State-of-the-art and future trends in multiaxial fatigue assessment

Materialpruefung/Materials Testing

Volumn 47, Issue 5, 2005, Pages 260-266

  Marquis, Gary ^a,b  

^a Lappeenranta University of Technology ^*

^b LAPPEENRANTA UNIVERSITY OF TECHNOLOGY   (Finland)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SOFTWARE; CRACK PROPAGATION; DURABILITY; MATHEMATICAL MODELS; STRESS ANALYSIS; THERMOMECHANICAL TREATMENT;

MULTIAXIAL DAMAGE; MULTIAXIAL LOADING; PLASTIC STRAINS; STRESS STRAIN;

FATIGUE TESTING;

EID: 18844379150     PISSN: 00255300     EISSN: None     Source Type: Journal    
DOI: 10.3139/120.100661     Document Type: Conference Paper

References (74)

1. Brown, M. W.; Miller, K. J.: Two Decades of Progress in the assessment of Multiaxial Low-cycle Fatigue, in: Amzallag, C.; Leis, B. N.; Rabbe, P. (Eds.): Low-cycle Fatigue and Life Prediction, ASTM STP 770, ASTM (1982), pp. 482-499
2. Garud, Y. S.: Multiaxial Fatigue: A Survey of the State of the Art, J. Testing Eval. 9 (1981), pp. 165-178
3. Jordan, E. H.: Fatigue-Multiaxial Aspects, in: Zamrik, S. Y.; Dietrich, D. (Eds.): Pressure Vessel and Piping: Design Technology - 1982 - A Decade of Progress, ASME, New York (1982), pp. 507-518
4. Ellyin, F.; Valaire, B.: Development of fatigue Failure theories for multiaxial high strain conditions, SM Archives, Martinus Nijhoff Publishers, Dordrecht, 10, (1985), pp. 45-85
5. Brown, M. W. (Eds.): Multiaxial Fatigue, ASTM STP 853, Miller, ASTM, Philadelphia (1985)
6. Brown, M. W.; Miller, K. J. (Eds.): Biaxial and Multiaxial Fatigue, EGF Publication 3, Mechanical Engineering Publications, London (1989)
7. Kussmaul K. F.; McDiarmid, D. L.; Socie, D. F. (Eds.): Fatigue under Biaxial and Multiaxial Loading, EGF Publication 10, Mechanical Engineering Publications, London (1991)
8. Rossmanith, H. P.; Miller, K. J. (Eds.): Mixed-mode Fatigue and Fracture, ESIS Publication 14, Elsevier Science (1993)
9. McDowell, D. L.; Ellis, R. (Eds.): Advances in Multiaxial Fatigue, ASTM STP 1191, ASTM, Philadelphia (1993)
10. Pineau, A.; Galletaud, G.; Lindley, T. C. (Eds.): Multiaxial fatigue and design, ESIS Publication 21, Elsevier Science (1996)
11. Kalluri, S.; Bonacuse, P. J. (Eds.): Multiaxial Fatigue and Deformation Testing Techniques, ASTM STP 1280, ASTM, Philadephia (1997)
12. Macha, E.; Bedkowski, W.; Lagoda, T. (Eds.): Multiaxial Fatigue and Fracture, ESIS Publication 25, Elsevier Science (2000)
13. Kalluri, S.; Bonacuse, P. J. (Eds.): Multiaxial Fatigue and Deformation, ASTM STP 1387, ASTM, Philadephia (2000)
14. Carpenteri, A.; de Freitas, M.; Spagnoli, A. (Eds.): Biaxial/Multiaxial Fatigue and Fracture, ESIS Publication 31, Elsevier Science (2003)
15. Socie, D. F.; Marquis, G. B.: Multiaxial Fatigue, SAE, Warrendale, PA, (2000)
16. Mróz, Z.: On the description of anisotropic work hardening, J. Mech. Phy. Solids, 15 (1967), pp. 163-175
17. Chu, C. C.: The analysis of multiaxial cyclic problems with an anisotropic hardening model, Int. J. Solids and Structures, 23 (1987), pp. 569-579
18. McDowell, D. L.: An evaluation of recent developments in hardening and flow rules for rate-independent, nonproportional cyclic plasticity, J. Appl. Mech. (ASME), 54 (1987), pp. 323-334
19. Garud, Y. S.: A new approach to the evaluation of fatigue under multiaxial loadings, J. Engng. Mater. Technol. (ASME), 103 (1981), pp. 118-126
