A more complete description of the shear rheology of high-temperature, high-shear journal bearing lubrication

Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2004

Volumn , Issue PART A, 2004, Pages 429-437

  Bair, Scott ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

HTHS; Journal bearing; Non Newtonian; Rheology; Shear thinning

Indexed keywords

ELASTOHYDRODYNAMICS; HIGH TEMPERATURE EFFECTS; HYDROCARBONS; NEWTONIAN FLOW; POLYMERS; RHEOLOGY; SHEAR STRESS; VISCOMETERS;

HIGH TEMPERATURE, HIGH SHEAR (HTHS); JOURNAL BEARING; NON-NEWTONIAN; SHEAR THINNING;

LUBRICATION;

EID: 21244457261     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (32)

1. Smith, M.F., Jr., "History of ASTM Involvement in High-Temperature, High-Shear Oil Viscosity Research", in High-Temperature, High-Shear (HTHS) Oil Viscosity: Measurement and Relationship to Engine Operation, ASTM STP 1068, James A. Spearot, Ed., American Society for Testing and Materials, Philadelphia, 1989, pp. 3-13.
2. Demko, J.M., "Development of an ASTM Standard Test Method for Measuring Engine Oil Viscosity Using Capillary Viscometers at High-Temperature and High-Shear Rates", in High-Temperature, High-Shear (HTHS) Oil Viscosity: Measurement and Relationship to Engine Operation, ASTM STP 1068, James A. Spearot, Ed., American Society for Testing and Materials, Philadelphia, 1989, pp. 23-33.
3. American Society for Testing Materials, D4741, "Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer", 2001, pp. 1-5.
4. Spearot, J.A., "Relating High-Temperature, High-Shear-Rate Viscosity to Engine Operation", In High-Temperature, High-Shear (HTHS) Oil Viscosity: Measurement and Relationship to Engine Operation, ASTM STP 1068, James A. Spearot, Ed., American Society for Testing and Materials, Philadelphia, 1989, pp. 43-59.
5. Vickars, M.A. and Bates, T.W., "Co-ordinating European Council (CEC) Contribution to the Measurement of High-Temperature, High-Shear-Rate Viscosity and Its Relationship to Engine Operation", in High-Temperature, High-Shear (HTHS) Oil Viscosity: Measurement and Relationship to Engine Operation, ASTM STP 1068, James A. Spearot, Ed., American Society for Testing and Materials, Philadelphia, 1989, pp. 34-42.
6. Bair, S. and Qureshi, F., "Accurate Measurements of Pressure-Viscosity Behavior in Lubricants", STLE Tribology Transactions, Vol. 45, 2002, pp. 390-396.
7. Novak, J.D. and Winer, W.O., "The Effect of Pressure on the Non-Newtonian Behavior of Polymer Blended Petroleum Oils," ASME Journal of Lubrication Technology, Vol. 91, No. 3, 1969, pp. 459-463.
8. Pal, R., Sinhasan, R., and Singh, D.V., "Analysis of Big-End Bearing Having Non-Newtonian Fluids", STLE Tribology Transactions, Vol. 30, No. 2, 1987, pp. 296-302.
9. Fantino, B. and Bou-Said, B., "Inertia, Shear-Thinning and Thermal Effects on Connecting Rod Bearing Behaviour", Tribological Research and Design for Engineering Systems. Dowson, et al. (Editors), Elsevier, 2003, pp. 779-786.
10. Rastogi, A. and Gupta, R.K., "Accounting for Lubricant Shear-Thinning in the Design of Short Journal Bearings", Journal of Rheology, Vol. 35, No. 4, 1991, pp. 589-603.
