Heat transfer in two-pass rotating rectangular channels (AR=2:1) with discrete V-shaped and discrete angled rib turbulators

American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD

Volumn 375, Issue 1, 2004, Pages 545-554

  Fu, Wen Lung ^a   Wright, Lesley M ^a   Han, Je Chin ^a  

^a Department of Electrical and Computer Engineering   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ASPECT RATIO; CHANNEL FLOW; COOLANTS; COOLING; REYNOLDS NUMBER; SURFACE PROPERTIES; TURBINES; TURBOMACHINE BLADES; VISCOSITY;

BULK VELOCITY; RECTANGULAR CHANNELS; ROTATION NUMBER; TURBULATORS;

HEAT TRANSFER COEFFICIENTS;

EID: 20344393638     PISSN: 02725673     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2004-59563     Document Type: Conference Paper

References (40)

1. Han, J. C., Dutta, S., and Ekkad, S. V., 2000, Gas Turbine Heat Transfer And Cooling Technology, Taylor And Francis, New York.
2. Metzger, D. E., and Sahm, M. K., 1986, "Heat Transfer around Sharp 180° Turns in Smooth Rectangular Channels," ASME J. Heat Transfer, Vol. 108, pp. 500-506.
3. Fan, C. S., and Metzger, D. E., 1987, "Effects of Channel Aspect Ratio on Heat Transfer in Rectangular Passage Sharp 180° Turn," ASME Paper No. 87-GT-113.
4. Han, J. C., Chandra, P. R., and Lau, S. C., 1988, "Local Heat/Mass Transfer Distributions Around Sharp 180 Deg. Turns in Two-Pass Smooth and Rib-Roughened Channels," ASME J. Heat Transfer, Vol. 110, pp. 91-98.
5. Han, J. C., and Zhang, P., 1991, "Effect of Rib-Angle Orientation on Local Mass Transfer Distribution in a Three-Pass Rib-Roughened Channel," ASME J. Turbomachinery, Vol. 113, pp, 123-130.
6. Han, J.C., Zhang, Y. M., and Lee, C. P., 1991, "Augmented Heat Transfer in Square Channels with Parallel, Crossed, and V-Shaped Angled Ribs," ASME J. Heat Transfer, Vol. 113, pp. 590-596.
7. Park, J. S., Han, J. C., Huang, Y., and Ou, S., 1992, "Heat Transfer Performance Comparisons of Five Different Rectangular Channels with Parallel Angled Ribs," Int. J. Heat Mass Transfer, Vol. 35, No. 11, pp. 2891-2903.
8. Taslim, M. E., Li, T., and Kercher, D. M., 1996, "Experimental Heat Transfer and Friction in Channels Roughened with Angled, V-Shaped, and Discrete Ribs on Two Opposite Walls," ASME J. Turbomachinery, Vol. 118, pp. 20-28.
9. Ekkad, S. V., and Han, J. C., 1997, "Detailed Heat Transfer Distribution in Two-Pass Square Channels with Rib Turbulators," Int. J. Heat Mass Transfer, Vol. 40 (11), pp. 2525-2537.
10. Chen, Y., Nikitopoulos, D. E., Hibbs, R., Acharya, S., and Myrum, T. A., 2000, "Detailed Mass Transfer Distribution in a Ribbed Coolant Passage with a 180° Bend," Int. J. Heat and Mass Transfer, Vol. 43, pp. 1479-1492.
11. Cho, h. H., Wu, S. J., and Kwon, H. J., 2000, "Local Heat/Mass Transfer measurements in a Rectangular Duct with Discrete Ribs," J. Turbomachinery, Vol. 122, pp. 579-586.
12. Wagner, J. H., Johnson, B. V., and Hajek, T. J., 1991a, "Heat Transfer in Rotating Passage with Smooth Walls and Radial Outward Flow," ASME J. Turbomachinery, Vol. 113, pp. 42-51.
13. Wagner, J. H., Johnson, B. V., and Kooper, F. C., 1991b, "Heat Transfer in Rotating Passage with Smooth Walls," ASME J. Turbomachinery, Vol. 113, pp. 321-330.
14. Taslim, W. E., Rahman, A., and Spring, S. D., 1991, "An Experimental Investigation of Heat Transfer Coefficients in a Spanwise Rotating Channel with Two Opposite Rib-Roughened Walls," ASME J. Turbomachinery, Vol. 113, pp. 75-82.
15. Taslim, M. E., Bondi, L. A., and Kercher, D. M., 1991, "An Experimental Investigation of Heat Transfer in an Orthogonally Rotating Channel Roughened with 45 Deg Criss-Cross Ribs on Two Opposite Walls," ASME J. Turbomachinery, Vol. 113, pp. 346-353.
16. Han, J. C., Zhang, Y. M., and Kalkuehler, K., 1993, "Uneven Wall Temperature Effect on Local Heat Transfer in a Rotating Two-Pass Square Channel With Smooth Walls," ASME J. Heat Transfer, Vol. 115 (4), pp. 912-920.
17. Johnson, B. V., Wagner, J. H., Steuber, G. D., and Yeh, F. C., 1994a, "Heat Transfer in Rotating Serpentine Passage with Trips Skewed to the Flow," ASME J. Turbomachinery, Vol. 116, pp, 113-123.
18. Johnson, B. V., Wagner, J. H., Steuber, G. D., and Yeh, F. C., 1994b, "Heat Transfer in Rotating Serpentine Passage with Selected Model Orientations for Smooth or Skewed Trip Walls," ASME J. Turbomachinery, Vol. 116, pp. 738-744.
