Thin-walled beams made of functionally graded materials and operating in a high temperature environment: Vibration and stability

Journal of Thermal Stresses

Volumn 28, Issue 6-7, 2005, Pages 649-712

  Librescu, Liviu ^a,c   Oh, Sang Yong ^a   Song, Ohseop ^b  

^a State University   (United States)

^b Chungnam National University   (South Korea)

^c VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CERAMIC MATERIALS; COMPOSITION; EIGENVALUES AND EIGENFUNCTIONS; FUNCTIONALLY GRADED MATERIALS; ROTATING MACHINERY; THERMAL GRADIENTS; THERMOELASTICITY; THIN WALLED STRUCTURES; TURBOMACHINE BLADES; VIBRATIONS (MECHANICAL); VOLUME FRACTION;

DIVERGENCE AND FLUTTER INSTABILITIES; GEOMETRICALLY NONLINEAR THIN-WALLED BEAMS; HIGH TEMPERATURE FIELD; ROTATING/SPINNING THIN-WALLED BEAMS;

BEAMS AND GIRDERS;

EID: 19944407928     PISSN: 01495739     EISSN: None     Source Type: Journal    
DOI: 10.1080/01495730590934038     Document Type: Article

References (52)

1. A. Berezovski, J. Engelbrecht, and G. A. Maugin, Numerical Simulation of Two-Dimensional Ware Propagation in Functionally Graded Materials, European Journal of Mechanics A/Solids, vol. 22, pp. 257-265, 2003.
2. J. Aboudi, M. Pindera, and S. M. Arnold, Thermoelastic Theory for the Response of Materials Functionally Graded in Two Directions, International Journal of Solids and Structures, vol. 33, no. 7, pp. 931-966, 1996.
3. J. Aboudi, M. J. Pindera, and S. M. Arnold, Higher-Order Theory for Functionally Graded Materials, Composites: Part B, vol. 30, pp. 777-832, 1999.
4. B. V. Sankar and T. J. Tzeng, Thermal Stresses in Functionally Graded Beams, AIAA Journal, vol. 40, no. 6, pp. 1228-1232, 2002.
5. B. V. Sankar, An Elasticity Solution for Functionally Graded Beams, Composites Science and Technology, vol. 61, pp. 689-696, 2001.
6. Y. Tanigawa, Theoretical Approach of Optimum Design for a Plate of Functionally Gradient Materials Under Thermal Loading, Thermal Shock and Thermal Fatigue Behavior of Advanced Ceramics, NATO ASI Series E, vol. 241, pp. 171-180, 1992.
7. N. Noda and Z. H. Jin, Thermal Stress Intensity Factors for a Crack in a Strip of a Functionally Gradient Material, International Journal of Solids and Structures, vol. 30, pp. 1039-1056, 1993.
8. V. Birman, Buckling of Functionally Graded Hybrid Composite Plates, Proceedings of the 10th Conference on Engineering Mechanics, vol. 2, Boulder, CO, pp. 1199-1202, 1995.
9. J. N. Reddy and C. D. Chin, Thermomechanical Analysis of Functionally Graded Cylinders and Plates, Journal of Thermal Stresses, vol. 21, pp. 593-626, 1998.
10. G. N. Praveen and J. N. Reddy, Nonlinear Transient Thermoelastic Analysis of Functionally Graded Ceramic-metal Plates, International Journal of Solids Structures, vol. 35, no. 33, pp. 4457-4476, 1998.
11. J. N. Reddy, Analysis of Functionally Graded Plates, International Journal of Numerical Meth. Engr., no. 47, pp. 663-684, 2000.
12. Z.-W. Cheng and R. C. Batra, Three-Dimensional Thermoelastic Deformation of a Functionally Graded Elliptic Plate, Composites, Part B, vol. 31, no. 2, pp. 97-106, 2000.
13. J. Yang and H.-S. Shen, Dynamic Response of Initially Stressed Functionally Graded Rectangular Thin Plates, Journal of Composite Structures, vol. 54, pp. 497-508, 2001.
14. R. Javaheri and M. R. Eslami, Buckling of Functionally Graded Plates Under in Plane Compressive Loading, ZAMM, vol. 82, pp. 277-283, 2002.
15. C. T. Loy, K. Y. Lam, and J. N. Reddy, Vibration of Functionally Graded Cylindrical Shells, International Journal of Mechanical Sciences, vol. 41, no. 3, pp. 309-324, 1999.
