Computations of multiphase flows with surface tension using an adaptive finite element method

Numerical Heat Transfer; Part A: Applications

Volumn 40, Issue 4, 2001, Pages 335-362

  Dufour, Steven ^a,b   Pelletier, Dominique ^b  

^a UNIVERSITY OF WYOMING   (United States)

^b ÉCOLE POLYTECHNIQUE DE MONTRÉAL   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 1942521740     PISSN: 10407782     EISSN: None     Source Type: Journal    
DOI: 10.1080/104077801753238149     Document Type: Article

References (44)

1. X. Liu and J. H. Lienhard V, The Hydraulic Jump in Circular Jet Impingement and in Other Thin Liquid Films, Experiments in Fluids, vol. 15, pp. 108-116, 1993.
2. T. Aihara, J. K. Kim, and S. Maruyama, Effects of Temperature-Dependent Fluid Properties on Heat Transfer Due to an Axisymmetric Impinging Gas Jet Normal to a Flat Surface, Wärme-und Stoffübertragung, vol. 25, pp. 145-153, 1990.
3. R. E. Nickell, R. I. Tanner, and B. Caswell, The Solution of Viscous Incompressible Jet and Free-Surface Flows Using Finite-Element Methods, J. Fluid Mech., vol. 65, pp. 189-206, 1974.
4. J. M. Floryan and H. Rasmussen, Numerical Methods for Viscous Flows with Moving Boundaries, in A. K. Metzner (ed.), Applied Mechanics Review, vol. 42, pp. 323-341, ASME, New York, 1989.
5. K. R. Reddy and R. I. Tanner, Finite Element Solution of Viscous Jet Flows with Surface Tension, Computers and Fluids, vol. 6, pp. 83-91, 1978.
6. B. J. Omodei, On the Die-Swell of an Axisymmetric Newtonian Jet, Computers and Fluids, vol. 8, pp. 275-289, 1980.
7. A. Fortin, Y. Demay, and J.-F. Agassant, Computation of Stationary Interface Between Generalized Newtonian Fluids, Rev. Eur. Éléments Finis, vol. 1, pp. 181-196, 1992.
8. E. Thompson, Use of Pseudo-Concentration to Follow Creeping Viscous Flows During Transient Analysis, Int. J. Numer. Methods Fluids, vol. 6, pp. 749-761, 1986.
9. C. W. Hirt and B. D. Nichols, Volume of Fluid (VOF) Method for the Dynamics of Free Boundaries, J. Comput. Phys., vol. 39, pp. 201-225, 1981.
10. S. Popinet and S. Zaleski, A Front-Tracking Algorithm for Accurate Representation of Surface Tension, Int. J. Numer. Methods Fluids, vol. 30, pp. 775-793, 1999.
11. J. Li, Y. Renardy, and M. Renardy, Numerical Simulation of Breakup of a Viscous Drop in Simple Shear Flow Through a Volume-of-Fluid Method, Phys. Fluids, vol. 12, pp. 269-282, 2000.
12. J.-F. Hétu, Y. Lauzé, and G. Salloum, Finite Element Simulation of Mould Filling Processes, in Proceedings of the CFD 94 Conference, pp. 443-450, Toronto, 1995.
13. S. Dufour and D. Pelletier, An Adaptive Finite Element Method for Incompressible Flows with Interfaces, in Proceedings of the 29th AIAA Fluid Dynamics Conference, AIAA Paper 98-2969, American Institute of Aeronautics and Astronautics (AIAA), Albuquerque, NM, 1998.
14. S. Dufour and D. Pelletier, A Study of Drop Dynamics Using an Adaptive Finite Element Method, in Proceedings of the 14th AIAA Computational Fluid Dynamics Conference, AIAA Paper 99-3318, American Institute of Aeronautics and Astronautics (AIAA), Norfolk, VA, 1999.