19. Parsons, J. A., Han, J. C., and Zhang, Y. M., 1994, "Wall Heating Effect on Local Heat Transfer in a Rotating Two-Pass Square Channel with 90° Rib Turbulators," Int. J. Heat Mass Transfer, Vol. 37 (9), pp. 1411-1420.
20. Parsons, J.A., Han, J. C., and Zhang, Y. M., 1995, "Effects of Model Orientation and Wall Heating Condition on Local Heat Transfer in a Rotating Two-Pass Square Channel with Rib Turbulators," Int. J. Heat Mass Transfer, Vol. 38 (7), pp. 1151-1159.
21. Zhang, Y. M., Han, J. C., Parsons, J. A., and Lee, C. P., 1995, "Surface Heating Effect on Local Heat Transfer in a Rotating Two-Pass Square Channel with 60° Angled Rib Turbulators," ASME J. Turbomachinery, Vol. 117, pp. 272-280.
22. Dutta, S., and Han, J. C., 1996, "Local Heat Transfer in Rotating Smooth and Ribbed Two-Pass Square Channels with Three Channel Orientations," ASME J. Heat Transfer, Vol. 118, pp. 578-584.
23. Dutta, S., Han, J. C., and Lee, C. P., 1996, "Local Heat Transfer in A Rotating Two-Pass Ribbed Triangular Duct with Two Model Orientations," Int. J. Heat Mass Transfer, Vol. 39, pp. 707-715.
24. Park, C. W., and Lau, S. C., 1998, "Effect of Channel Orientation of Local Heat (Mass) Distributions in A Rotating Two-Pass Square Channel with Smooth Walls," ASME J. Heat Transfer, Vol. 120, pp. 624-632.
25. Park, C. W., Yoon, C., and Lau, S. C., 2000, "Heat (Mass) Transfer in a Diagonally Oriented Rotating Two-Pass Channel with Rib-Roughened Walls," ASME J. Heat Transfer, Vol. 122, pp. 208-211.
26. Murata, A., Mochizuki, S., and Takahashi, T., 1999, "Local Heat Transfer Measurement of an Orthogonally Rotating Square Duct with Angled Rib Turbulators," Int. J. Heat and Mass Transfer, Vol. 42, pp. 3047-3056.
27. Liou, T. M., Chen, M. Y., and Tsai, M. H., 2002, "Fluid Flow and Heat Transfer in a Rotating Two-Pass Square Duct with In-Line 90-deg Ribs," ASME J. Turbomachinary, Vol. 124, pp. 260-268.
28. Al-Hadhrami, L., and Han, J. C., 2003, "Effect of Rotation on Heat Transfer in Two-Pass Square Channels with Five Different Orientations of 45° Angled Rib Turbulators," Int. J. Heat And Mass Transfer, Vol. 46, pp. 653-669.
29. Willett, F. T. and Bergles, A. E., 2001, "Heat Transfer in Rotating Narrow Rectangular Ducts with Heated Sides Orientated at 60° to the R-Z Plane," ASME J. Turbomachinery, Vol. 123, pp. 288-295.
30. Azad, G. S., Uddin, M. J., Han, J. C., Moon, H. K., and Glezer, B., 2002, "Heat Transfer in a Two-Pass Rectangular Rotating Channel with 45-Deg Angled Rib Turbulators," ASME J. Turbomachinery, Vol. 124, pp. 251-259.
31. Al-Hadhrami, L., Griffith, T. S., and Han, J. C., 2003, "Heat Transfer in Two-Pass Rotating Rectangular Channels (AR=2:1) with Five Different Orientations of 45° V-shaped Rib Turbulators," ASME J. Heat Transfer, Vol. 125, pp.232-242.
32. Griffith, T. S., Al-Hadhrami, L., and Han, J. C., 2002, "Heat Transfer in Rotating Rectangular Cooling Channels (AR=4) with Angled Ribs," ASME J. Heat Transfer, Vol. 124, pp. 617-625.
33. Lee, E., Wright. L. M., and Han, J. C., 2003, "Heat Transfer in Rotating Rectangular Channels (AR=4:1) with V-Shaped and Angled Rib Turbulators with and without Gaps," ASME Paper No. 2003-GT-38900.
34. Cho, H. H., Kim, Y. Y., Kim, K. M., and Rhee, D. H., 2003, "Effects of Rib Arrangements and Rotation Speed on Heat Transfer in a Two-Pass Duct," ASME Paper No. 2003-GT-38609.
35. Agarwal, P., Acharya, S., and Nikitopoulos, D. E., 2003, "Heat/Mass Transfer in 1:4 Rectangular Passages with Rotation," ASME Paper No. 2003-GT-38615.
36. Fu, W. L., Wright, M. L., and Han, J. C., 2004, "Heat Transfer in Two=Pass Rotating Rectangular Channels (AR=1:2 and AR=1:4) with 45° Angled Rib Turbulators," ASME Paper No. 2004-53261.
37. Wright, M. L., Fu, W. L., and Han, J. C., 2004, "Thermal Performance of Angled, V-Shaped, and W-Shaped rib Turbulators in Rotating Rectangular Cooling Channels (AR=4:1)," ASME Paper No. 2004-54073.
38. Kline, S. J., and McClintock, F. A., 1953, "Describing Uncertainty in Single-Sample Experiments," Mechanical Engineering, Vol. 75, pp. 3-8.
39. Al-Qahtani, M., Jang, Y. J., Chen, H. C., and Han, J. C., 2002, "Prediction of Flow and Heat Transfer in Rotating Two-Pass Rectangular Channels with 45-deg Rib Turbulators," ASME J. Turbomachinery, Vol. 124, pp. 242-250.
40. Su, G., Teng, S., Chen, H. C., and Han, J. C., 2003, "Computation of Flow and Heat Transfer in Rotating Rectangular Channels (AR=4) with V-Shaped Ribs by a Reynolds Stress Turbulence Model," ASME Paper No. GT2003-38348.