Review of agglomeration practice and fundamentals in heap leaching

Mineral Processing and Extractive Metallurgy Review

Volumn 26, Issue 3-4, 2005, Pages 233-294

  Bouffard, Sylvie C ^a  

^a Placer Dome Research Centre   (Canada)

Author keywords

Agglomeration; Copper; Fundamentals; Gold; Heap leaching; Practice

Indexed keywords

CEMENTS; COPPER; ELECTRIC CONDUCTIVITY; GOLD; LEACHING; METALS; SOLUTIONS; SULFURIC ACID;

AGITATION; FUNDAMENTALS; HEAP LEACHING; PRACTICE;

AGGLOMERATION;

EID: 20944451970     PISSN: 08827508     EISSN: None     Source Type: Journal    
DOI: 10.1080/08827500590944009     Document Type: Review

References (72)

1. Ahmadiantehrani, M., Hendrix, J. L., and Nelson, J. H., 1991, "Hypochlorite pretreatment of a low grade carbonaceous gold ore, Part II: Effects of agglomeration, temperature and bed height." In EPD Congress 1992, (J. P. Hager, Ed.), The Minerals, Metals & Materials Society, pp. 63-79.
2. Anonymous, November, 1992, "New Agglomeration aids help leaching." Engineering & Mining Journal, pp. 24-25.
3. Bouffard, S. C., 2003, "Understanding the heap biooxidation of sulfidic refractory gold ores," Ph.D. Thesis, The University of British Columbia, pp. 351.
4. Bouffard, S. C., 2004, Personal information acquired during visit.
5. Butwell, J. W., 1990, "Heap leaching of fine agglomerated tailings at Gooseberry Mine, Nevada." In Advances in Gold and Silver Processing, Ch. 1, pp. 3-13.
6. Canello, R. and Schnell, H. A., 1995, "Piloting of the bacterial leach process at Quebrada Blanca", Volume III, Electrorefining of Copper (W. C. Cooper, D. B. Dreisinger, J. E. Dutrizac, H. Hein, and G. Ugarte, Eds.), pp. 713-780.
7. Capes, C. E., 1980, Particle Size Enlargement, In Handbook of Powder Technology, 1, Elsevier, Amsterdam.
8. Chamberlin, P. D., 1980, "Heap leaching and pilot testing of gold and silver ores," Paper given at the Precious-Metals Symposium, Sparks, NV, November 17-19, 1980, Nevada Bureau of Mines, pp. 77-83.
9. Chamberlin, P. D., 1986, "Agglomeration: Cheap insurance for good recovery when heap leaching gold and silver ores." Mining Engineering, 38(12), pp. 1105-1109.
10. Cifuentes, R., 1999, "Heap leach agglomeration/percolation extraction aids for enhanced gold and silver recovery," WO 99/63123.
11. Cruz, A., Lastra, M., and Menacho, J., 1980, "Sulphuric acid leaching of copper silicate ores." Leaching and Recovering Copper from As-Mined Materials, American Institute of Mining, Metallurgical and Petroleum Engineers, NY, pp. 61-70.
12. DeMull, T. J. and Womakc, R. A., 1984, "Heap leaching practice at Alligator Ridge." In Au & Ag Heap and Dump Leaching Practice, Proceedings from the 1983 SME fall Meeting, Salt Lake City, UT, October 19-21, 1983, (J. B. Hiskey, Ed.), Sponsored by Solution Mining Committee, Mining and Exploration Division, Society of Mining Engineers of AIME, Ch. 2, pp. 9-21.
13. Efthymiou, M., Henderson, L., and Pyper, R., 1998, Practical Aspects of the Application of Extract-Ore® 9560 for Heap Leach Agglomeration at Nifty Copper Operation, Paper presented at ALTA 1998 Copper Hydrometallurgy Forum, ALTA Metallurgical Services, Brisbane, Australia, The world's knowledge, pp. 15.
14. Eisele, J. A. and Pool, D. L., 1987, "Agglomeration heap leaching of precious metals." CIM Bulletin, 80(902), pp. 31-34.
15. Farias, L. L, Reghezza, A. I., Cruz, A. R., Menacho, J. L., and Zivkovic, Y. D., 1995, "Acid leaching of copper ores," In Copper Hydrometallurgy Short Course, Copper 1995, (D. Dreisinger and J. D. Vasquez, Eds.), pp. 13-17.
16. Fernández, G. V., 2003, "The use of electrical conductivity in agglomeration and leaching," In Copper 2003 - Cobre 2003, (P. A. Riverso et al., Eds.), Vol. VI - Hydrometallurgy of Copper (Book 1), Canadian Institute of Mining, Metallurgy, and Petroleum, Montreal, Canada, pp. 161-175.
