High-density polyethylene/cycloolefin copolymer blends. Part 1: Phase structure, dynamic mechanical, tensile, and impact properties

Polymer Engineering and Science

Volumn 45, Issue 6, 2005, Pages 817-826

  Kolarik J ^a   Krulis Z ^a   Slouf M ^a   Fambri, L ^b  

^a INSTITUTE OF MACROMOLECULAR CHEMISTRY   (Czech Republic)

^b UNIVERSITY OF TRENTO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BRITTLENESS; COPOLYMERS; DENSITY (SPECIFIC GRAVITY); FRACTURE TOUGHNESS; HIGH DENSITY POLYETHYLENES; MATHEMATICAL MODELS; STIFFNESS; TENSILE STRENGTH; YIELD STRESS;

CYCLOOLEFIN COPOLYMERS (COC); IMPACT PROPERTIES; PHASE CONTINUITY; PHASE STRUCTURE;

POLYMER BLENDS;

EID: 20844450690     PISSN: 00323888     EISSN: None     Source Type: Journal    
DOI: 10.1002/pen.20337     Document Type: Article

References (54)

1. L.A. Utracki, Polymer Alloys and Blends, Hanser, Munich (1990).
2. M.J. Folkes and P.S. Hope, Polymer Blends and Alloys, Chapman & Hall, Cambridge (1993).
3. L.H. Sperling, Polymeric Multicomponent Materials, Wiley, New York (1997).
4. L.A. Utracki, Commercial Polymer Blends, Chapman & Hall, London (1988).
5. D.R. Paul and C.B. Bucknall, eds., Polymer Blends, Wiley, New York (1999).
6. D. McNally, in Encyclopedia of Polymer Science and Technology, Vol. 2, 3rd ed., H.F. Mark, ed., Wiley, Hoboken, NJ, 489 (2003).
7. K. Thorshaug, R. Mendichi, L. Boggioni, I. Tritto, S. Trinkle, C. Friedrich, and R. Muelhaupt, Macromolecules, 35, 2903 (2002).
8. L. Tritto, L. Boggioni, J.C. Jansen, K. Thorshaug, M.C. Sacchi, and D.R. Ferro, Macromolecules, 35, 616 (2002).
9. G. Khanarian, Polym. Eng. Sci., 40, 2590 (2000).
10. W.J. Huang, F.C. Chang, and P.P.J. Chu, Polymer, 41, 6095 (2000).
11. P.P.J. Chu, W.J. Huang, and F.C. Chang, Polymer, 42, 2185 (2001).
12. T. Scrivani, R. Benavente, E. Perez, and J.M. Perena, Macromol. Chem. Phys., 202, 2547 (2001).
13. J. Forsyth, J.M. Perena, R. Benavente, E. Perez, I. Tritto, L. Boggioni, and H.H. Brintzinnger, Macromol. Chem. Phys., 202, 614 (2001).
14. J.F. Forsyth, T. Scrivani, R. Benavente, C. Marestin, and J.M. Perena, J. Appl. Polym. Sci., 82, 2159 (2001).
15. D. Rana, C.H. Lee, K. Cho, B.H. Lee, and S. Choe, J. Appl. Polym. Sci., 69, 2441 (1998).
16. J. Luettmer-Strathmann and J.E.G. Lipson, Macromolecules, 32, 1093 (1999).
17. A. Pegoretti, J. Kolařík, L. Fambri, and A. Penati, Polymer, 44, 3381 (2003).
18. J. Kolařík, A. Pegoretti, L. Fambri, and A. Penati, Macromol. Mater. Eng., 288, 629 (2003).
19. M. Slouf, J. Kolařík, and L. Fambri, J. Appl. Polym. Sci., 91, 253 (2004).
20. T. Matsuoka and S. Yamamoto, J. Appl. Polym. Sci., 68, 807 (1998).
21. R.C. Willemse, A.P. de Boer, J. Van Dam, and A.D. Gotsis, Polymer, 39, 5879 (1998).
