Mesoscale analysis of shear bands in high strain rate deformations of tungsten/nickel-iron composites

Journal of Thermal Stresses

Volumn 28, Issue 6-7, 2005, Pages 747-782

  Batra, R C ^a   Love, B M ^a  

^a State University   (United States)

Author keywords

Finite element solution; Mesoscale analysis; Microporous materials; Particulate composite; Thermoviscoplasticity; Tungsten heavy alloys

Indexed keywords

COMPACTION; FINITE ELEMENT METHOD; HEAT CONDUCTION; HEAT FLUX; IRON ALLOYS; NICKEL ALLOYS; PLASTIC DEFORMATION; STRAIN RATE; TUNGSTEN ALLOYS; VISCOPLASTICITY;

MESOSCALE ANALYSIS; PARTICULATE COMPOSITES; THERMOVISCOPLASTICITY; TUNGSTEN HEAVY ALLOYS;

COMPOSITE MATERIALS;

EID: 19944381882     PISSN: 01495739     EISSN: None     Source Type: Journal    
DOI: 10.1080/01495730590932724     Document Type: Article

References (57)

1. Y. L. Bai and B. Dodd, Adiabatic Shear Localization: Occurence, Theories, and Applications, Pergamon Press, Oxford, 1992.
2. T. W. Wright, The Physics and Mathematics of Adiabatic Shear Bands, Cambridge University Press, Cambridge, 2002.
3. P. Perzyna (ed.), Localization and Fracture Phenomenon in Inelastic Solids, Springer-Verlag, 1998.
4. R. C. Batra and H. M. Zbib (eds.), Material Instabilities: Theory and Applications, ASME Press, 1994.
5. Y. Tomita, Simulation of Plastic Instabilities in Solid Mechanics, Appl. Mechs. Revs., vol. 47, pp. 171-205, 1994.
6. R. Armstrong, R. C. Batra, M. Meyers, and T. W. Wright, Shear Instabilities and Viscoplasticity Theories, Mechs. of Materials, vol. 17, pp. 83-328, 1994.
7. R. C. Batra, Y. D. S. Rajapakse, and A. Rosakis, Failure Mode Transitions Under Dynamic Loading, Int. J. of Fracture, vol. 101, pp. 1-180, 2000.
8. H. M. Zbib, T. Shawki, and R. C. Batra, Material Instabilities, Appl. Mech. Rev., vol. 45, pp. 1-173, 1992.
9. R. C. Batra and B. M. Love, Adiabatic Shear Bands in Functionally Graded Materials, J. Thermal Stresses, vol. 27, pp. 1101-1123, 2004.
10. M. Zhou, A. Needleman, and R. J. Clifton, Finite Element Simulations of Dynamic Shear Localization, J. Mech. Phys. Solids, vol. 42, pp. 423-458, 1994.
11. M. Zhou and R. J. Clifton, Dynamic Constitutive and Failure Behavior of a Two-Phase Tungsten Composite, J. Appl. Mech., vol. 64, pp. 487-494, 1997.
12. A. Bose, H. Congue, and J. Lankford Jr., Influence of Microstructure on Shear Localization in Tungsten Heavy Alloys, in A. Bose and R. J. Dowding (eds.), Proceedings of the First International Conference on Tungsten and Tungsten Alloys, pp. 291-298, November 15-18, Metal Powder Industries Federation, Arlington, VA, 1992.
13. D. K. Kim, S. Lee, and H. S. Song, Effect of Tungsten Particle Shape on Dynamic Deformation and Fracture Behavior of Tungsten Heavy Alloys, Metall. Mater. Trans. A, vol. 29, pp. 1057-1069, 1998.
14. Z. Wei, J. Yu, J. Li, Y. Li, and S. Hu, Influence of Stress Condition on Adiabatic Shear Localization of Tungsten Heavy Alloys, Int. J. Impact Eng., vol. 26, pp. 843-852, 2001.
15. R. D. Dick, V. Ramachandran, J. D. Williams, R. W. Armstrong, W. H. Holt, and W. Mock, Jr., Dynamic Deformation of W7Ni3Fe Alloy via Reverse-Ballistic Impact, in A. Crowson and E. S. Chen (eds.), Tungsten and Tungsten Alloys Recent Advances, pp. 269-276, The Minerals, Metals & Materials Society, 1991.
