On the relation between surface texture and gloss of injection-molded pigmented plastics

Polymer Engineering and Science

Volumn 45, Issue 10, 2005, Pages 1343-1356

  Ariño, Ingrid ^a   Kleist, Ulf ^a   Mattsson, Lars ^b   Rigdahl, Mikael ^c  

^a VOLVO CAR CORPORATION   (Sweden)

^b ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^c CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

APPROXIMATION THEORY; GEOMETRY; GLOSS MEASUREMENT; INJECTION MOLDING; REFRACTIVE INDEX; SURFACE TOPOGRAPHY;

GLOSSMETERS; INCIDENT ANGLES; INJECTION-MOLDED PLASTICS; SURFACE TEXTURE;

POLYMER BLENDS;

EID: 19844367647     PISSN: 00323888     EISSN: None     Source Type: Journal    
DOI: 10.1002/pen.20393     Document Type: Article

References (46)

1. R.S. Hunter and R.W. Harold, The Measurement of Appearance, John Wiley & Sons Inc., New York (1987).
2. H.B. Westlund and G.W. Meyer, ACM SIGGRAPH Conference on Computer Graphics, Los Angeles, CA, 501 (2001).
3. ASTM E 284, Standard Terminology of Appearance, American Society for Testing and Materials, Philadelphia (1999).
4. R.S. Hunter, NBS Research Paper RP 958, 18(77), 281 (1937).
5. ASTM D 2457, Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics, American Society for Testing and Materials, Philadelphia (1997).
6. R. Alexander-Katz and R.G. Barrera, J. Polym. Sci. B, 36, 1321 (1998).
7. E. Méndez, E. Barrera, R. Alexander-Katz, and R. Barrera, Physica A, 207, 137 (1994).
8. T.R. Lettieri, E. Marx, J.-F. Song, and T.V. Vorburger, Appl. Opt., 30(30), 4439 (1991).
9. M.P. Cook and K. Thomas, Polym. Test., 9, 233 (1990).
10. ASTM C 346, Test Method for 45 Degree Specular Gloss of Ceramic Materials, American Society for Testing and Materials, Philadelphia (1998).
11. TAPPI T480, Specular Gloss of Paper and Paperboard at 75 Degrees, Technical Association of the Pulp and Paper Industry, Atlanta (1992).
12. M. Nieto-Vesperinas, Scattering and Diffraction in Physical Optics, John Wiley & Sons Inc., New York (1991).
13. J. Bennett and L. Mattsson, Introduction to Surface Roughness and Scattering, 2nd ed., Opt. Soc. Am., Washington D.C. (1999).
14. L. Wang, T. Huang, M.R. Kamal, A.D. Rey, and J. The, Polym. Eng. Sci., 40(3), 747 (2000).
15. K. Resch, G. Wallner, C. Teichert, M. Gahleitner, and W. Binder, 6th Austrian Polymer Meeting, Vienna, Austria (2003).
16. I. Ariño, U. Kleist, G.G. Barros, P.-Å. Johansson, and M. Rigdahl, Polym. Eng. Sci., 44(9), 1615 (2004).
17. M. Klüppel and G. Heinrich, Rubber Chem. Technol., 73, 578 (2000).
18. ISO 4287, Geometrical Product Specifications (GPS) - Surface Texture: Profile Method - Terms, Definitions and Surface Texture Parameters, British Standard Institute, London (1998).
19. T.R. Thomas, Rough Surfaces, Imperial College Press, London (1999).
20. E. Andreassen and Å. Larsen, Polym. Eng. Sci., 42(5), 1082 (2002).
21. P. Beckmann and A. Spizzichino, The Scattering of Electromagnetic Waves From Rough Surfaces, Artech House Inc., Norwood (1987).
22. J.A. Ogilvy, Theory of Wave Scattering From Random Rough Surfaces, Adam Hilger, Great Britain (1991).
23. A. Voronovich, Wave Scattering From Rough Surfaces, Springer, Berlin (1999).
24. H. Granberg, J. Jensen, and L. Mattsson, Opt. Eng., 42, 2384 (2003).
25. S. Van Gils, S. Holten, E. Stijns, M. Vancaldehoven, H. Terryn, and L. Mattsson, Surface and Interface Analysis, 35, 121 (2003).
26. J.W.S. Rayleigh, The Theory of Sound, Dover Publishers, New York (1945).
27. J. Ingers, "Electromagnetic Scattering From Surface Roughness - A Comparison Between Theory and Experiment, Ph.D. Thesis, Royal Institute of Technology (KTH), Stockholm, Sweden (1991).
28. J.M. Soto-Crespo and M. Nieto-Vesperinas, J. Opt. Soc. Am. A, 7(7), 1185 (1990).
29. G.R. Valenzuela, Colloquium on Radio Oceanography, Dordrecht, Hamburg, Germany (1976).
30. E.L. Church, H.A. Jenkinson, and J.M. Zavada, Opt. Eng., 18(2), 125 (1979).
31. J.M. Elson, J.P. Rahn, and B.J.M., Appl. Opt., 22(20), 3207 (1983).
32. E.L. Church and P.Z. Takacs, Proc. SPIE, 2541, 91 (1995).
33. H.E. Bennett and J.O. Porteus, J. Opt. Soc. Am., 51(2), 123 (1961).
34. M.E. Nadal and E. Ambler Thompson, J. Coating Tech.. 72(911), 61 (2000).
35. K. Huff, Visual Assessment and Practical Colorimetry in the Plastics Industry, Bayer AG, Leverkusen, Germany (1994).
36. R.S. Berns, Billmeyer and Saltzman's Principles of Color Technology, John Wiley & Sons Inc., New York (2000).
37. H.G. Völz, Industrial Color Testing: Fundamentals and Techniques, Wiley-VCH, Weinheim, Germany (1995).
38. R. McDonald, Colour Physics for Industry, Society of Dyers and Colourists, Bradford, Great Britain (1997).
39. J. Brandrup, E.H. Immergut, and E.A. Grulke, Polymer Handbook, John Wiley & Sons Inc., New York (1999).
40. S. Musikant, Optical Materials: An Introduction to Selection and Application, Marcel Dekker, New York (1986).
41. I. Ariño, U. Kleist, and M. Rigdahl, Polym. Eng. Sci., 44(1), 141 (2004).
42. L. Mattsson and P. Wågberg, Precission Eng., 15(3), 141 (1993).
43. ASTM D 523, Standard Test Method for Specular Gloss, American Society for Testing and Materials, Philadelphia (1999).
44. V.A. Gonzalez, M. Alanís, C. Guerrero, and U. Ortiz, J. Polym. Sci. B, 42, 646 (2003).
45. E. N. Dalal and K. M. Natale-Hoffman, Color Res. Appl., 24 (5), 369 (1999).
46. I. Ariño, U. Kleist, and M. Rigdahl, Polym. Eng. Sci., 45(5), 733 (2005).