Effect of a hard artificial asperity on the crack closure behavior in an annealed SAE 1015 steel

Engineering Fracture Mechanics

Volumn 72, Issue 13, 2005, Pages 2106-2127

  Okayasu, M ^a   Wang, Zhirui ^a   Chen, D L ^b  

^a UNIVERSITY OF TORONTO   (Canada)

^b RYERSON UNIVERSITY   (Canada)

Author keywords

Artificial asperity; Crack closure; Crack opening displacement (COD); Plastic deformation; SAE 1015 steel

Indexed keywords

ANNEALING; COMPRESSION TESTING; CRACKS; ESTIMATION; ETCHING; MATHEMATICAL MODELS; MICROHARDNESS; PLASTIC DEFORMATION; STRUCTURAL LOADS;

CRACK OPENING DISPLACEMENT (COD) CURVES; ELASTIC DEFORMATIONS; HARD ARTIFICIAL ASPERITY; PLASTIC LOADS;

STEEL;

FRACTURE MECHANICS;

EID: 20844441978     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2004.12.006     Document Type: Article

References (62)

1. R.H. Christensen Fatigue crack growth affected by metal fragments wedged between opening - closing crack surfaces Appl Mater Res October 1963 207-210
2. W. Elber Fatigue crack closure under cyclic tension Engng Fract Mech 2 1970 37-45
3. Y. Birol Plastic deformation around fatigue cracks Metallography 21 1988 77-90
4. M.N. James M.N. Pacey L.W. Wei E.A. Patterson Characterization of plasticity-induced closure-crack flank contact force versus plastic enclave Engng Fract Mech 70 2003 2473-2487
5. K. Solanki S.R. Daniewicz J.C. Newman Jr. Finite element modeling of plasticity-induced crack closure with emphasis on geometry and mesh refinement effects Engng Fract Mech 70 2003 1475-1489
6. R.C. McClung B.H. Thacker S. Roy Finite element visualization of fatigue crack closure in plane-stress and plane-strain Int J Fract 50 1991 27-49
7. Orura K, Ohji K, Honda K. Influence of mechanical factors on the fatigue crack closure. In: Advances in research on the strength and fracture of materials (Fracture 1977), Proceeding, 4th International Conference on Fracture Mechanics, Waterloo, Canada; vol. 2B; 1977. p. 1035-47.
8. L.W. Wei M.N. James Numerical modeling of plasticity-induced crack closure for interfacial cracks in bi-material specimens Engng Fract Mech 71 2004 309-327
9. M.N. James J.K. Knott An assessment of crack closure and the extent of the short crack regime in QIN (HY 80) steel Fatigue Fract Engng Mater Struct 8 1985 171-191
10. R.C. McClung H. Sehitoglu On the finite element analysis of fatigue crack closure. Part I; basic modeling issues Engng Fract Mech 33 1989 237-252
11. J.C. Newman Jr. An evaluation of the plasticity-induced crack-closure concept and measurement methods NASA TM-1998-208430 1998 1-26
12. Newman Jr JC. A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading. In: Methods and models for predicting fatigue crack growth under random loading, ASTM STP; vol. 748. 1981. p. 53-84.
13. J.C. Newman Jr. FASTRAN II - a fatigue crack growth structural analysis program NASA TM 104159 1992
14. J.C. Newman Jr. A. Brot C. Matias Crack-growth calculations in 7075-T7351 aluminum alloy under various load spectra using an improved crack-closure model Engng Fract Mech 71 2004 2347-2363
15. L.W. Wei M.N. James A study of fatigue crack closure in polycarbonate CT specimens Engng Fract Mech 66 2000 223-242
16. A.K. Vasudevan K. Sadananda N. Louat Reconsideration of fatigue crack closure Scr Metall Mater 27 1992 1673-1678
17. N. Louat K. Sadananda M. Duesbury A.K. Vasudevan A theoretical evaluation of crack closure Metall Trans A 24 1993 2225-2232
