Advances in probabilistic design: Manufacturing knowledge and applications

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 215, Issue 3, 2001, Pages 297-313

  Swift, K G ^a   Raines, M ^a   Booker, J D ^b  

^a UNIVERSITY OF HULL   (United Kingdom)

^b UNIVERSITY OF BRISTOL   (United Kingdom)

Author keywords

Design and service dependent variables; Failure mode and effects analysis; Probabilistic design; Reliability prediction; Reliability targets; Stress strength interference analysis

Indexed keywords

EID: 20844459202     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/0954405011515389     Document Type: Article

References (60)

1. An industrial competitiveness policy for the European Union. Communication from the Commission to the Council to the European Parliament, Economic and Social Committee and the Committee of Regions, Brussels, November 1994.
2. Kehoe, D. F. The Fundamentals of Quality Management, 1996 (Chapman and Hall, London).
3. Carter, A. D. S. Mechanical Reliability and Design, 1997 (Macmillan, London).
4. Stephenson, J. A. and Wallace, K. M. Design for reliability of mechanisms. In Design for X - Concurrent Engineering Imperatives (Ed. G. Q. Huang), 1996 (Chapman and Hall, London).
5. Leitch, R. D. Reliability Analysis for Engineers - An Introduction, 1995 (Oxford University Press, Oxford).
6. Cullen, J. M. Managing the new product introduction process for quality, reliability, cost and speed. In IMechE International Conference on Design Competitive Advantage - Making the Most of Design, Coventry, 23-24 March 1994, paper C482 (Mechanical Engineering Publications, London).
7. Carter, A. D. S. Mechanical Reliability, 2nd edition, 1986 (Macmillan, London).
8. Rice, R. C. Statistical aspects of design. In ASM Handbook No. 20 - Materials Selection and Design, 10th edition, 1997 (ASM International, Ohio).
9. Weber, M. A. and Penny, R. K. Probabilistic stress analysis methods. ASME Proc. Reliability, Stress Analysis and Failure Prev., 1991, DE-Vol. 30, 21-27.
10. Bury, K. V. Statistical Models in Applied Science, 1975 (John Wiley, New York).
11. Sundararajan, C. and Witt, F. J. Stress-strength interference method. In Probabilistic Structural Mechanics Handbook: Theory and Industrial Applications (Ed. C. Sundararajan), 1995 (Chapman and Hall, New York).
12. Sadlon, R. J. Mechanical Applications in Reliability Engineering, 1993 (RAC, Griffiss AFB, New York).
13. Dasgupta, A. and Pecht, M. Material failure mechanisms and damage models. IEEE Trans. Reliability, 1991, 40(5), 531-536.
14. Haugen, E. B. Probabilistic Mechanical Design, 1980 (Wiley-Interscience, New York).
15. Welling, M. and Lynch, J. Probabilistic design techniques applied to mechanical elements. Naval Engrs J., May 1985, 116-123.
16. Haugen, E. B. and Wirsching, P. H. Probabilistic design: a realistic look at risk and reliability in engineering. Mach. Des., 15 May 1975, 80-85.
17. Mischke, C. R. Fitting Weibull strength data and applying it to stochastic mechanical design. J. Mech. Des., March 1992, 114, 35-41.
18. Smith Jr, H. Applications in aircraft structures. In Probabilistic Structural Mechanics Handbook: Theory and Industrial Applications (Ed. C. Sundararajan), 1995 (Chapman and Hall, New York).
19. Ireson, G. W., Coombs Jr, C. F. and Moss, R. Y. Handbook of Reliability Engineering and Management, 2nd edition, 1996 (McGraw-Hill, New York).
20. ASM Handbook No. 1 - Properties and Selection: Irons, Steels and High Performance Alloys, 10th edition, 1997 (ASM International, Ohio).
21. ASM Handbook No. 2 - Properties and Selection: Non-ferrous Alloys and Special Purpose Materials, 10th edition, 1997 (ASM International, Ohio).
22. Cable, C. W. and Virene, E. P. Structural reliability with normally distributed static and dynamic loads and strength. In Proceedings of Annual Symposium on Reliability, 1967, pp. 329-336.
23. Shigley, J. E. and Mischke, C. R. (Eds) Standard Handbook of Machine Design, 2nd edition, 1996 (McGraw-Hill, New York).
24. Heyes, P. F. HSE experience of failure in weldments. In Institute of Metals Seminar on Failure of Weldments, London, April 1989.
25. Chandra, U. Control of residual stresses. In ASM Handbook No. 20 - Materials Selection and Design, 10th edition, 1997 (ASM International, Ohio).
26. Lipson, C. and Sheth, N. J. Statistical Design and Analysis of Engineering Experiments, 1973 (McGraw-Hill, New York).
27. Rao, S. S. Reliability Based Design, 1992 (McGraw-Hill, New York).