11. Vijayaraghavan, D. and Brewe, D.E., "Effect of Rate of Viscosity Variation on the Performance of Journal Bearings", ASME Journal of Tribology, Vol. 120, No. 1, pp. 1-7.
12. Bair, S., "The High-Pressure, High-Shear Stress Rheology of a Polybutene", Journal of Non-Newtonian Fluid Mechanics, Vol. 97, 2001, pp. 53-65.
13. Bair, S., "The High-Pressure Rheology of Some Simple Model Hydrocarbons", Proc. Inst. Mech. Engrs., Vol. 216, Part J, 2002, pp. 139-149.
14. Schurz, J., Vollrath-Rodiger, M. and Krassig, H., "Rheologische Untersuchungen and Polyacrylnitril-Spinn losungen: Erweiterung des Viskosimeters HV6 fur hoher Temperaturen," Rheologica Acta, Vol. 20, 1981, pp. 569-578.
15. Yasuda, K., Armstrong, R.C. and Cohen, R.E., "Shear Flow Properties of Concentrated Solutions of Linear and Star Branched Polystyrenes", Rheologica Acta, Vol. 20, 1981, pp. 163-178.
16. Carreau, P.J., "Rheological Equations from Molecular Network Theories", Trans. Soc. Rheology, Vol. 16, No. 1, 1972, pp. 99-127.
17. Cross, M.M., "Rheology of Non-Newtonian Fluids, a New Flow Equation for Pseudoplastic Systems", J. Colloid Sci., Vol. 20, 1965, p. 417.
18. Escudier, M.P., Oliveira, P.J. and Pinho, F.T., "Fully Developed Laminar Flow of Purely Viscous non-Newtonian Liquids Through Annuli", Intern. J. Heat and Fluid Flow, Vol. 23, 2002, pp. 52-73.
19. Taylor, R.I., "The Inclusion of Lubricant Shear-Thinning in Journal Bearing Models", Lubrication at the Frontier, Dowson, et al. (Eds.), Elsevier, 1999, pp. 611-618.
20. Bair, S., "A Rough Shear-Thinning Correction for EHD Film Thickness", STLE Tribology Transactions, in press.
21. Bird, R.B., Armstrong, R.C. and Hassager, O., Dynamics of Polymeric Liquids, Vol. 1, Fluid Mechanics, Wiley, New York, 1987, pp. 228, 94.
22. Bair, S. and Qureshi, F., "The Generalized Newtonian Fluid Model and Elastohydrodynamic Film Thickness", ASME J. Tribology, Vol. 125, 2003, pp. 70-75.
23. Van Krevelen, D.W., Properties of Polymers: Their Correlation with Chemical Structure: Their Numerical Estimation and Prediction. Third Edition, Elsevier, Amsterdam, 1990, p. 477.
24. Bair, S. and Qureshi, F., "The High-Pressure Rheology of Polymer-Oil Solutions", Tribology Internation, Vol. 36, 2003, pp. 637-645.
25. Ferry, J.D., Viscoelastic Properties of Polymers, Wiley, New York, 1961, pp. 292-346.
26. nd Edition, Oxford, 2000, pp. 455, 471.
27. Bair, S. and Qureshi, F., "Ordinary Shear-Thinning and Its Effect Upon EHL Film Thickness", Tribological Research and Design for Engineering Systems, Dowson, et al. (Eds.), Elsevier, 2003, pp. 693-699.
28. Bair, S., "Elastohydrodynamic Film Forming with Shear Thinning Liquids", ASME J. Tribology, Vol. 120, 1998, pp. 173-178.
29. Cameron, A., Basic Lubrication Theory, Longman, London, 1970, pp. 71-90.
30. Bair, S. and Kottke, P., "Pressure-Viscosity Relationships for Elastohydrodynamics", STLE Tribology Transactions, Vol. 46, 2003, pp. 289-295.
31. Raimondi, A.A. and Boyd, J., "A Solution for the Finite Journal Bearing and Its Application to Analysis and Design, Part I, II, and III, Transactions ASLE, Vol. l, No. 1, 1958, pp. 159-209.
32. Larson, R.G., Constitutive Equations for Polymer Melts and Solutions, Butterworths, Boston, 1988, p. 26.