The ability of PEO to remove model colloidal extractives from solutions with different types of fines

Nordic Pulp and Paper Research Journal

Volumn 19, Issue 1, 2004, Pages 59-66

  Mosbye, John ^a   Moe, Størker ^b   Tammelin, Tekla ^c   Saarinen, Terhi ^c   Laine, Janne ^c  

^a Norske Skog   (Norway)

^b NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

^c AALTO UNIVERSITY   (Finland)

Author keywords

Adsorption; CPAM; Dissolved carbohydrates; Fines; Mechanical pulp; PEO; Suface properties

Indexed keywords

ADSORPTION; CRYSTAL STRUCTURE; EVAPORATION; ION EXCHANGE; THERMOMECHANICAL PULP; WOOD;

CPAM; DISSOLVED CARBOHYDRATES;

POLYETHYLENE OXIDES;

ADSORPTION; COMPONENTS; CRYSTAL STRUCTURE; EVAPORATION; FINES; ION EXCHANGE; WOOD RESIN;

EID: 1942539257     PISSN: 02832631     EISSN: None     Source Type: Journal    
DOI: 10.3183/npprj-2004-19-01-p059-066     Document Type: Article

References (47)

1. Attia, Y.A. and Rubio, J. (1975): Determination of very low concentrations of polyacrylamid and polyethyleneoxide flocculants by nephelometry, Br. Polym. J. 7, 135.
2. Brandal, J. and Lindheim, A. (1966): The influence of extractives in groundwood pulp on fibre bonding, Pulp Paper Can. 67(10), T431.
3. Carignan, A., Gamier, G. and Van de Ven, T. G. M. (1998): The flocculation of fines by PEO/cofactor retention aid systems, J. Pulp Paper Sci. 24(3), 94.
4. Chaplin, M.F. and Kennedy, J.F. (1986): In "Carbohydrate analysis - a practical approach" 1st ed. IRL Press Limited, Oxford, p. 2.
5. Ekman, R. and Holmbom, B. (1989): Analysis by gas chromatography of wood extractives in pulp and water samples from mechanical pulping of spruce, Nordic Pulp Paper Res. J.4(1), 16.
6. Fellers, C., Bäckström, M. and Htun, M. (1998): Paper-to-paper friction - paper structure and moisture, Nordic Pulp Paper Res. J. 13(3), 225.
7. Fengel, D. and Wegener, G. (1989): In "Wood: chemistry, ultrastructure, reactions", 1st ed. Walter de Gruyter, Berlin, p. 115-117.
8. Holmbom, B. and Örså, F. (1993): Methods for analysis of dissolved and colloidal wood components in papermaking process waters effluents, 7th Int. Symp. Wood Pulping Chem., Beijing, 2, 810.
9. Höök, F., Rodahl M., Brzezinski, P. and Kasemo, B. (1998): Energy dissipation kinetics for protein and antibody-antigen adsorption under shear oscillation on a quartz crystal microbalance, Langmuir 14(4), 729.
10. Jacobs, F. A. (1995): Extractives in process waters from newsprint papermaking (TMP), Doctoral thesis, Royal Inst. of Techn., Stockholm, Sweden.
11. Kekkonen, J., Laukkanen, A., Stenius, P. and Tenhu, H. (2002): Adsorption of polymeric additives and their effect on the deposition of wood materials in paper production, Colloids Surfaces A, accepted for publication.
12. Kleen, M., Räsänen, H., Ohra-aho, T. and Laine, C. (2001): Surface chemistry of TMP fibers and fines, 11th Int. Symp. Wood Pulp. Chem., Nice, 1, 258.
13. Knutsen, S. H., Moe, S. T., Larsen, B. and Grasdalen, H. (1993): Molecular cutoff values of dialysis membrane for alginate and kappa-carrageenan oligosaccharides, Hydrobiologia 260/261, 667.
14. Laine, J., Stenius, P., Carlsson, G. and Ström, G. (1994): Surface characterization of unbleached kraft pulps by means of ESCA, Cellulose 1 (2), 145.
15. Lindström, T. and Glad-Nordmark, G. (1983): Selective adsorption, flocculation, and fractionation of wood pulps with polyethylene oxide, J. Colloidal Interface Sci. 94(2), 404.
16. Luukko, K. and Paulapuro, H. (1999): Development of fines quality in the TMP process, Pulp Paper Res. Sci. 25(8), 273.
17. Luukko, K., Kemppainen-Kajola, P. and Paulapuro, H. (1997): Characterization of mechanical pulp fines by image analysis, Appita J. 50(5), 387.
18. Luukko, K., Laine, J. and Pere, J. (1999): Chemical characterization of different mechanical pulp fines, Appita J. 52(2), 126.
19. Mosbye, J., Laine, J. and Moe, S. (2003): The effect of dissolved substances on the adsorption of colloidal extractives to fines in mechanical pulp, Nordic Pulp Paper Res. J. 18(1), 63.
20. Mosbye, J., Moe, S. and Laine, J. (2002): The charge and chemical composition of fines in mechanical pulp, Nordic Pulp Paper Res. J. 17(3), 356.
21. Nelson, N. (1944): A photometric adaptation of the somogyi method for the determination of glucose, Meth. Carbohydr. Chem. (1), 375.
22. Nurmi, M. and Eklund, D. (2000): Effect of cationic polyacrylamide on colloidal wood resin, Paperi Puu 82(5), 331.