17. Garcia, A. J. and Jorgensen, M. K., 1997, "Agglomeration and heap leach testing requirements for high clay ores," Randol Gold Forum '97, Conference and Exhibition, May 18-21, 1997, Randol International Monterey, CA, pp. 143-146.
18. Gomes, J., 1983, "Heap leaching of gold ores," Fifth Annual Conference on Alaskan Placer Mining, Fairbanks, AK, pp. 80-83.
19. Gross, A. E., 1990, "Polymeric ore agglomeration aids," U.S. Patent 4,898,611.
20. Hall, J. S., 1986, "Sizing of particulate-water-air agglomerates using liquid nitrogen." Chemical Engineering Science, 41(1), pp. 187-188.
21. Heinen, H. J., McClelland, G. E., and Lindstrom, R. E., 1979, "Enhancing percolation rates in heap leaching of gold-silver ores," Report of Investigation 8388, Bureau of Mines: Reno, NV, pp. 20.
22. Herkenhoff, E. C., 1987, "Heap leaching: Agglomerate or deslime?" Engineering Mining Journal, 188(6), pp. 32-39.
23. Holle, H., 1996, "Process innovations at Girilambone Copper Company's heap leach/SX/EW operation, Randol at Vancouver '96," 5th Global Mining Opportunities and 2nd Annual Copper Hydromet Roundtable International Conference and Exhibition, November 12-15, 1996, Vancouver, BC, pp. 289-299.
24. James, B. and Lancaster, T., 1998, "Physical parameters of heap leaching at Girilambone Copper Company, Randol," Vancouver '98, Global Mining Opportunities, Copper Hydromet Roundtable '98, International Conference and Exhibition, Vancouver, BC, November 17-20, 1998, pp. 57-61.
25. Jenkins, J. and Canello, R., 1997, "Description of the El Abra plant, Randol" Vancouver '97, Global Mining Opportunities and Copper Hydromel Roundtable '97, International Conference and Exhibition, November 4-7, 1997, Vancouver, BC, pp. 183-187.
26. Kappes, D. W., 2002, "Precious metal heap leach design and practice," Proceedings of the Mineral Processing Plant Design, Practice, and Control, Littleton, CO, Society for Mining, Metallurgy, and Exploration, pp. 1606-1630.
27. Kerr, M., 1999, "Bioleach agglomeration aids," published in Conference Proceedings of Biomine'99 and Water Management in Metallurgical Operations, August 1999, Australian Mineral Foundation Inc.
28. Keuhey, K. Y. and Coughlin, W. E., 1983, "Getty Mining Company's approach to heap leaching at the Mercur Mine," Proceedings of Au & Ag Heap and Dump Leaching Practice at the 1983 SME Fall Meeting, Salt Lake City, UT, Ed. J. B. Hiskey, October 19-21, 1983, Ch. 6, pp. 51-57.
29. Kinard, D. T. and Schweizer, A. A., 1987, "Engineering properties of agglomerated ore in a heap leach pile." In Geotechnical Aspects of Heap Leach Design, (Dirk van Zyl, Ed.), Ch. 10, pp. 55-64.
30. Kohr, W. J., 1998, "Method of biotreatment for solid materials in a nonstirred surface bioreactor," U.S. patent 5,766,930.
31. Kosmatka, S. H., Kerkhoff, B., Panarese, W. C., MacLeod, N. F., and McGrath, R. J., 2002, Design and Control of Concrete Mixtures, Engineering Bulleting 101, 7th ed., Cement Association of Canada, pp. 356.
32. Lastra, M. R. and Chase, C. K., 1984, "Permeability, solution delivery, and solution recovery: Critical factors in dump and heap leaching of gold." Mining Engineering, 36(11), pp. 1537-1539.
33. LeHoux, P. L., 1997, Agglomeration Practice at Kennecott Barneys Canyon Mining Co, Global Exploitation of Heap Leachable Gold Deposits, (D. M. Hausen et al., Ed.), The Minerals, Metals & Materials Society, pp. 243-249.
34. Lipiec, A. I. and Bautista, R. G., 1998, "Considerations in the extraction of metal from heap leaches." Trans. Indian Inst. Met., 51(1), pp. 7-16.
35. Litz, J. E., 1993, "Hydrometallurgy: A review of 1992 activities," Mining Engineering, June, p. 609.
36. MacDonald, A. R. F., 1986, "Flocculation of acid leach slurries," U.S. Patent 4,587,108.
37. McClelland, G. E., 1986a, "Agglomerated and unagglomerated heap leaching behavior is compared in production heaps." Mining Engineering, 38(7), pp. 500-503.
38. McClelland, G. E., 1986b, "Heap leaching and agglomeration: Heap leaching practice in the United States," Proceedings of the International Conference on Gold, Vol. 2: Extractive Metallurgy of Gold, Johannesburg: SAIMM, pp. 57-69.