16. S. W. Gong, K. Y. Lam, and J. N. Reddy, The Elastic Response of Functionally Graded Cylindrical Shells to Low-Velocity Impact, International Journal of Impact Engineering, vol. 22, no. 4, pp. 397-417, 1999.
17. S. C. Pradhan, C. T. Loy, K. Y. Lam, and J. N. Reddy, Vibration Characteristics of Functionally Graded Cylindrical Shells Under Various Boundary Conditions, Journal of Applied Acoustics, vol. 61, no. 1, pp. 119-129, 2000.
18. H.-S. Shen, Postbuckling Analysis of Axially-Loaded Functionally Graded Cylindrical Shells in Thermal Environments, Composites Science and Technology, vol. 62, pp. 977-987, 2002.
19. S. Y. Oh, L. Librescu, and O. Song, Thermoelastic Modeling and Vibration of Functionally Graded Thin Walled Rotating Blades, AIAA Journal, vol. 41, no. 10, pp. 2051-2060, 2003.
20. S. Y. Oh, L. Librescu, and O. Song, Vibration of Turbomachinery Rotating Blades Made-up of Functionally Graded Materials and Operating in a High Temperature Field, Acta Mechanics, vol. 166, no. 2, pp. 69-87, 2003.
21. L. Librescu, S. Y. Oh, and O. Song, Spinning Thin-Walled Beams Mode of Functionally Graded Materials: Modeling, Vibration and Instability, European Journal of Mechanics A/Solids, vol. 23, no. 3, pp. 499-515, 2003.
22. S. Y. Oh, L. Librescu, and O. Song, Thin-Walled Rotating Blades made of Functionally Graded Materials: Modeling and Vibration Analysis, AIAA-2003-1541 on CD-Rom, 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics and Materials Conference, Norfolk, VA, 7-10, Apr, 2003.
23. O. Song and L. Librescu, Structural Modeling and Free Vibration Analysis of Rotating Composite Thin-Walled Beams, Journal of the American Helicopter Society, vol. 42, no. 4, October, pp. 358-369, 1997.
24. O. Song and L. Librescu, Modeling and Dynamic Behavior of Rotating Blades Carrying a Tip Mass and Incorporating Adaptive Capabilities, Acta Mechanica, vol. 134, pp. 169-197, 1999.
25. O. Song, L. Librescu, and S.-Y. Oh, Vibration of Pretwisted Adaptive Rotating Blades Modeled as Anisotropic Thin-Walled Beams, AIAA Journal, vol. 39, no. 2, pp. 285-295, 2001.
26. O. Song, L. Librescu, and S.-Y. Oh, Dynamics of Pretwisted Rotating Thin-Walled Beams Operating in a Temperature environment, Journal of Thermal Stresses, vol. 24, no. 3, pp. 255-279, 2001.
27. O. Song, S.-Y. Oh, and L. Librescu, Dynamic Behavior of Elastically Tailored Rotating Blades Modeled as Pretwisted Thin-Walled Beams and Incorporating Adaptive Capabilities, International Journal of Rotating Machinery, vol. 8, no. 1, pp. 13-25, 2002.
28. S. Y. Oh, O. Song, and L. Librescu, Effects of Pretwist and Presetting on Coupled Bending Vibrations of Rotating Thin-Walled Composite Beams, International J. of Solids and Structures, vol. 70, pp. 1203-1224, 2003.
29. K. B. Kaza and R. W. Kielb, Effects of Warping and Pretwist on Torsional Vibration of Rotating Beams, Journal of Applied Mechanics, Trans. ASME, vol. 51, Dec., pp. 913-920, 1984.
30. O. G. McGee, Influence of Warping-Pretwist Coupling on the Torsional Vibration of Centrifugally-Stressed Cantilevers with Thin-Walled Open Profiles, Computers & Structures, vol. 42, no. 2, pp. 175-195, 1992.
31. K. Washizu, Some Considerations on a Naturally Curved and Twisted Slender Beams, Journal of Mathematics and Physics, vol. 43, no. 2, pp. 111-116, 1964.
32. O. Song and L. Librescu, Free Vibration of Anisotropic Composite Thin-Walled Beams of Closed Cross-Section Contour, Journal of Sound and Vibration, 167, 129-147, 1993.
33. L. Librescu, L. Meirovitch, and S. S. Na, Control of Cantilevers Vibration via Structural Tailoring and Adaptive Materials, AIAA Journal, vol. 35, no. 8, pp. 1309-1315, 1997.
