Experimental investigation of the turbulent boundary layer of surfaces coated with marine antifoulings

Journal of Fluids Engineering, Transactions of the ASME

Volumn 127, Issue 2, 2005, Pages 219-232

  Candries, M ^a   Atlar, M ^a  

^a NEWCASTLE UNIVERSITY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

BIOCIDES; DRAG; FUEL CONSUMPTION; LASER DOPPLER VELOCIMETERS; TEXTURES; TURBULENCE; TURBULENT FLOW;

FOUL RELEASE COATINGS; MARINE ANTIFOULINGS; SAND-GRIT ROUGH WALLS; WATER TUNNELS;

BOUNDARY LAYERS;

EID: 20444462074     PISSN: 00982202     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1891148     Document Type: Article

References (41)

1. Baier, R. E., 1970, "Surface Properties Influencing Biological Adhesion," in Adhesion in Biological Systems, R. S. Manly, ed., Academic, New York, pp. 15-48.
2. Meyer, A. E., Baier, R. E., and King, R. W., 1988, "Initial Fouling of Nontoxic Coatings in Fresh, Brackish and Sea Water," Can. J. Chem. Eng., 66, pp. 55-62.
3. Kovach, B. S., and Swain, G. W., 1998, "A Boat Mounted Foil to Measure the Drag Properties of Antifouling Coatings Applied to Static Immersion Panels," Proc. Int. Symp. Seawater Drag Reduction, Newport, Rhode Island, pp. 169-173.
4. Millett, J., and Anderson, C. D., 1997, "Fighting Fast Ferry Fouling," Fast '97, Conference Papers, 1, pp. 493-495.
5. Candries, M., Atlar, M., and Anderson, C. D., 2000, "Considering the Use of Alternative Antifoulings: The Advantages of Foul Release Systems," Conference Proceedings ENSUS 2000, University of Newcastle-upon-Tyne, pp. 88-95.
6. Candries, M., 2001, "Drag, Boundary-Layer and Roughness Characteristics of Marine Surfaces Coated with Antifoulings," Ph.D. thesis, Department of Marine Technology, University of Newcastle-upon-Tyne, UK, http://www.geocities.com/maxim_candries/
7. Atlar, M., 2000, "A History of the Emerson Cavitation Tunnel and its Role in Propeller Cavitation Research," NCT '50 International Conference on Propeller Cavitation, University of Newcastle-upon-Tyne, pp. 3-34.
8. Atlar, M., and Korkut, E., 1997, "Emerson Cavitation Tunnel Inflow Characteristics Based on 2-D Laser Doppler Anemometry Analysis," Report No. MT-1997-001, University of Newcastle-upon-Tyne, Newcastle-upon-Tyne.
9. Thomas, T. R., 1999, Rough Surfaces, 2nd ed., Imperial College Press, London.
10. Klebanoff, P. S., and Diehl, Z. W., 1952, "Some Features of Artificially Thickened Fully Developed Turbulent Boundary Layers with Zero Pressure Gradient," NACA Report No. 1110, http://naca.larc.nasa.gov/ reports/1952/naca-report-1110/.
11. Hanratty, T. J., and Campbell, J. A., 1996, "Measurement of Wall Shear Stress," in Fluid Mechanics Measurements, 2nd ed., R. J. Goldstein (Ed.), Taylor & Francis, Philadelphia, 575-648.
12. Clauser, F. H., 1954, "Turbulent Boundary Layer in Adverse Pressure Gradients," J. Aeronaut. Sei. 21, pp. 91-108.
13. Perry, A. E., and Joubert, P. N., 1963, "Rough Wall Boundary Layers in Adverse Pressure Gradients," J. Fluid Mech., 17, pp. 193-211.
14. Schultz, M. P., and Swain, G. W., 1999, "The Effect of Biofilms on Turbulent Boundary Layers," ASME J. Fluids Eng. 121, pp. 44-51.
15. Schultz, M. P., 2000, "Turbulent Boundary Layers on Surfaces Covered with Filamentous Algae," ASME J. Fluids Eng. 122, pp. 357-362.
16. Hama, F. R., 1954, "Boundary Layer Characteristics for Smooth and Rough Surfaces," Soc. Nav. Archit. Mar. Eng., Trans., 62, pp. 333-358.
17. Bandyopadhyay, P. R., 1987, "Rough-Wall Turbulent Boundary Layers in the Transition Regime," J. Fluid Mech., 180, pp. 231-266.
18. Perry, A. E., Lim, K. L., and Henbest, S. M., 1987, "An Experimental Study of the Turbulence Structure in Smooth- and Rough-Wall Boundary Layers," J. Fluid Mech., 177, pp. 437-466.
