Multidirectional Composite Plates Subjected to In-Plane Loads, Composite Materials: Fatigue and Fracture-Fifth Volume, ASTM STP, Vol.1230 (1995), pp.186-214.
10. Ladeveze, P. and Lubineau, G., On a Damage Meso-model for Laminates: Micro-Meso Relationship, Possibilities and Limits, Compos. Sci. Tech., Vol.61 (2001), pp.2149-2158.
11. Zhong, X.A. and Knauss, W.G., Effects of Particle Interaction and Size Variation on Damage Evolution in Filled Elastomers, Mech. Compos. Mater. Struct., Vol.7 (2000), pp.35-53.
12. Jiang, Y., Tabiei, A. and Simitses, G.J., A Novel Micromechanics-Based Approach to the Derivation of Constitutive Equations for Local/Global Analysis of a Plain-Weave Fabric Composite, Compos. Sci. Tech., Vol.60 (2000), pp.1825-1833.
13. Dasgupta, A. and Agarwal, R.K., Orthotropic Thermal Conductivity of Plain-Weave Fabric Composites Using a Homogenization Technique, J. Compos. Mater., Vol.26, No.18 (1992), pp.2736-2758.
14. Dasgupta, A., Agarwal, R.K. and Bhaudarkar, S.M., Three-Dimensional Modeling of Woven-Fabric Composites for Effective Thermo-Mechanical and Thermal Properties, Compos. Sci. Tech., Vol.56 (1996), pp.209-223.
15. Kollegal, M.G. and Sridharan, S., Compressive Behavior of Plain Weave Lamina, J. Compos. Mater., Vol.32, No.15 (1998), pp.1334-1354.
16. Chapman, C.D. and Whitcomb, J.D., Thermally Induced Damage Initiation and Growth in Plain and Satin Weave Carbon-Carbon Composites, Mech. Compos. Mater. Struct., Vol.7 (2000), pp.177-194.
17. Zako, M., Uetsuji, Y. and Kurashiki, T., Finite Element Analysis of Damaged Woven Fabric Composite Materials, Compos. Sci. Tech., Vol.63 (2003), pp.507-516.
18. Standard Test Method for Measurement of Fracture Toughness, ASTM Designation E1820-01, Annual Book of ASTM Standards, American Society for Testing and Materials, Vol.03.01 (2002), pp.1031-1076.
19. Hahn, H.T. and Pandey, R., A Micromechanics Model for Thermoelastic Properties of Plain Weave Fabric Composites, ASME J. Eng. Mater. Tech., Vol.116 (1994), pp.517-523.
20. Shindo, Y., Wang, R., Horiguchi, K. and Ueda, S., Theoretical and Experimental Evaluation of Double-Notch Shear Strength of G-10CR Glass-Cloth/Epoxy Laminates at Cryogenic Temperatures, ASME J. Eng. Mater. Tech., Vol.121, No.3 (1999), pp.367-373.
21. Shindo, Y., Wang, R. and Horiguchi, K., Analytical and Experimental Studies of Short-Beam Interlaminar Shear Strength of G-10CR Glass-Cloth/ Epoxy Laminates at Cryogenic Temperatures, ASME J. Eng. Mater. Tech., Vol.123 (2001), pp.112-118.
22. Ueda, S. and Shindo, Y., Thermal Singular Stresses and Mechanical Properties in Cracked Glass-Fiber Reinforced Plastics at Low Temperatures, Theor. Appl. Mech., Vol.40 (1991), pp.249-257.
23. Hashin, Z., Theory of Fiber Reinforced Materials, NASA-CR-1974, NASA Langley Research Center, Hampton, VA, (1972).
24. JIS K7054-1987, Testing Method for Tensile Properties of Glass Fiber Reinforced Plastics, Japanese Standards Association, (1992).
25. JIS K7059-1987, Testing Method for In-Plane Shear Properties of Glass Fiber Reinforced Plastics, Japanese Standards Association, (1992).
26. Yamada, Y., Yoshimura, N. and Sakurai, T., Plastic Stress-Strain Matrix and Its Application for the Solution of Elastic-Plastic Problems by the Finite Element Method, Int. J. Mech. Sci., Vol.10 (1968), pp.343-354.
27. Kriz, R.D. and Muster, M.J., Materials Studies for Magnetic Fusion Energy Applications at Low Temperatures-VIII, NBSIR 85-3025, National Bureau of Standards, Boulder, Co, (1985), pp.49-86.
28. Hoffman, O., The Brittle Strength of Orthotropic Materials, J. Compos. Mater., Vol.1 (1967), pp.200-206.
29. JIS K6911-1979, Testing Methods for Thermosetting Plastics, Japanese Standards Association, (1992).
30. Sih, G.C., Paris, P.C. and Irwin, G.R., On Cracks in Rectilinearly Anisotropic Bodies, Int. J. Fract. Mech., Vol.1 (1965), pp.189-203.
31. Le-Ngoc, L. and McCallion, H., On the Fracture Toughness of Orthotropic Materials, Eng. Fract. Mech., Vol.58, No.4 (1997), pp.355-362.