16. J. B. Stevens and R. C. Batra, Adiabatic Shear Bands in the Taylor Impact Test for a WHA Rod, Int. J. Plasticity, vol. 14, pp. 841-854, 1998.
17. R. C. Batra and J. B. Stevens, Adiabatic Shear Bands in Axisymmetric Impact and Penetration Problems, Computer Methods in Appl. Mechs. and Eng'g., vol. 151, pp. 325-342, 1998.
18. R. C. Batra and N. M. Wilson, Adiabatic Shear Bands in Plane Strain Deformations of a WHA, Int. J. Plasticity, vol. 14, pp. 43-60, 1998.
19. M. Zhou, The Growth of Shear Bands in Composite Microstructures, Int. J. Plasticity, vol. 14, pp. 733-754, 1998.
20. N. Charalambakis and T. Baxevanis, Adiabatic Shearing of Non-Homogeneous Thermoviscoplastic Materials, Int. J. Plasticity, vol. 20, pp. 899-914, 2004.
21. R. C. Batra and N. A. Jaber, Failure Mode Transition in an Impact Loaded Prenotched Plate with Four Thermoviscoplastic Relations, Int. J. Fracture, vol. 110, pp. 47-71, 2001.
22. A. L. Gurson, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I, J. of Engr. Mater, and Tech., vol. 99, pp. 2-15, 1977.
23. V. Tvergaard, Influence of Voids on Shear Band Instabilities Under Plane Strain Conditions, Int. J. Fracture, vol. 17, pp. 389-407, 1981.
24. G. R. Johnson and W. H. Cook, A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain-Rates, and High Temperatures, Proc. 7th Int'l. Symp. on Ballistics, pp. 541-547, 1983.
25. C. Chu and A. Needleman, Void Nucleation in Biaxially Stretched Sheets, J. Engr. Mat. Tech., vol. 102, pp. 249-256, 1980.
26. V. Tvergaard and A. Needleman, Analysis of the Cup-Cone Fracture in a Round Tensile Bar, Acta Metallurgica, vol. 32, pp. 157-169, 1984.
27. B. Budiansky, Thermal and Thermoelastic Properties of Isotropic Composites, J. Composite Materials, vol. 4, pp. 701-744, 1990.
28. C. Cattaneo, A Form of the Heat Equation which Eliminates the Paradox of Instantaneous Propagation, CR Acad. Sci., vol. 247, pp. 431-433, 1958.
29. P. Vernotte, The True Heat Equation, CR Acad. Sci., vol. 247, p. 2103, 1958.
30. R. C. Batra and M. H. Lear, Adiabatic Shear Banding in Plane Strain Tensile Deformations of 11 Thermoviscoplastic Materials with Finite Wave Speed, Int. J. Plasticity, vol. 21, pp. 1521-1545, 2005.
31. R. C. Batra and L. Chen, Instability Analysis and Shear Band Spacing in Gradient-Dependent Thermoviscoplastic Materials with Finite Speeds of Thermal Waves, Archives of Mechanics, vol. 53, pp. 167-192, 2001.
32. R. C. Batra, On Heat Conduction and Wave Propagation in Non-Simple Rigid Solids, Letters in Appl. and Engng. Sci., vol. 3, pp. 97-107, 1975.
33. R. C. Batra and C. H. Kim, Effect of Viscoplastic Flow Rules on the Initiation and Growth of Shear Bands at High Strain Rates, J. Mech. Phys. Solids, vol. 38, pp. 859-874, 1990.
34. R. C. Batra and L. Chen, Effect of Viscoplastic Relations on the Instability Strain, Shear Band Initiation Strain, the Strain Corresponding to Maximum Shear Band Spacing, and the Band Width in a Thermoviscoplastic Material, Int. J. Plasticity, vol. 17, pp. 1465-1489, 2001.
35. R. C. Batra, Steady State Penetration of Thermoviscoplastic Targets, Comp. Mechs., vol. 3, pp. 1-12, 1988.
36. S. R. Bodner and Y. Partom, Constitutive Equations for Elastic-Viscoplastic Strain-Hardening Materials, J. Appl. Mech., vol. 56, pp. 385-389, 1975.
