Fluidized bed spray granulation-A new model for the description of particle wetting and of temperature and concentration distribution

Chemical Engineering and Processing: Process Intensification

Volumn 38, Issue 4-6, 1999, Pages 635-663

  Heinrich, Stefan ^a   Mörl, Lothar ^a  

^a OTTO VON GUERICKE UNIVERSITY   (Germany)

Author keywords

Coating; Drying; Fluidized bed; Granulation; Heat transfer; Mass transfer; Wetting

Indexed keywords

COATING TECHNIQUES; DRYING; FLUIDIZED BEDS; HEAT TRANSFER; JETS; MASS TRANSFER; MATHEMATICAL MODELS; PARTICLE SIZE ANALYSIS; SPRAYING; TEMPERATURE DISTRIBUTION; WETTING;

FLUIDIZED BED SPRAY GRANULATION;

GRANULATION;

COATING; DRYING; FLUIDIZED BED; GRANULATION; HEAT TRANSFER; MASS TRANSFER; WETTING;

EID: 20644439104     PISSN: 02552701     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0255-2701(99)00065-3     Document Type: Article

References (53)

1. D. Reppmann, Experimentelle und theoretische Untersuchungen zur Eindüsung von Flüssigkeiten in eine Wirbelschicht, Ph.D. thesis TU Magdeburg, 1990.
2. Minaev G.A., Shakova N.A. Investigation of the temperature field in the spray zone of a granulator with a fluidized bed. Int. Chem. Eng. 13(1):1973;65-68.
3. J. Kucharski, A. Kmiec, Analysis of simultaneous drying and coating of tablets in a spouted bed, Drying '86, Proceedings of the 5th International Drying Symposium, Hemisphere, 1986, vol. 1, pp. 204-217.
4. Bodrov V.I., Minaev G.A. Mathematical model of the process of granulation in a fluidised bed. Theor. Found. Chem. Eng. 21(1):1987;67-77.
5. Wnukowski P., Setterwall F. The coating of particles in a fluidized bed (RTD in a system of two coupled perfect mixers). Chem. Eng. Sci. 44(3):1989;493-505.
6. Kleinbach E., Riede T. Coating of solids. Chem. Eng. Proc. 34:1995;329-337.
7. Smith P.G., Nienow A.W. On atomising a liquid into a gas fluidised bed. Chem. Eng. Sci. 37(6):1982;950-954.
8. Maronga S.J., Wnukowski P. Establishing temperature and humidity profiles in fluidized bed particulate coating. Powder Technol. 94:1997;181-185.
9. Maronga S.J., Wnukowski P. Modelling of the three-domain fluidized bed particulate coating process. Chem. Eng. Sci. 52:1997;2915-2931.
10. Uhlemann H. Kontinuierliche Wirbelschicht-Sprühgranulation. Chem.-Ing.-Tech. 62(10):1990;822-834.
11. Kruglov V.A. et al. Deposition of polydisperse droplets on particles in a fluidized bed. Zh. Prikl. Khim. 50(8):1977;1744-1758.
12. K.C. Link, Untersuchung der Granulatbildung an einer frei schwebenden Einzelpartikel, Ph.D. thesis, Universität Karlsruhe (1997), VDI-Fortschritt-Berichte Reihe 3, Nr. 491, VDI Verlag, 1997.
13. R.-D. Becher, Untersuchung der Agglomeration von Partikeln bei der Wirbelschicht-Sprühgranulation, Ph.D. thesis, Universität Karlsruhe (1997), VDI-Fortschritt-Berichte Reihe 3, Nr. 500, VDI Verlag, 1997.
14. Walzel P., Benien L. Herstellen von Partikeln aus Suspensionen und Schmelzen durch Erstarren von Tropfen in einer Wirbelschicht. Chem.-Ing.-Tech. 71(1,2):1999;72-76.
15. B. Dencs, Z. Ormós, Particle formation from solution in a gas fluidized bed, Powder Technol. 31 (1982) 85-91 (Part I), 93-99 (Part II).
16. B. Dencs, Z. Ormós, Particle formation from solution in a gas fluidized bed, Powder Technol. 31 (1982) 85-91 (Part I), 93-99 (Part II).
17. Mörl L., Mittelstraß M., Sachse J. Berechnung der Verteilungsspektren von Feststoffgranulatteilchen in Wirbelschichtapparaten mit klassierendem Abzug. Chem. Technol. 30(5):1978;242-245.
18. Mörl L., Sachse J., Schuart L., Mittelstraß M. Zur Berechnung und Optimierung von Wirbelschichtgranulationstrocknungsanlagen. Chem. Technol. 31(6):1979;295-297.
19. L. Mörl, Anwendungsmöglichkeiten und Berechnung von Wirbelschichtgranulationstrocknungsanlagen, Ph.D. thesis B TH Magdeburg, 1981.
20. M. Trojosky, Modellierung des Stoff- und Wärmetransportes in flüssigkeitsbedüsten Gas/Feststoff-Wirbelschichten, Ph.D. thesis, Technische Universität Magdeburg, 1991.
21. P. Wnukowski, On the coating of particles in fluid-bed granulators (Modelling and simulation of the residence-time distributions in different processing units), Ph.D. thesis, Royal Institute of Technology, Stockholm, 1989.
22. P.G. Smith, A.W. Nienow, Particle growth mechanism in fluidised bed granulation, Chem. Eng. Sci. 38(8) (1983) 1223-1231, 1233-1240.
23. A. Maroglou, A.W. Nienow, Fluidised bed granulation: a procedure for determining its feasibility and suitable operating parameters, in: Powtech '85, Particle Technology, I. Chem. E. Symposium Series, No. 91, pp. 15-25.