22. R.C. Willemse, Polymer, 40, 2175 (1999).
23. H. Veenstra, J. Van Dam, and A.P. De Boer, Polymer, 40, 1190 (1999).
24. H. Veenstra, P.C.J. Verkooijen, B.B.J. van Lent, J. Van Dam, A.P. De Boer, and H.J. Nijhof, Polymer, 41, 1817 (2000).
25. L.E. Nelsen and R.F. Landel, Mechanical Properties of Polymers and Composites, Marcel Dekker, New York (1994).
26. J. Lyngaae-Jorgensen, A. Kuta, K. Sondergaard, and K.V. Poulsen, Polym. Networks, 3, 1 (1993).
27. J. Kolařík and G. Geuskens, Polym. Networks Blends, 7, 13 (1997).
28. H. Veenstra, J. van Dam, and A.P. de Boer, Polymer, 40, 1119 (1999).
29. J. Kolařík, L. Fambri, A. Pegoretti, A. Penati, Polym. Eng. Sci., 40, 127 (2000).
30. J. Lyngaae-Jorgensen, K.L. Rasmussen, E.A. Chtcherbakova, and L.A. Utracki, Polym. Eng. Sci., 39, 1060 (1999).
31. J. Lyngaae-Jorgensen and L.A. Utracki, Polymer, 44, 1661 (2003).
32. J. Kolařík, A. Pegoretti, L. Fambri, and A. Penati, J. Polym. Res., 7, 1 (2000).
33. J. Kolařík, Eur. Polym. J., 34, 585 (1998).
34. J. Kolařík, J. Macromol. Sci., Phys., 39, 53 (2000).
35. J. Kolařík, L. Fambri, A. Pegoretti, and A. Penati, Polym. Adv. Technol., 11, 75 (2000).
36. J. Kolařík, L. Fambri, A. Pegoretti, A. Penati, and P. Goberti, Polym. Eng. Sci., 42, 161 (2002).
37. G.M. Brown and J.H. Butler, Polymer, 38, 3937 (1997).
38. B. Wunderlich and G. Czornyj, Macromolecules, 10, 906 (1977).
39. P.G. De Gennes, J. Phys. Lett. (Paris), 37, L1 (1976).
40. J. Sax and J.M. Ottino, Polym. Eng. Sci., 23, 165 (1983).
41. W.Y. Hsu and S. Wu, Polym. Eng. Sci., 33, 293 (1993).
42. R.M. Christensen, Mechanics of Composite Materials, Wiley, New York (1979).
43. J. Kolařík, Polym. Eng. Sci., 36, 2518 (1996).
44. P.G. Fox and K.N.G. Fuller, Nat. Phys. Sci., 234, 13 (1971).
45. M. Shibata, R. Yosomiya, Z. Jiang, Z. Yang, G. Wang, R. Ma, and Z. Wu, J. Appl. Polym. Sci., 74, 1686 (1999).
46. L. Minkova, H. Yordanov, and S. Filippi, Polymer, 43, 6195 (2002).
47. G. Guerra, C. De Rosa, V.M. Vitagliano, V. Petraccone, P. Corradini, J. Polym. Sci. B: Polym. Phys., 29, 265 (1991).
48. J. Kolařík, L. Fambri, M. Šlouf, and D. Konečný, J. Appl. Polym. Sci., in press.
49. Y.P. Khanna, E.A. Tun, T.J. Taylor, V.V. Vickroy, and R. F. Abbott, Macromolecules, 18, 1302 (1985).
50. P. Starck, Eur. Polym. J., 33, 339 (1997).
51. H. Sha, X. Zhang, and I.R. Harrison, Thermochimica Acta, 192, 233 (1991).
52. E. Benham and M. Me Daniel, in Encyclopedia of Polymer Science and Technology, Vol. 2, 3rd ed., H.F. Mark, ed., Wiley, Hoboken, NJ, 392 (2003).
53. Topas (COC), brochure from Ticona, Hoechst, Germany (1995).
54. G. Khanarian, Polym. Eng. Sci., 40, 2590 (2000).