Effects of nano- And micro-fillers and processing parameters on injection-molded microcellular composites

Polymer Engineering and Science

Volumn 45, Issue 6, 2005, Pages 773-788

  Yuan, Mingjun ^a   Winardi, Andreas ^a   Gong, Shaoqin ^a   Turng, Lih Sheng ^a  

^a University of Wisconsin Madison   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

FILLERS; INJECTION MOLDING; POLYAMIDES; POLYMETHYL METHACRYLATES; RESINS; RUBBER; TENSILE STRENGTH; TOUGHNESS;

CORE-SHELL RUBBER (CSR); MICRO-FILLERS; MICROCELLULAR COMPOSITES; PROCESSING PARAMETERS;

COMPOSITE MATERIALS;

EID: 20844451130     PISSN: 00323888     EISSN: None     Source Type: Journal    
DOI: 10.1002/pen.20327     Document Type: Article

References (53)

1. E.P. Giannelis, Appl. Organometal Chem., 12, 675 (1998).
2. S.S. Ray and M. Okamoto, Polymer, 28, 1539 (2003).
3. N.P. Suh, "Microcellular Plastics," in Innovation in Polymer Processing Molding, J.F. Stevenson, ed., Hanser Publishers, Munich, 93 (1996).
4. S.K. Geol and E.J. Beckman, Polym. Eng. Sci., 34, 1137 (1994).
5. P.A. Waldman, "The Processing of Microcellular Foam," MS thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA (1982).
6. D.F. Baldwin and N.P. Suh, SPE ANTEC Tech. Papers, 38, 1503 (1992).
7. K.A. Seeler and V. Kumar, ASME Cell. Polym., 38, 93 (1992).
8. K.A. Seeler and V. Kumar, J. Reinf. Plast. Compos., 12, 359 (1993).
9. V. Kumar, SPE ANTEC Tech. Papers, 60, 1892 (2002).
10. M. Yuan, L. Turng, S. Gong, D. Caulfield, C. Hunt, and R. Spindler, Polym. Eng. Sci., 44, 673 (2004).
11. K.P. Pramoda, T.X. Liu, Z.H. Liu, C.B. He, and H. Sue, Abst. Papers, 224th ACS Natl. Mtg., Boston, 155 (2002).
12. H. Lee, A. Hsieh, and G. McKinley, Abst. Papers, 224th ACS Natl. Mtg., Boston, 240 (2002).
13. M. Krook, A. Albertsson, W.W. Gedde, and M.S. Hedenqvist, Polym. Eng. Sci., 42, 1238 (2002).
14. S. Kenig, A. Ophir, O. Shepelev, and F. Weiner, SPE ANTEC Tech. Papers, 60, 794 (2002).
15. X. Liu and Q. Wu, Macromol. Mater. Eng., 287, 180 (2002).
16. H. Wang, C. Zeng, M. Elkovitch, L.J. Lee, and K.W. Koelling, Polym. Eng. Sci., 41, 2036 (2001).
17. S. Wong and L. Chen, SPE ANTEC Tech. Papers, 60, 1466 (2002).
18. K. Xiao and L. Ye, Polym. Eng. Sci., 40, 70 (2000).
19. M.C.M. van der Sanden and H.E.H. Meijer, Polymer, 34, 5063 (1993).
20. P.A. Lovell, J. McDonald, D.E.J. Saunders, and R.J. Young, Polymer, 34, 61 (1993).
21. B.H. Nguyen-Thuc and A. Maazouz, Polym. Eng. Sci., 42, 120 (2002).
22. K. Lin and F. Chang, Polym. Networks Blends, 4, 51 (1994).
23. J.N. Sultan and R.C. McGarry, Polym. Eng. Sci., 13, 29 (1973).
24. A.F. Yee and R.A. Pearson, J. Mater. Sci., 21, 2462 (1986).
25. R.A. Pearson and A.F. Yee, J. Mater. Sci., 26, 3828 (1991).
26. C.K. Riew, E.H. Rowe, and A.R. Siebert, ACS Adv. Chem. Ser., 154, 326 (1976).
27. W.D. Bascom, R.Y. Ting, R.J. Moulton, C.K. Riew, and A.R. Siebert, J. Mater. Sci., 16, 2657 (1981).
28. D. Dompas and G. Groeninckx, Polymer, 35, 4734 (1994).
29. M.D. Elkovitch, L.J. Lee, and D.L. Tomasko, Polym. Eng. Sci., 41, 2108 (2001).
30. X. Han, C. Zeng, L.J. Lee, K.W. Koelling, and D.L. Tomasko, SPE ANTEC Tech. Papers, 60, 1910 (2002).
31. C. Zeng, X. Han, L.J. Lee, K.W. Koelling, and D.L. Tomasko, SPE ANTEC Tech. Papers, 60, 1504 (2002).
32. P. Maiti, P.H. Nam, M. Okamoto, T. Kotaka, N. Hasegawa, and A. Usuki, Polym. Eng. Sci., 42, 1907 (2002).
33. J.S. Colton and N.P. Suh, Polym. Eng. Sci., 27, 485 (1987).
34. J.S. Colton and N.P. Suh, Polym. Eng. Sci., 27, 493 (1987).
35. D.F. Baldwin, C.B. Park, and N.P. Suh, Polym. Engr. Sci., 36, 1437 (1996).
36. D.F. Baldwin, C.B. Park, and N.P. Suh, Polym. Engr. Sci., 36, 1446 (1996).
37. L. Chen, H. Sheth, and R. Kim, Polym. Eng. Sci., 41, 990 (2001).
38. N.S. Ramesh, D.H. Rasmussen, and G.A. Campbell, Polym. Eng. Sci., 34, 1685 (1994).
39. N.S. Ramesh, D.H. Rasmussen, and G.A. Campbell, Polym. Eng. Sci., 34, 1698 (1994).
40. L. Chen, X. Wang, R. Straff, and K. Blizard, Polym. Eng. Sci., 42, 1151 (2002).
41. X. Xu, C.B. Park, D. Xu, and R. Pop-Iliev, Polym. Eng. Sci., 43, 1378 (2003).
42. K.Y. Kim, S.L. Kang, and H.-Y. Kwak, Polym. Eng. Sci., 44, 1890 (2004).
43. H. Sheth and L. Chen, SPE ANTEC Tech. Papers, 58, 1852 (2000).
44. L. Chen, R. Straff, and X. Wang, SPE ANTEC Tech. Papers, 59, 1732 (2001).
45. H. Kharbas, P. Nelson, M. Yuan, S. Gong, L. Turng, and R. Spindler, Polym. Compos., 24, 655 (2003).
46. D.F. Baldwin, C.B. Park, and N.P. Suh, Polym. Eng. Sci., 38, 674 (1998).
47. N.S. Ramesh and N. Maltwiz, SPE ANTEC Tech. Papers, 44, 1907 (1998).
48. C.B. Park, A.H. Behravesh, and R.D. Venter, Polym. Eng. Sci., 38, 1812 (1998).
49. A. Osorio and L. Turng, Polym. Eng. Sci., 44, 2274 (2004).
50. N.S. Ramesh, "Chapter 5: Foam Growth in Polymers," in Foam Extrusion Principles and Practices, S.T. Lee, ed., Technomic Publishing Company, Lancaster, 125 (2000).
51. M. Amon and C.D. Denson, Polym. Eng. Sci., 24, 1026 (1984).
52. M. Amon and C.D. Denson, Polym. Eng. Sci., 26, 255 (1986).
53. S. Doroudian, C.B. Park, and M.T. Kortschot, Polym. Eng. Sci., 36, 2645 (1996).