18. A.K. Vasudevan K. Sadananda N. Louat A review of crack closure, fatigue crack threshold and related phenomena Mater Sci Engng A188 1994 1-22
19. R. Pippan F.O. Riemelmoser Visualization of the plasticity-induced crack closure under plane strain conditions Engng Fract Mech 60 1998 315-322
20. S. Suresh R.O. Ritchie A geometric model for fatigue crack closure induced by fracture surface roughness Metall Trans A 13A 1982 1627-1631
21. R.O. Ritchie S. Suresh Some considerations on fatigue crack closure at near-threshold stress intensities due to fracture surface morphology Metall Trans A 13A 1982 937-940
22. M.R. Parry S. Syngellakis I. Sinclair Numerical modeling of combined roughness and plasticity induced crack closure effects in fatigue Mater Sci Engng A291 2000 224-234
23. S.H. Wang C. Müller H.E. Exner A model for roughness-induced fatigue crack closure Metall Mater Trans A 29A 1998 1933-1939
24. J. Wasén B. Karlsson The relation between fracture surface geometry and crack closure in fatigue In; H. Kitagawa T. Tanaka Eds., Fatigue 90 1990 Materials and Component Engineering Publications Ltd Birmingham 1289-1294
25. R.O. Ritchie S. Suresh C.M. Moss Near-threshold fatigue crack growth in 2 1/4Cr-1Mo pressure vessel steel in air and hydrogen J Engng Mater Technol 102 1980 293-299
26. S. Suresh G.F. Zamiski R.O. Ritchie Oxide-induced crack closure: An explanation for near-threshold corrosion fatigue crack growth behavior Metall Trans A 12A 1981 S1435-S1443
27. J.H. Kim S.B. Lee Behavior of plasticity-induced crack closure and roughness-induced crack closure in aluminum alloy Int J Fatigue 23 2001 247-251
28. K. Minakawa A.J. McEvily On crack closure in the near-threshold region Scr Metall 15 1981 633-636
29. K. Minakawa Y. Matsuo A.J. McEvily The influence of a duplex microstructure in steels on fatigue crack growth in the near-threshold region Metall Trans A 13A 1982 439-443
30. R.S. Vecchio J.S. Crompton R.W. Hertzberg Anomalous aspects of crack closure Int J Fract 31 1986 R29-R33
31. R.W. Hertzberg C.H. Newton R. Jaccard Crack closure: Correlation and confusion. Mechanics of Fatigue Crack Closure In: J.C. Newman Jr. W. Elber Eds. ASTM STP 982 1988 American Society for Testing and Materials Philadelphia 139-148
32. B.C. Sheu P.S. Song C.S. Shin The effect of infiltration induced crack closure on crack growth retardation Scr Metall Mater 31 1994 1301-1306
33. P.S. Song B.C. Sheu H.H. Chou Deposition of plating metals to improve crack growth life Int J Fatigue 23 2001 259-270
34. A. UR-Rehman P.F. Thomason The effect of artificial fatigue-crack closure on fatigue-crack growth Fatigue Fract Engng Mater Struct 16 1993 1081-1090
35. C.S. Shin S.H. Hsu Fatigue life extension by an artificially induced retardation mechanism Engng Fract Mech 43 1992 677-684
36. P.K. Sharp J.Q. Clayton G. Clark Retardation and repair of fatigue cracks by adhesive infiltration Fatigue Fract Engng Mater Struct 20 1997 605-614
37. S. Suresh R.O. Ritchie Some considerations on the modelling of oxide-induced fatigue crack closure using solutions for a rigid wedge inside a linear elastic crack Scr Metall 17 1983 575-580
38. M. Maiti R. Paramguru Stress distribution due to a crack opened by a semi-infinite wedge Int J Fract 18 1982 39-44
39. D.L. Chen B. Weiss R. Stickler A model for crack closure Engng Fract Mech 53 1996 493-509