15. S. Dufour, D. Pelletier, J.-F. Hétu, and A. García-Rejón, A Numerical Study of Multi-layer Flow Behavior inside Blow Molding Dies, in S. Kim (ed.), Proceedings of the 1996 First Joint Topical Conference on Processing, Structure and Properties of Polymeric Materials, pp. 166-168, American Institute of Chemical Engineers (AIChE) and Polymer Processing Society (PPS), American Institute of Chemical Engineers, New York, 1996.
16. A. Fortin, P. Carrier, and Y. Demay, Numerical Simulation of Coextrusion and Film Casting, Int. J. Numer. Methods Fluids, vol. 20, pp. 31-57, 1995.
17. L. P. Franca, S. L. Frey, and T. J. R. Hughes, Stabilized Finite Element Methods: I. Application to the Advective-Diffusive Model, Comput. Methods Appl. Mech. Engrg., vol. 95, pp. 253-276, 1992.
18. J. U. Brackbill, D. B. Kothe, and C. Zemach, A Continuum Method for Modeling Surface Tension, J. Comput. Phys., vol. 100, pp. 335-354, 1992.
19. J.-F. Hétu and D. Pelletier, Fast, Adaptive Finite Element Scheme for Viscous Incompressible Flows, AIAA J., vol. 30, pp. 2677-2682, 1992.
20. D. Pelletier, F. Ilinca, and J.-F. Hétu, Adaptive Remeshing for Convective Heat Transfer with Variable Fluid Properties, J. Thermophys. Heat Transfer, vol. 8, pp. 687-694, 1994.
21. L. Ignat, D. Pelletier, and F. Ilinca, An Adaptive Finite Element Method for Turbulent Heat Transfer, in Proceedings of the 34th Aerospace Sciences Meeting & Exhibit, AIAA Paper 97-0607, American Institute of Aeronautics and Astronautics (AIAA), Reno, NV, 1996.
22. F. Ilinca and D. Pelletier, A Unified Approach for Adaptive Solutions of Compressible and Incompressible Flows, in Proceedings of the 35th Aerospace Sciences Meeting & Exhibit, AIAA Paper 97-0330, American Institute of Aeronautics and Astronautics (AIAA), Reno, NV, 1997.
23. É. Turgeon, D. Pelletier, and F. Ilinca, Compressible Heat Transfer Computations by an Adaptive Finite Element Method, in Proceedings of the 37th AIAA Aerospace Sciences Meeting and Exhibit, AIAA Paper 99-0875, American Institute of Aeronautics and Astronautics (AIAA), Reno, NV, 1999.
24. E. Turgeon and D. Pelletier, Computation of Jet Impingement Heat Transfer by an Adaptive Finite Element Algorithm, in Proceedings of the 7th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, AIAA Paper 98-2585, American Institute of Aeronautics and Astronautics (AIAA), Albuquerque, NM, 1998.
25. O. C. Zienkiewicz and J. Z. Zhu, The Superconvergent Patch Recovery and A Posteriori Error Estimates, Part 1: The Recovery Technique, Int. J. Numer. Methods Eng., vol. 33, pp 1331-1364, 1992.
26. O. C. Zienkiewicz and J. Z. Zhu, The Superconvergent Patch Recovery and A Posteriori Error Estimates. Part 2: Error Estimates and Adaptivity, Int. J. Numer. Methods Eng., vol. 33, pp. 1365-1382, 1992.
27. J. T. Barth and J. A. Sethian, Numerical Schemes for the Hamilton-Jacobi and Level Set Equations on Triangulated Domains, J. Comput. Phys., vol. 145, pp. 1-40, 1998.
28. T. Tezduyar, S. Aliabadi, and M. Behr, Enhanced-Discretization Interface-Capturing Technique (EDICT) for Computation of Unsteady Flows with Interfaces, Comput. Methods Appl. Mech. Engrg., vol. 155, pp. 235-248, 1998.