39. McClelland, G. E., Pool, D. L., and Eisele, J. A., 1983, "Agglomeration-heap leaching operations in the precious metals industry," U.S. Bureau of Mines, Reno, NV, IC 8945, pp. 16.
40. McClelland, G. E., Pool, D. L., Hunt, A. H., and Eisele, J. A., 1985, "Agglomeration and heap leaching of finely ground precious-metal-bearing tailings." Information Circular 9034, Bureau of Mines, pp. 11.
41. Miller, G., 2003, "Ore geotechnical effects on copper heap leach kinetics, Hydrometallurgy 2003." Fifth International Conference in Honour of Professor Ian Ritchie, Vol. 1: Leaching and Solution Purification, (C. A. Young et al., Ed.), The Minerals: Metals & Materials Society, pp. 329-342.
42. Milligan, D. A. and Engelhardt, P. R., 1983, "Agglomerated heap leaching at Anaconda's Darwin silver recovery project." Proceedings of the Au & Ag Heap and Dump Leaching Practice with Panel Discussion, 1983 SME Fall Meeting, Salt Lake City, UT, October 19-21, 1983, (J. B. Hiskey, Ed.), Sponsored by Solution Mining Committee, Mining and Exploration Division: Society of Mining Engineers of AIME, Ch. 4, pp. 29-39.
43. O'Brien, M. F., Griffin, J. B., Cuthbertson, W. F., Lamanna, J. R., and Wilton, L. E., 2003, "Operational changes at Phelps Dodge's Morenci Mine." Vol. VI - Hydrometallurgy of Copper (Book 1), Copper 2003-Cobre 2003, (P. A. Riveros et al., Ed.), Santiago, Chile, pp. 39-52.
44. O'Brien, R. T., 1982, "Agglomeration pre-treatment in the heap leaching of gold and silver." Seminar Carbon-In-Pulp Technology in the Extraction of Gold, Australasian Institute of Mining and Metallurgy, Symposia Series, pp. 297-311.
45. Outzen, R. L., 1983, "Heap leaching at the Borealis gold project." Practical Hydromet '83, Ch. 4, pp. 19-22.
46. Pautler, J. B., Gross, A. E. and Strominger, M. G., 1990, "New polymeric agglomeration aid improves heap leach efficiency at Brewer Gold." Advances in Gold and Silver Processing, (Maurice C. Fuerstenau and James L. Hendrix, Eds.), Ch. 2, pp. 15-21.
47. Perez, J. W., Barrois, M. J., McCord, T. H., and O'Neil, G. R., 1990, "Pretreatment/agglomeration as a vehicle for refractory gold ore treatment." U.S. Patent 4,961,777.
48. Perry's Chemical Engineering Handbook, "Size enlargement equipment and practice." 7th ed. (R. H. Perry, D. W. Green, and J. O. Maloney, Eds.), New York: McGraw-Hill, pp. 2057-2089.
49. Phifer, S. E., 1988, "Agglomerating gold ores at the Haile gold mine." Mining Engineering, June, pp. 447-450.
50. Pietsch, W., 1985, "Agglomeration, fortschritte der verfahrenstechnik." Abt. B, Mechanische Verfahrenstechnik (Section B, Mechanical process technology). Düsseldorf, Germany, VDI-Verlag, vol. 23, pp. 125-139.
51. Pino, F., 1995, "Division Salvador of Codelco Chile introduces the LX/SX/EW process as a new line of production." Copper 95-Electrorefining and Hydrometallurgy of Copper (W. C. Cooper, D. B. Dreisinger, J. E. Hein, G. Ugarte, Eds.), Volume III, pp. 713-725.
52. Pizzaro, R. S., Pato, V. V., and Ricafort, L. R., 1986, "Gold heap leaching operations, Masbate, Philippines." Gold 100, Proceedings of the International Conference on Gold, Vol. 2: Extractive Metallurgy of Gold, Johannesburg: South Africa, SAIMM, pp. 71-81.
53. Polizzotti, D. M., 1993, "Agglomerating agents for clay containing ores." U.S. Patent 5,211,920.
54. Polizzotti, D. M., Liao, W. P., and Roe, D. C., 1996, "Cationic graft polymer agglomeration agents for mineral bearing ores." U.S. Patent 5,512,636.
55. Polizzotti, D. M., Liao, W. P., and Roe, D. C., 1997, "Cationic block polymer agglomeration agents for mineral bearing ores." U.S. Patent 5,668,219.
56. Polizzotti, D. M., Rice, D. A., and Rak, R., 1999, "Polymeric agglomerating agents for the gold mining industry." Polymers in Mineral Processing Industry, (J. S. Laskowski, Ed.), pp. 455-462.