24. Huang C.-C., Kono H.O. A mathematical coalescence model in the batch fluidized bed granulator. Powder Technol. 55:1988;35-49.
25. H. Schuchmann, Untersuchungen zur Strahlagglomeration pulverförmiger Lebensmittel, Ph.D. thesis, Universität Karlsruhe, 1993.
26. S. Hogekamp, Über eine modifizierte Strahlagglomerationsanlage zur Herstellung schnell dispergierbarer Pulver, Ph.D. thesis, Universität Karlsruhe, 1997.
27. Zhou T., Li H. Estimation of agglomerate size for cohesive particles during fluidization. Powder Technol. 94:1999;57-62.
28. Iwadate Y., Horio M. Prediction of agglomerate sizes in bubbling fluidized beds of group C powders. Powder Technol. 100:1998;223-236.
29. Hatzantonis H., Goulas A., Kiparissides C. Comprehensive model for the prediction of particle-size distribution in catalyzed olefin polymerization fluidized-bed reactors. Chem. Eng. Sci. 53:1998;3251-3267.
30. Nakamura H., Abe E., Yamada N. Coating mass distributions of seed particles in a tumbling fluidized bed coater - Part II. A Monte Carlo simulation of particle coating. Powder Technol. 99:1998;140-146.
31. Anon., Modelling of heat transfer in fluidized-bed coating of thin plates, Chem. Eng. Sci. 53 (1998) 1307-1310.
32. Jamialahmadi M., Malayeri M.R., Müller-Steinhagen H. Heat transfer to liquid/solid fluidized beds in cylindrical pipes. Dev. Chem. Eng. Mineral Proc. 5(1-2):1997;5-20.
33. Kawei S. Granulation and drying or powdery of liquid materials by fluidized bed technology. Drying Technol. 4(11):1993;719-731.
34. Moseley J.L., O'Brien T.J. Model for agglomeration in a fluidized bed. Chem. Eng. Sci. 17(48):1993;3043-3050.
35. Watano S., Terashita K., Miyanami K. Analysis of granulation process and determination of operational end point in a tumbling fluidized bed granulation. Bull. Univ. Osaka Prefect. Ser. A. 2(41):1992;47-56.
36. Baron T., Briens C.L. Size distribution of the particles entrained from fluidized beds: gas humidity effects. Can. J. Chem. Eng. 4(70):1992;631-635.
37. Waldie B. Growth mechanism and the dependence of granule size on drop size in fluidized bed granulation. Chem. Eng. Sci. 11(46):1991;2781-2785.
38. Song B.H., Lee G.S., Kim S.D. Particle growth characteristics in drying of orthophosphate solution in a fluidized bed. J. Chem. Eng. Jpn. 2(23):1990;148-154.
39. J. Burgschweiger, A population balance model for the fluidized bed drying, in Proceedings of the 11th International Drying Symposium (IDS'98), Halkidiki, Greece, August 19-22, 1998, vol. A, pp. 134-141.
40. D. Bellgardt, Zur Quervermischung des Feststoffes in Gas/Feststoff-Wirbelschichten, Ph.D. thesis, TU Hamburg-Harburg, 1985.
41. Kuipers J.A.M., Hoomans B.P.B., van Swaaij W.P.M. Hydrodynamic models of gas-fluidized beds and their role for design and operation of fluidized bed chemical reactors. Fan L.-S., Knowlton T.M. Fluidization IX. 1998;15-30 Engineering Foundation, New York.
42. Boemer A., Qi H., Renz U. Eulerian simulation of bubble formation at a jet in a two-dimensional fluidized bed. J. Multiphase Flow. 23(5):1997;927-944.
43. H. Groenewold, E. Tsotsas, Predicting apparent Sherwood numbers for fluidized beds, Proceedings of the 11th International Drying Symposium (IDS'98), Halkidiki, Greece, August 19-22, 1998, vol. A, pp. 192-199.
44. W. Kast, H. Klan, Wärmeübergang durch freie Konvektion an umströmten Körpern, VDI-Wärmeatlas, 7. Auflage, 1994, Fa1-Fa7.
45. H. Martin, Wärmeübertragung zwischen Einbauten und Gas-Feststoff-Wirbelschichten, VDI-Wärmeatlas, 7. Auflage, 1994, Mf4-Mf8.
46. D. Shi, Fluiddynamik und Wärmeübergang in einer zirkulierenden Wirbelschicht, Ph.D. thesis, ETH-Zürich, 1996, VDI-Fortschritt-Berichte Reihe 3, Nr. 466, VDI Verlag, 1997.
47. Villadsen J., Michelson M.L. Solutions of differential equation models by polynomial approximation. 1978;Prentice-Hall, Englewood Cliffs, NJ.
48. A. Seidel-Morgenstern, O. Schramm, Numerische Methoden in der Chemischen Verfahrenstechnik, lecture manuscript, Universität Magdeburg, 1998.
49. van Kan J.J.I.M., Segal A. Numerik partieller Differentialgleichungen für Ingenieure. 1995;Teubner, Stuttgart.
50. Löffler F. Staubabscheiden. 1988;Thieme, Stuttgart.
51. G. Schuch, Theoretische und experimentelle Untersuchungen zur Auslegung von Naßabscheidern, Ph.D. thesis, Universität Karlsruhe, 1978.
52. Kawase Y., Moo-Young M. Gas-bubble hold-up and axial dispersion coefficient of emulsion phases in fluidized beds. Can. J. Chem. Eng. 65(3):1987;505-507.
53. Heinrich S., Mörl L. Description of the temperature, humidity and concentration distribution in gas-liquid-solid fluidized beds. Chem. Eng. Technol. 22(2):1999;118-122.