40. H. Tada P.C. Paris Theoretical analysis of load - displacement relations associated with crack surface interface Int J Fatigue 25 2003 915-922
41. P.C. Paris H. Toda J.K. Donald Service load fatigue damage - a historical perspective Int J Fatigue 21 1999 S35-S46
42. Chen DL, Wang Z. Modeling of fatigue crack closure effect incorporated with the asperity plasticity. In: Bodner SR, Rittel D, Sherman D, editors. The 9th International Conference on the Mechanical Behavior of Materials (ICM-9), Geneva, Switzerland; 2003.
43. D.L. Chen Z. Wang Derivation of applied stress - crack opening displacement relationships for the evaluation of effective stress intensity factor range Int J Fract 125 2004 371-386
44. S.K. Koh S.J. Oh C. Li F. Ellyin Low-cycle fatigue life of SiC - particulate-reinforced Al - Si cast alloy composites with tensile mean strain effects Int J Fatigue 21 1999 1019-1032
45. J.C. Healy C.J. Beevers A study of fatigue crack growth in a particulate-reinforced Al - Si alloy at 23 and 220 °C Mater Sci Engng A142 1991 183-192
46. w Mater Sci Engng A291 2000 235-245
47. S. Kumai J. Hu Y. Higo S. Nunomura Effects of dendrite cell size and particle distribution on the near-threshold fatigue crack growth behavior of cast Al - SiCp composites Acta Mater 44 1996 2249-2257
48. M. Okayasu N. Nishi K. Kanazawa Effects of silicon contents on tensile properties of Al - Si - Cu alloy die castings J Jpn Foundry Engng Soc 70 1998 266-272
49. Okayasu M, Nishi N, Ohmura H, Kanazawa K. Effect of silicon contents on mechanical properties of Al - Si- Cu alloy die castings. In: Proceedings of the 130th Conference of Japan Foundry Engineering Society, Chiba, Japan; 1997. p. 92.
50. M. Fernandes J.C. Pires N. Cheung A. Garia Influence of refining time on nonmetallic inclusions in a low-carbon, silicon-killed stee1 Mater Charact 51 2003 301-308
51. T.A. Khalifa Effect of inclusions on the fatigue limit of a heat-treated carbon steel Mater Sci Engng A 102 1988 175-180
52. S. Preston Bending fatigue strength of nitrocarburized steel SS2244 Mater Sci Engng A160 1993 7-15
53. D.M. Fegredo C. Pritchard A metallographic examination of rollers subjected to wear under rolling - sliding conditions Wear 49 1978 67-78
54. G.R. Sarrafi-nour T.W. Coyle Temperature dependence of crack wake bridging stresses in a SiC-whisker-reinforced alumina Acta Mater 49 2001 3553-3563
55. H. Kim O. Fukunaga M. Yoshikawa Performance of prestressed wire-wounded cylindrical die and fatigue test of piano wire J Jpn Soc Technol Plast 31 1990 893-898
56. Okayasu M, Wang Z, Chen DL. An etching technique for revelation of plastic deformation zone in a low carbon steel. Mater Sci T 2005;21, in press.
57. A. Fry Kraftwirkungsfiguren in flußeisen, dargestellt durch ein neues aetzverfahren Stahle und Eisen 41 1921 1093-1097
58. G.S. Holister C. Thomas I. King Yield behaviour of a split fibre in a two-dimensional elasto-plastic matrix: An experimental analysis Fibre Sci Technol 1 1969 227-241
59. D.S. Dugdale Yielding of steel sheets containing slits J Mech Phys Solids 8 1960 100-108
60. S.A. Meguid Engineering fracture mechanics 1st ed 1989 Elsevier Applied Science Amsterdam p. 170-83
61. M. Janssen J. Zuidema R.J.H. Wanhill Fracture mechanics 2nd ed 2002 Delft University Press p. 64-5
62. W.F. Brown Jr. J. Srawley ASTM STP 410 1966 1-65