29. B. Lafaurie, C. Nardone, R. Scardovelli, S. Zaleski, and G. Zanetti, Modelling Merging and Fragmentation in Multiphase Flows with SURFER, J. Comput. Phys., vol. 113, pp. 134-147, 1994.
30. D. Jacqmin, An Energy Approach to the Continuum Surface Tension Method, in Proceedings of the 34th Aerospace Sciences Meeting & Exhibit, AIAA Paper 96-0858, American Institute of Aeronautics and Astronautics (AIAA), Reno, NV, 1996.
31. M. J. Williams, D. B. Kothe, and E. G. Puckett, Convergence and Accuracy of Kernel-Based Continuum Surface Tension Models, Tech. Rep. LA-UR-98-2268, Los Alamos National Laboratory, Los Alamos, NM, 1998.
32. C. E. Weatherburn, On Differential Invariants in Geometry of Surfaces, with Some Applications to Mathematical Physics, The Quarterly Journal of Pure and Applied Mathematics, vol. 50, pp. 230-269, 1927.
33. C. Johnson, Numerical Solution of Partial Differential Equations by the Finite Element Method, Cambridge University Press, Cambridge, 1987.
34. L. P. Franca and S. L. Frey, Stabilized Finite Element Methods: II. The Incompressible Navier-Stokes Equations, Comput. Methods Appl. Mech. Engrg., vol. 99, pp. 209-233, 1992.
35. T. J. R. Hughes, M. Mallet, and A. Mizukami, A New Finite Element Formulation for Computational Fluid Dynamics: II. Beyond SUPG, Comput. Methods Appl. Mech. Engrg., vol. 54, pp. 341-355, 1986.
36. A. C. Galeão and E. G. D. do Carmo, A Consistent Approximate Upwind Petrov-Galerkin Method for Convection-Dominated Problems, Comput. Methods Appl. Mech. Engrg., vol. 68, pp. 83-95, 1988.
37. R. Codina, A Discontinuity-Capturing Crosswind-Dissipation for the Finite Element Solution of the Convection-Diffusion Equation, Comput. Methods Appl. Mech. Engrg., vol 110, pp. 325-342, 1993.
38. A. Béliveau, A. Fortin, and Y. Demay, A Two-Dimensional Numerical Method for the Deformation of Drops with Surface Tension, Int. J. of Computational Fluid Dynamics, vol. 10, pp. 225-240, 1998.
39. W. Layton and B. Polman, Oscillation Absorption Finite Element Methods for Convection-Diffusion Problems, SIAM J. Sci. Comput., vol. 17, pp. 1328-1346, 1996.
40. J. Peraire, M. Vahdati, K. Morgan, and O. C. Zienkiewicz, Adaptive Remeshing for Compressible Flow Computations, J. Comput. Phys., vol 72, pp. 449-466, 1987.
41. M. Fortin and A. Fortin, A Generalization of Uzawa's Algorithm for the Solution of the Navier-Stokes Equations, Communications in Applied Numerical Methods, vol. 1, pp. 205-208, 1985.
42. S. E. Navti, K. Ravindran, C. Taylor, and R. W. Lewis, Finite Element Modelling of Surface Tension Effects Using a Lagrangian-Eulerian Kinematic Description, Comput. Methods Appl. Mech. Engrg., vol. 147, pp. 41-60, 1997.
43. S. Dufour and D. Pelletier, An Adaptive Finite Element Method for Multiphase Flows with Surface Tension, in S. R. Idelsohn, E. Oñate, and E. N. Dvorkin (eds.), Computational Mechanics: New Trends and Applications, International Center for Numerical Methods in Engineering (CIMNE), Barcelona, Spain, 1998.
44. S. L. Goren and S. Wronaki, The Shape of Low-Speed Capillary Jets of Newtonian Liquids, J. Fluid Mech., vol. 25, pp. 185-198, 1966.