37. T. J. R. Hughes, The Finite Element Method, Linear Static and Dynamic Finite Element Analysis, Prentice Hall, Englewood Cliffs, 1987.
38. R. C. Batra and D. Rattazzi, Adiabatic Shear Banding in a Thick-Walled Steel Tube, Comp. Mechs., vol. 20, pp. 412-426, 1997.
39. A. Marchand and J. Duffy, An Experimental Study of the Formation Process of Adiabatic Shear Bands in a Structural Steel, J. Mechs. Phys. Solids, vol. 36, pp. 251-283, 1988.
40. R. C. Batra and C. H. Kim, Analysis of Shear Bands in Twelve Materials, Int. J. Plasticity, vol. 8, pp. 425-452, 1992.
41. R. C. Batra, Finite Plane Strain Deformations of Rubberlike Materials, Int. J. Numer. Meth. Eng'g., vol. 15, pp. 145-160, 1980.
42. R. C. Batra and X. Q. Liang, Finite Deformations of Smart Structures, Comp. Mechs., vol. 20, pp. 427-438, 1997.
43. R. C. Batra and B. M. Love, Crack Propagation due to Brittle and Ductile Failures in Microporous Thermoelastoviscoplastic Functionally Graded Materials, Engineering Fracture Mechanics, (in press).
44. T. C. Chiu and F. Erdogan, One-Dimensional Wave Propagation in a Functionally Graded Medium, J. Sound and Vibration, vol. 222, pp. 453-487, 1999.
45. A. Molinari and R. J. Clifton, Analytical Characterization of Shear Localization in Thermoviscoplastic Materials, J. Appl. Mech., vol. 54, pp. 806-812, 1987.
46. B. M. Love and R. C. Batra, Determination of Effective Thermomechanical Parameters of a Mixture of Two Elastothermoviscoplastic Constituents. (to be submitted).
47. L. H. Dai, L. F. Liu, and Y. L. Bai, Formation of Adiabatic Shear Bands in Metal Matrix Composites, Int. J. Solids and Structures, vol. 41, pp. 5979-5993, 2004.
48. R. C. Batra, The Initiation and Growth of, and the Interaction Among Adiabatic Shear Bands in Simple and Dipolar Materials, Int. J. Plasticity, vol. 3, pp. 75-89, 1987.
49. R. C. Batra and C. H. Kim, Adiabatic Shear Banding in Elastic-Viscoplastic Nonpolar and Dipolar Materials, Int. J. Plasticity, vol. 6, pp. 127-141, 1990.
50. R. C. Batra and C. H. Kim, The Interaction Among Adiabatic Shear Bands in Simple and Dipolar Materials, Int. J. Engng. Sci., vol. 28, pp. 927-942, 1990.
51. Y. W. Kwon and R. C. Batra, Effect of Multiple Initial Imperfections on the Initiation and Growth of Adiabatic Shear Bands in Nonpolar and Dipolar Materials, Int. J. Engng. Sci., vol. 26, pp. 1177-1187, 1988.
52. R. C. Batra and Y. W. Kwon, Adiabatic Shear Banding in a Bimetallic Body, Acta Mechanica, vol. 77, pp. 281-297, 1989.
53. R. C. Batra and K. I. Ko, Analysis of Shear Bands in Dynamic Axisymmetric Compression of a Thermoviscoplastic Cylinder, Int. J. Engng. Sci., vol. 31, pp. 529-547, 1993.
54. R. C. Batra, Effect of Material Parameters on the Initiation and Growth of Adiabatic Shear Bands, Int. J. Solids and Structures, vol. 23, pp. 1435-1446, 1987.
55. R. C. Batra and J. Hwang, Dynamic Shear Band Development in Dipolar Thermoviscoplastic Materials, Computational Mechs., vol. 12, pp. 354-369, 1994.
56. A. G. Considerè, Memiore Sur L'emploi du fer et de L'acier dans les constructions, Annals des Pontset Chaussees, vol. 9, pp. 574-775, 1885.
57. R. C. Batra and Z. G. Wei, Shear Bands Due to Heat Flux Prescribed at Boundaries, Int. J. Plasticity (in press, available online).