Process-oriented tolerancing for multi-station assembly systems

IIE Transactions (Institute of Industrial Engineers)

Volumn 37, Issue 6, 2005, Pages 493-508

  Ding, Yu ^a   Jin, Jionghua ^b   Ceglarek, Dariusz ^c   Shi, Jianjun ^d  

^a Department of Electrical and Computer Engineering   (United States)

^b University of Arizona   (United States)

^c Wisconsin Electric Machines and Power Electronics Consortium   (United States)

^d UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CONSTRAINT THEORY; INDUSTRIAL ENGINEERING; MATHEMATICAL MODELS; NONLINEAR CONTROL SYSTEMS; OPTIMIZATION; PRODUCT DESIGN; QUALITY CONTROL; REQUIREMENTS ENGINEERING; STATE SPACE METHODS; STATISTICAL PROCESS CONTROL;

DYNAMIC PROCESS EFFECTS; MULTI-STATION ASSEMBLY SYSTEMS; MULTI-STATION MANUFACTURING SYSTEMS; PIN-HOLE FIXTURE MECHANISM; PROCESS ORIENTED TOLERANCING; PRODUCTION SYSTEM; TOLERANCE VARIATION MODEL;

FLEXIBLE MANUFACTURING SYSTEMS;

EID: 19044395859     PISSN: 0740817X     EISSN: None     Source Type: Journal    
DOI: 10.1080/07408170490507774     Document Type: Article

References (49)