34. K. R. Subrahmanyam and K. R. V. Kaza, Vibration and Buckling of Rotating, Pretwisted, Preconed Beams Including Coriolis Effects, Journal of Vibration, Acoustics, Stress and Reliability in Design, Trans. ASME, vol. 108, pp. 140-149, April 1986.
35. D. H. Hodges and M. J. Rutkowski, Free-Vibration Analysis of Rotating Beams by a Variable-Order Finite-Element, AIAA Journal, vol. 19, no. 11, pp. 1459-1466, 1991.
36. A. N. Palazotto and P. E. Linnemann, Vibration and Buckling Characteristics of Composite Cylindrical Panels Incorporating the Effects of a Higher Order Shear Theory, International Journal of Solids and Structures, vol. 28, no. 3, pp. 341-361, 1991.
37. O. Song and L. Librescu, Anisotropy and Structural Coupling on Vibration and Instability of Spinning Thin-Walled Beams, Journal of Sound and Vibration, 204, pp. 477-494, 1998.
38. O. Song, N. H. Jeong, and L. Librescu, Implications of Conservative and Gyroscopic Forces on Vibration and Stability of Elastically Tailored Rotating Shaft Modeled as Composite Thin-Walled Beams, Journal of the Acoustical Society of America, vol. 109, pp. 972-981, 2001.
39. K. Huseyin and R. H. Plaut, Transverse Vibrations and Stability of Systems with Gyroscopic Forces, Journal of Structural Mechanics, vol. 3, pp. 163-177, 1974-1975.
40. L. Meirovitch, Principles and Techniques of Vibrations, Prentice-Hall, Upper Saddle River, NJ, 1997.
41. M. B. Rosales and C. P. Filipich, Dynamic Stability of a Spinning Beam Carrying an Axial Dead Load, Journal of Sound and Vibration, vol. 163, no. 2, pp. 283-294, 1993.
42. C. P. Filipich, M. J. Maurizi, and M. B. Rosales, Free Vibration of a Spinning Uniform Beam, With Ends Elastically Restrained Against Rotation, Journal of Sound Vibration, vol. 116, pp. 475-482, 1987.
43. M. L. Chen and Y. S. Liao, Vibration of Pretwisted Spinning Beams Under Axial Compressive Loads with Elastic Constrains, Journal of Sound and Vibration, vol. 147, pp. 497-513, 1991
44. G. Curti, F. A. Raffa, and F. Vatta, An Analytical Approach to the Dynamic of Rotating Shafts, Meccanica, vol. 27, pp. 285-292, 1992.
45. K. Bhaskar and L. Librescu, A Geometrically Non-Linear Theory for Laminated Anisotropic Thin-Walled Beams, International Journal of Engineering Science, vol. 33, no. 9, pp. 1331-1344, 1995.
46. D. H. Hodges and R. A. Ormiston, Stability of Elastic Bending and Torsion of Uniform Cantilever Rotor Blades in Hover with Variable Structurel Coupling, NASA TND-8192, April 1976.
47. K. B. Subrahmanyam, K. R. V. Kaza, G. V. Brown, and C. Lawrence, Nonlinear Vibration and Stability of Rotating Pretwisted, Preconed Blades Including Coriolis Effects, Journal of Aircraft, vol. 24, no. 5, pp. 342-352, 1987.
48. J. Shaw and S. W. Shaw, Instabilities and Bifurcations in a Rotating Shaft, Journal of Sound and Vibration, vol. 132, no. 2, pp. 227-244, 1989.
49. L. Librescu, W. Lin, M. P. Nemeth, and Jr., J. H. Starnes, Vibration of Geometrically Imperfect Panels Subjected to Thermal and Mechanical Loads, Journal of Spacecraft and Rockets, vol. 33, no. 2, March-April, pp. 285-291, 1996.
50. L. Librescu, W. Lin, M. P. Nemeth, and Jr., J. H. Starnes, Frequency-Load Interaction of Geometrically Imperfect Curved Panels Subjected to Heating, AIAA Journal, vol. 34, no. 1, January, pp. 166-177, 1996.
51. L. Librescu and M. A. Souza, in Effects of Eccentric Stiffening on Static and Dynamic Nonlinear Response of Rectangular Panels Exposed to Thermomechanical Loading, in Advanced in the Mechanics of Plates and Shells, D. Durban, D. Givoli and J. G. Simmonds (eds.), Kluwer Academic Publishers Dordrecht, pp. 197-212, 2001.
52. L. Librescu, Elastostatics and Kinetics of Anisotropic and Heterogeneous Shell Type Structures, Noordhoff International Publishing, Leyden, Netherlands, 1975.