57. Potter, G. M., 1983, "Some factors in the design of heap leaching operations." Nevada Bureau of Mines & Geology, Report 36, Paper given at the Precious Metals Symposium, Sparks, NV, November 17-19, 1980, (V. E. Kral et al., Eds.), pp. 69-76.
58. Readett, D., Sylwestrzak, L., Franzmann, P. D., Plumb, J. J., Robertson, W. R., Gibson, J. A. E., and Watling, H., 2003, "The life cycle of a chalcocite heap bioleach system." Hydrometallurgy 2003-Fifth International Conference in Honor of Professor Ian Ritchie, Vol. 1: Leaching and Solution Purification, (C. A. Young et al., Eds.), TMS (The Minerals, Metals & Materials Society), pp. 365-374.
59. Rose, W. R., Pyper, R., Eguivar, J., and Mirabal, C., 1990, "Heap leaching with fine grinding and agglomeration at Potosi - Bolivia." Ch. 3, Proceedings of the Symposium at GOLDTech 4, (M. C. Fuerstenau and J. L. Hendrix, Eds.), pp. 23-32.
60. Scheffel, R. E., 1982, "Retreatment and stabilization of the Naturita tailing pile using heap leaching techniques." Interfacing Technologies in Solution Mining: Proceedings of the 2nd SME-SPE International Solution Mining Symposium, AIME, New York, Ch. 27, pp. 311-321.
61. Scheffel, R. E., 2002, "Copper heap leach design and practice." Proceedings of the Mineral Processing Plant Design, Practice, and Control, Littleton, CO, Society for Mining, Metallurgy, and Exploration, pp. 1571-1605.
62. Schnell, H. A., 1997, "Leach practice at Quebrada Blanca, Randol," Vancouver '97, Global Mining Opportunities and Copper Hydromel Roundtable '97, International Conference and Exhibition, November 4-7, 1997, Vancouver: BC, pp. 319-321.
63. Serrano, E. M., 2003, "New agglomeration techniques for the acid percolation leaching of clay-bearing copper ores." Vol. VI - Hydrometallurgy of Copper (Book 1), Copper 2003 - Cobre 2003, (P. A. Riveros et al., Eds.), Santiago, Chile, pp. 189-201.
64. Strachan, C. I. and van Zyl, D., 1987, "Feasibility assessment for increasing heap thicknesses at the Alligator Ridge Mine." Geotechnical Aspects of Heap Leach Design, (D. van Zyl, Ed.), Ch. 11, pp. 65-76.
65. Tibbals, R. L., 1987, "Agglomeration practice in the treatment of precious metal ores." Proceedings of the International Symposium on Gold Metallurgy, Winnipeg, Canada, August 23-26, 1987. New York: Pergamon, pp. 77-86.
66. Trincado, L., Troncoso, U., Vargas, C., Bunger, C., and Zárate, G., 2003, "Process improvements at Mantoverde heapleach-SX-EW plant." Hydrometallurgy 2003 - Fifth International Conference in Honor of Professor Ian Ritchie, Vol. 1: Leaching and Solution Purification, (C. A. Young, A. M. Alfantazi, C. G. Anderson, D. B. Dreisinger, B. Harris, and A. James, Eds.), TMS (The Minerals, Metals & Materials Society), pp. 343-349.
67. Uhrie, J. L. and Koons, G. J., 2001, "The evaluation of deeply ripping truckdumped copper leach stockpiles." Mining Engineering, 53(12), pp. 54-56.
68. Uhrie, J. L., Wilton, L. E., Rood, E. A., Parker, D. B., Griffin, J. B., and Lamanna, J. R., 2003, "The metallurgical development of the Morenci MFL project." Vol. VI - Hydrometallurgy of Copper (Book I), Copper 2003 - Cobre 2003, (P. A. Riveros et al., Eds.), Santiago, Chile, pp. 29-37.
69. Videau, G. and Roche, M., 1990, "Developpement industriel d'un nouveau procede d'agglomeration de mineral uranifere par boulettage avant traitement par lixiviation en tas (voie acide): Application au mineral tres argileux de Nord-Aquitaine, Industrie Minérale Mines et Carrières." Les Techniques, March-April (2-3). pp. 135-142.
70. Walker Jr., D. D. and Oliphant, J., 1992, "Composition and method for agglomerating ore." U.S. Patent 5,116,417.
71. Worstell, J. H., 1987, "Guide to successful precious metal heap leaching." Paper presented at the African Mining Conference, Institute of Mining and Metallurgy, pp. 425-436.
72. Zárate, G. E. and Guzmán, J. C., 1987, "Gold tailings processing by heap leaching." Ch. 24, Small Mines Development in Precious Metals, Littleton, CO: Society of Mining Engin., pp. 151-156.