1. Agrawal, R., Lawless, J.F. and Mackay, R.J. (1999) Analysis of variation transmission in manufacturing processes - part II. Journal of Quality Technology, 31, 143-154.
2. Anon (1998) VSA-3D Release 12.5 User Manual, Variation System Analysis, Inc., St. Clair Shores, MI 48081.
3. Anon (1999) Optimization Toolbox User's Guide, Version 5, The Math-Works Inc., Natick, MA 01760.
4. Anon (2000) 3-D Variation Simulation, Dimensional Control Systems, Inc., Troy, MI 48084.
5. Archard, J.F. (1953) Contact and rubbing of flat surfaces. Journal of Applied Physics, 24, 981-988.
6. Ashiagbor, A., Liu, H.-C. and Nnaji, B.O. (1998) Tolerance control and propagation for the product assembly modeller. International Journal of Production Research, 36, 75-93.
7. Bjorke, O. (1989) Computer Aided Tolerancing, Tapir Publishers, Trondheim, Norway.
8. Cai, W., Hu, S.I. and Yuan, J.X. (1996) Deformable sheet metal fixturing: principles, algorithms, and simulations. Transactions of the ASME. Journal of Manufacturing Science and Engineering, 118, 318-324.
9. Camelio, A.J., Hu, S.J. and Ceglarek, D.J. (2001) Modeling variation propagation of multi-station assembly systems with compliant parts, Transactions of the ASME, Journal of Mechanical Design, 125, 673 681.
10. Ceglarek, D. and Shi, J. (1995) Dimensional variation reduction for automotive body assembly. Manufacturing Review, 8. 139-154.
11. Ceglarek, D. and Shi, J. (1997) Tolerance analysis for sheet metal assembly using a beam-based model. ASME Design Engineering Division Publication, 94, 153-159.
12. Ceglarek, D., Shi, J. and Wu, S.M. (1994) A knowledge-based diagnostic approach for the launch of the auto-body assembly process. Transactions of the ASME. Journal of Engineering for Industry, 116, 491-499.
13. Chase, K.W. and Parkinson, A.R. (1991) A survey of research in the application of tolerance analysis to the design of mechanical assemblies. Research in Engineering Design, 3, 23-37.
14. Choudhuri, S.A. and DeMeter, E.C. (1999) Tolerance analysis of machining fixture locators. Transactions of the ASME Journal of Manufacturing Science and Engineering, 121, 273-281.
15. Cunningham, T.W., Matripragada, R., Lee, D.J., Thornton, A.C. and Whitney, D.E. (1996) Definition, analysis, and planning of a flexible assembly process, in Proceedings of the 1996 Japan/USA Symposium on Flexible Automation, 2, pp. 767-778, Boston, MA.
16. Ding, Y., Ceglarek, D. and Shi, J. (2000) Modeling and diagnosis of multistage manufacturing process: part I state space model, in Proceedings of the 2000 Japan-USA Symposium on Flexible Automation, Ann Arbor, MI.
17. Djurdjanovic, D. and Ni, J. (2001) Linear state space modeling of dimensional machining errors. Transactions of NAMRI/SME, XXIX, 541-548.
18. Fainguelernt, D., Weill, R. and Bourdet, P. (1986) Computer aided tolerancing and dimensioning in process planning. Annals of the CIRP, 35 (1), 381-386.
19. Fraticelli, B.M.P., Lehtihet, E.A. and Cavalier, T.M. (1999) Tool-wear effect compensation under sequential tolerance control. International Journal of Production Research, 37, 639-651.
20. Jeang, A (1994) Tolerancing design: choosing optimal tolerance specifications in the design of machined parts. Quality and Reliability Engineering International, 10, 27-35.
21. Jensen, K.L. and Vardeman, S.B. (1993) Optimal adjustment in the presence of deterministic process drift and random adjustment error. Technometrics, 35, 376-389.
22. Jin, J. and Chen, Y. (2001) Quality and reliability information integration for design evaluation of fixture system reliability. Quality and Reliability Engineering International, 17, 355-372.
23. Jin, J. and Shi, J. (1999) State space modeling of sheet metal assembly for dimensional control. Transactions of the ASM Journal of Manufacturing Science & Engineering, 121, 756-762.
24. Lawless, J.F., Mackay, R.J. and Robinson, J.A. (1999) Analysis of variation transmission in manufacturing processes - part I. Journal of Quality Technology, 31, 131-142.
25. Lee, W.-J. and Woo, T.C. (1989) Optimum selection of discrete tolerances. Transactions of the ASME. Journal of Mechanisms, Transmissions, and Automation in Design, 111, 243-251.
26. Lee, W.-J. and Woo, T.C. (1990) Tolerances: their analysis and synthesis. Transactions of the ASME. Journal of Engineering for Industry, 112, 113-121.
27. Liu, S.C., Hu, S.J. and Woo, T.C. (1996) Tolerance analysis for sheet metal assemblies. Transactions of the ASME. Journal of Mechanical Design, 118, 62-67.
28. Mantripragada, R. and Whitney, D.E. (1999) Modeling and controlling variation propagation in mechanical assemblies using state transition models. IEEE Transactions on Robotics and Automation, 15, 124-140.
29. Mou, J. (1997) A systematic approach to enhance machine tool accuracy for precision manufacturing. International Journal of Machine Tools Manufacturing, 37, 669-685.
30. Ngoi, B.K.A. and Ong, C.T (1993) A complete tolerance charting system. International Journal of Production Research, 31, 453-469.
31. Ngoi, B.K.A. and Ong, C.T. (1998) Product and process dimensioning and tolerancing techniques: a state-of-the-art review. International Journal of Advanced Manufacturing Technology, 14, 910-917.
32. Ngoi, B.K.A. and Ong, J.M. (1999) A complete tolerance charting system in assembly. International Journal of Production Research, 37, 2477-2498.
33. Quesenberry, C.P. (1988) An SPC approach to compensating a tool-wear process. Journal of Quality Technology, 20, 220-229.
34. Rong, Y. and Bai, Y. (1996) Machining accuracy analysis for computer-aided fixture design verification. Transactions of the ASME. Journal of Manufacturing Science and Engineering, 118, 289-299.
35. Roy, U., Liu, C.R. and Woo, T.C. (1991) Review of dimensioning and tolerancing: representation and processing. Computer-Aided Design, 23, 466-483.
36. Shiu, B., Ceglarek, D. and Shi, J. (1996) Multi-station sheet metal assembly modeling and diagnostics. NAMRI/SME Transactions, XXIV, 199-204.
37. Slocum, A.H. (1992) Precision Machine Design, Prentice Hall, NJ.
38. Soons, J.A., Theuws, F.C. and Schellekens, P.H. (1992) Modeling the errors of multi-axis machines: a general methodology. Precision Engineering, 14, 5-19.
39. Suri, R. and Otto, K. (1999) Variation modeling for a sheet stretch forming manufacturing system. Annals of the CIRP. 48, 397-400.
40. Tang, L. C., Goh, C.J. and Lim, S.C. (1988) On the reliability of components subject to sliding wear - a first report. Sliding Wear, 22, 1177-1181.
41. Thurow, L. (1992) Head to Head: the Coming Economic Battle Among Japan, Europe, and America, Morrow, New York, NY.
42. Veitschegger, W.K. and Wu, C. (1986) Robot accuracy analysis based on kinematics. IEEE Journal of Robotics and Automation, 2, 171-179.
43. Voelcker, H.B. (1998) The current state of affairs in dimensional tolerancing. Integrated Manufacturing Systems, 9, 205-217.
44. Wallbridge, N.C. and Dowson, D. (1987) Distribution of wear rate data and statistical approach to sliding wear theory. Wear, 119, 295-312.
45. Whitney, D.E., Gilbert, O.L. and Jastrzebski, M. (1994) Representation of geometric variations using matrix transforms for statistical tolerance analysis in assemblies. Research in Engineering Design, 6, 191-210.
46. Wu, Z., ElMaraghy, W.H. and ElMaraghy, H.A. (1988) Evaluation of cost-tolerance algorithms for design tolerance analysis and synthesis. Manufacturing Review, 1, 168-179.
47. Zangwill, W.I. (1967) Nonlinear Programming: A Unified Approach, Prentice-Hall, Englewood Cliffs, NJ.
48. Zhang, G. (1996) Simultaneous tolerancing for design and manufacturing. International Journal of Production Research, 34, 3361-3382.
49. Zhang, H. (ed.) (1997) Advanced Tolerancing Techniques, J Wiley. New York, NY.