23. Nylund, J., Lagus, O. and Eckerman, C. (1994): Character and stability of colloidal substances in a mechanical pulp suspension, Colloids and surfaces A: Physicochem. Eng. Aspects 85, 81.
24. Nylund, J., Sundberg, K., Shen, Q. and Rosenholm, J. B. (1998): Determination of surface energy and wettability of wood resins, Colloids Surf. A: Physicochem. Eng. Asp. 133, 261.
25. Peng, F. and Johansson, L. (1996): Characterization of mechanical pulp fibres, J. Pulp Paper Sci. 22(7), J252.
26. Picaro, T. and Van de Ven, T. G. M. (1995); The flow of dilute polyethylene oxide solutions through packed beds of pulp fibres, J. Pulp Paper Sci. 21 (1), J13.
27. Rodahl, M. and Kasemo, B. (1996): A simple setup to simultaneously measure the resonant frequency and the absolute dissipation factor of a quartz crystal microbalance, Rev. Sci. Instrum. 67(9), 3238.
28. Rodahl, M., Höök, F. and Kasemo, B. (1996): QCM operation in liquids: an explanation of measured variations in frequency and Q factor with liquid conductivity, Anal. Chem. 68(13), 2219.
29. Rodahl, M., Höök, F., Krozer, A., Brzezinski, P. and Kasemo, B. (1995): Quartz crystal microbalance setup for frequency and Q-factor measurements in gaseous and liquid environments, Rev. Sci. Instrum. 66(7), 3924.
30. Rundlöf, M. (1996): Quality of fines of mechanical pulp, Licentiate of Engineering Thesis, Royal Inst. of Technol., Stockholm, Sweden.
31. Rundlöf, M. (2002): Interaction of dissolved substances with fines of mechanical pulp - Influence on sheet properties and basic aspects of adhesion, Doctoral thesis, Royal Inst. of Techn., Stockholm, Sweden.
32. Rundlöf, M., Eriksson, M., Ström, H. and Wågberg, L. (2002b): Effect of mannanase and lipase on the properties of colloidal wood extractives and their interaction with mechanical pulp fines, Cellulose 9(2), 127.
33. Rundlöf, M., Htun, M., Höglund, H. and Wågberg, L. (2000a): The importance of the experimental method when evaluating the quality of fines of mechanical pulps, Pulp Paper Res. Sci. 26(9), 301.
34. Rundlöf, M., Htun, M., Höglund, H. and Wågberg, L. (2000b): Mechanical pulp fines of poor quality - characteristics and influence of white water, Pulp Paper Res. Sci. 26(9), 308.
35. Rundlöf, M., Sjölund, A-K., Ström, H. and Åsell, I. (2002a): The effect of dissolved and colloidal substances released from TMP on the properties of TMP fines, Nordic Pulp Paper Res. J. 15(4), 256.
36. Shen, W., Parker, I. H. and Sheng, Y. J. (1998): The effects of surface extractives and lignin on the surface energy of eucalypt kraft pulp fibres, J. Adhesion Sci. Technol. 12(2), 161.
37. Sundberg, A., Ekman, R., Holmbom, B., Sundberg, K. and Thornton, J. (1993): Interactions between dissolved and colloidal substances and a cationic fixing agent in mechanical pulp suspensions, Nordic Pulp Paper Res. J. 8(1), 226.
38. Sundberg, A., Holmbom, B., Willför, S. and Pranovich, A. (2000): Weakening of paper strength by wood resin, Nordic Pulp Paper Res. J. 15(1), 46.
39. Sundberg, A., Sundberg, K., Lillandt, C. and Holmbom, B. (1996c): Determination of hemicelluloses and pectins in wood and pulp fibres by acid methanolysis and gas chromatography, Nordic Pulp Paper Res. J. 11(4), 216.
40. Sundberg, K., Petterson, C., Eckerman, C. and Holmbom, B. (1996a): Preparation and properties of a model dispersion of colloidal wood resin from Norway spruce, J. Pulp Paper Sci. 22(7), J248.
41. Sundberg, K., Thornton, J., Holmbom, B. and Ekman, R. (1996b): Effects of wood polysaccharides on the stability of colloidal wood resin, J. Pulp Paper Sci. 22(7), J226.
42. Thornton, J., Ekman, R., Holmbom, B. and Örså, F. (1994): Polysaccharides dissolved from Norway spruce in thermomechanical pulping and peroxide bleaching, J. Wood Chem.Technol. 14(2), 159.
43. Van de Ven, T. G. M. (2000): A model for the adsorption of polyelectrolytes on pulp fibers: relation between fiber structure and polyelectrolyte properties, Nordic Pulp Paper Res. J. 15(5), 494.
44. Van de Ven, T. G. M. and Alince, B. (1996): Association-induced polymer bridging, new insights into the retention of fillers with PEO, J. Pulp Paper Sci. 22(7), J257.
45. Wood, J.R. and Karnis, A. (1996): Determination of the specific surface area of mechanical pulp fines from turbidity measurements, Paperi Puu 78(4), 181.
46. Wågberg, L. and Kolar, K. (1996): Adsorption of cationic starch on fibres from mechanical pulps, Ber. Bunsenges Phys. Chem. 100(6), 984.
47. Wågberg, L. and Ödberg, L. (1991): The action of cationic polyelectrolytes used for the fixation of dissolved and colloidal substances, Nordic Pulp Paper Res. J. 6(3), 127.