19. Krogstad, P.-A., Antonia, R. A., and Browne, L. W. B., 1992, "Comparison between Rough- and Smooth-Wall Turbulent Boundary Layers," J. Fluid Mech., 245, pp. 599-617.
20. Tachie, M. F., Bergstrom, D. J., and Balachandar, R., 2000, "Rough Wall Turbulent Boundary Layers in Shallow Open Channel Flow," ASME J. Fluids Eng., 122, pp. 533-541.
21. Ligrani, P. M., and Moffat, R. J., 1986, "Structure of Traditionally Rough and Fully Rough Turbulent Boundary Layers," J. Fluid Mech., 162, pp. 69-98.
22. Coleman, H. W., and Steele, W. G., 1999, Experimentation and Uncertainty Analysis for Engineers, Wiley, New York.
23. Hinze, J. O., 1975, Turbulence, McGraw-Hill, New York, p. 633.
24. Keirsbulck, L., Labraga L., Mazouz, A., and Touraier, C., 2002, "Surface Roughness Effects on Turbulent Boundary Layer Structures," ASME J. Fluids Eng., 124, pp. 127-135.
25. Monin, A. S., and Yaglom, A. M., 1971, Statistical Fluid Mechanics: Mechanics of Turbulence, MIT, Cambridge, Vol. 1.
26. Tachie, M. F.,-Bergstrom, D. J., Balachandar, R., and Ramachandran, S., 2001, "Skin Friction Correlation in Open Channel Boundary Layers," ASME J. Fluids Eng., 123, pp. 953-956.
27. Candries, M., and Atlar, M., 2003, "On the Drag and Roughness Characteristics of Antifoulings," Soc. Nav. Archil. Mar. Eng., Trans., 145 Part A2, pp. 35-60.
28. Granville, P. S., 1987, "Three Indirect Methods for the Drag Characterization of Arbitrarily Rough Surfaces on Flat Plates," J. Ship Res., 31, pp. 70-77.
29. Colebrook, C. F., and White, C. M., 1937, "Experiments with Fluid Friction in Roughened Pipes," Proc. R. Soc. London, Ser. A, 161, pp. 367-381.
30. Perry, A. E., Hafez, S., and Chong, M. S., 2001, "A Possible Reinterpretation of the Princeton Superpipe Data," J. Fluid Mech., 439, pp. 395-401.
31. Canham, H. J. S., 1975, "Resistance, Propulsion and Wake Tests with HMS Penelope," Transactions of the Soc. Nav. Archil. Mar. Eng., Trans. 117, pp. 61-94.
32. Yaglom, A. M., 1979, "Similarity Laws for Constant-Pressure and Pressure-Gradient Turbulent Wall Flows," Annu. Rev. Fluid Mech., 11, pp. 505-540.
33. Raupach, M. R., Antonia, R. A., and Rajagopalan, S., 1991, "Rough-Wall Turbulent Boundary Layers," Appl. Mech. Rev., 44, pp. 1-25.
34. Grass, A. J., 1971, "Structural Features of Turbulent Flow over Smooth and Rough Boundaries," J. Fluid Mech., 50, pp. 233-255.
35. Kutlar, A. I., and Lewkowicz, A. K., 1990, "Investigation of the Effect of a Paint Coat on the Turbulence near a Rough Flat Plate," International Workshop on Marine Roughness and Drag, R.I.N.A., London, Paper 6.
36. Musker, A. J., 1990, "Turbulence Measurements in a Shear-Layer Associated with a Ship-Hull Roughness," International Workshop on Marine Roughness and Drag, R.I.N.A., London, Paper 10.
37. Gangadharan, S. N., Schultz, M., Collino, B., Clark, A., and Wimberly, C. R., 2001, "Experimenlal Investigation of Enteromorpha clathrata Bioflouling on Lifting Surfaces of Marine Vehicles," Mar. Technol. Soc. J., 38, pp. 31-50.
38. Antonia, R. A., and Krogstad, P.-A., 2001, "Turbulence Structure in Boundary Layers over Different Types of Surface Roughness," Fluid Dyn. Res., 28, pp. 139-157.
39. George, W. K., and Castillo, L., 1997, "Zero Pressure Gradient Turbulent Boundary Layer," Appl. Mech. Rev., 50, pp. 689-729.
40. Antonia, R. A., and Luxton, R. E., 1971, "The Response of a Turbulent Boundary Layer to a Step Change in Surface Roughness. 1. Smooth-to-Rough," J. Fluid Mech., 48, pp. 721-761.
41. Tachie, M. F., 2000, "Open Channel Turbulent Boundary Layers and Wall Jets on Rough Surfaces", Ph.D. thesis, Department of Mechanical Engineering, University of Saskatchewan, Saskatoon.