28. Pilkey, W. D. Stress Concentration Factors, 2nd edition, 1997 (John Wiley, New York).
29. Evans D. H. Statistical tolerancing: the state of the art, Part III. Shifts and drifts. J. Qual. Technol., 1975, 7(2), 72-76.
30. Smith, D. J. Reliability, Maintainability and Risk: Practical Methods for Engineers, 4th edition, 1993 (Butterworth-Heinemann, Oxford).
31. Kotz, S. and Lovelace, C. R. Process Capability Indices in Theory and Practice, 1998 (Arnold, London).
32. Battin, L. Six sigma process by design - design and dimensions. Group Mech. Technol., 1988, 1(1), 4 (Government Electronics Group, Motorola Inc., Scottsdale, Arizona).
33. Swift, K. G., Raines, M. and Booker, J. D. Design capability and the costs of failure. Proc. Instn Mech. Engrs, Part B, Journal of Engineering Manufacture, 1997, 211(B5), 409-423.
34. Swift, K. G., Raines, M. and Booker, J. D. Analysis of product capability at the design stage. J. Engng Des., 1999, 10(1), 77-91.
35. Swift, K. G., Raines, M. and Booker, J. D. Tolerance optimisation in assembly stacks based on capable design. Proc. Instn Mech. Engrs, Part B, Journal of Engineering Manufacture, 1999, 213(B7), 677-693.
36. Murty, A. S. R. and Naikan, V. N. A. Machinery selection - process capability and product reliability dependence. Int. J. Qual, and Reliability Managmt, 1997, 14(4), 381-390.
37. Ullman, D. G. The Mechanical Design Process, 1992 (McGraw-Hill, New York).
38. Norton, R. L. Machine Design: An Integrated Approach, 1996 (Prentice-Hall, Englewood Cliffs, New Jersey).
39. Davies, G. J. Performance in Service: Essential Metallurgy for Engineers, 1985 (Van Nostrand Reinhold, London).
40. Larsson, L. E., Jönsson, L. and Malm, S. Maskinskador - orsaker och economisk betydelse (in Swedish). Verskstaderna, April 1971.
41. Nicholson, C. E., Heyes, P. F. and Wilson, C. Common lessons to be learned from the investigations of failures in a broad range of industries. In Structural Failure, Product Liability and Technical Insurance (Ed. H. P. Rossmanith), 1993 (Elsevier, London).
42. Bury, K. V. On probabilistic design. J. Engng for Industry, November 1974, 1291-1295.
43. Ellingwood, B. and Galambos, T. V. General specifications for structural design loads. In Probabilistic Methods in Structural Engineering (Eds M. Shinozuka and J. Yao), 1984 (ASCE, New York).
44. Faires, V. M. Design of Machine Elements, 4th edition, 1965 (Macmillan, New York).
45. Lincoln, B., Gomes, K. J. and Braden, J. F. Mechanical Fastening of Plastics: An Engineering Handbook, 1984 (Marcel Dekker, New York).
46. Woodson, W. E., Tillman, B. and Tillman, P. Human Factors Design Handbook, 1992 (McGraw-Hill, New York).
47. Dieter, G. E. Engineering Design: A Materials and Processing Approach, 1st metric edition, 1986 (McGraw-Hill, New York).
48. Vrijling, J. K., van Hengel, W. and Houben, R. J. Acceptable risk as a basis for design. Reliability Engng and Syst. Safety, 1998, 59, 141-150.
49. Karmiol, E. D. Reliability apportionment. Preliminary Report EIAM-5, Task II, General Electric, Schenectady, New York, 8 April 1965, pp. 10-22.
50. Bracha, V. J. The methods of reliability engineering. Mach. Des., July 1964, 70-76.
51. Niehaus, F. Prospects for use of probabilistic safety criteria. In Structural Mechanics in Reactor Technology (Ed. F. H. Wittman), 1987 (Balkema, Rotterdam).
52. Ditlevsen, O. Structural reliability codes for probabilistic design. Structural Safety, 1997, 19(3), 253-270.
53. Fragola, J. R. Reliability and risk analysis data base development: an historical perspective. Reliability Engng and Syst. Safety, 1996, 51, 125-136.
54. Smith, C. O. Reliability in design. In ASM Handbook No. 20 - Materials Selection and Design, 10th edition, 1997 (ASM International, Ohio).
55. Siddal, J. N. Probabilistic Engineering Design: Principles and Applications, 1983 (Marcel Dekker, New York).
56. BS 970: Part 3: 1991 Specification for Wrought Steels for Mechanical and Allied Engineering Purposes, 1991 (British Standards Institution, London).
57. Edwards, K. S. and McKee, R. B. Fundamentals of Mechanical Component Design, 1991 (McGraw-Hill, New York).
58. Marbacher, B. Metric fasteners. In Handbook of Bolts and Bolted Joints (Eds J. H. Bickford and S. Nassar), 1999 (Marcel Dekker, New York).
59. Shigley, J. E. Mechanical Engineering Design, 1st metric edition, 1986 (McGraw-Hill, New York).
60. Booker, J. D., Raines, M. and Swift, K. G. Designing Capable and Reliable Products, 2001 (Butterworth-Heinemann, London).