20. Armstrong, P. J.; Frederick, C. O.: A mathematical representation of the multiaxial Bauschinger effect, C.E.G.B Report RD/B/N 731.
21. Jiang, Y.; Sehitoglu, H.: Modeling of cyclic ratcheting plasticity, Part I: Development of constitutive equations, J. Appl. Mech. (ASME), 63 (1996), pp. 720-725
22. Jiang, Y.; Sehitoglu, H.: Modeling of cyclic ratcheting plasticity, Part II: Comparison of model simulations with experiments, J. Appl. Mech. (ASME), 63 (1996), pp. 726-733
23. Calloch, S.; Marquis, D.: Triaxial tension-compression tests for multiaxial cyclic plasticity, Int. I. Plasticity, 15 (1999)
24. Abdul-latif, A.; Clavel, M.; Ferney, V.; Saanouni, K.: On the modelling of nonproportional cyclic plasticity of waspaloy, J. Engng, Mat. Tech., 116 (1994)
25. Tanaka, E.: A nonproportionality parameter and memory effects of Isotropic hardening, Eur. J. Mech., 19 (1994), pp. 173-188
26. Aubin, V.; Quaegebeur, P.; Degallaix, S.: Cyclic behaviour of a duplex stainless steel under multiaxial loading: experiments and modelling, in: Carpenteri, A.; de Freitas M.; Spagnoli, A. (Eds.): Biaxial/Multiaxial Fatigue and Fracture, ESIS Publication 31, Elsevier Science (2003)
27. Dowling, N. E.; Brose, W. R.; Wilson, W. K.: in: Wetzel, R. M. (Ed.): Fatigue Under Complex Loading: Analysis and Experiments, SAE, Warrendale (1977)
28. Hoffmann, M.; Seeger, T.: A generalized method for estimating multiaxial elastic-plastic notch stresses and strains Part 1 : Theory, J. Engng. Mater. Technol. (ASME), 107(1985), pp. 250-254
29. Barkey, M. E.; Socie, D. F.; Hsia, K. J.: A yield surface approach to the estimation of notch strains for proportional and nonproportional cyclic loading, ASME I. Engng. Mat. Tech., 116 (1994)
30. Moftakhar, A.; Buczynski, A.; Glinka, G.: Elastic-plastic stress-strain calculation in notched bodies subjected to nonproportional loading, Int. J. Frac., 70 (1995), pp. 357-373
31. Buczinski, A.; Glinka, G.: Elastic-plastic stress-strain calculation in notched bodies subjected to cyclic non-proportional loading paths, in: Carpenteri, A.; de Freitas M.; Spagnoli, A. (Eds.): Biaxial/Multiaxial Fatigue and Fracture, ESIS Publication 31, Elsevier Science (2003)
32. Murakami, Y.; Takahashi, K.: Torsional fatigue of a medium carbon steel containing an initial small surface crack introduced by tension-compression fatigue: crack branching, non-propagation and fatigue limit, Fatigue Frac. Engng. Mat. Struc., 21 (1998), pp. 1473-1484
33. thBiennial Conf. Frac., ECF 12, EMAS publishing, UK, 1, pp. 67-72
34. st Int. Conf on Fatigue Crack Paths, Parma (2003)
35. st Int. Conf on Fatigue Crack Paths, Parma (2003)
36. Pook, L. P.: Crack Paths, WIT Press, Southampton (2002)
37. st Int. Conf on Fatigue Crack Paths, Parma (2003)
38. Ohji, K.; Tsuji, M.; Kubo, S.; Ono, Y.; Tawata, A.; Umei, K.: Trans. Jpn. Soc. Mech. Engrs., A59 (562) (1993), pp. 1429-1436
39. th Int. Conf. Biaxial/Multiaxial Fatigue and Frac., Vol. 2, (2001), p. 683
40. st Int. Conf on Fatigue Crack Paths, Parma (2003)
41. th Int. Conf. Biaxial/Multiaxial Fatigue and Frac., (2001)
42. Feltner, C. E.; Morrow, J.: Microplastic Strain Hysteresis Energy as a Criterion for Fatigue Fracture, J. Basic Enging., Trans. ASME, 83D (1961), pp. 15-22
43. Liu, K. C.: A method based on virtual strain-energy parameters for multiaxial fatigue life prediction, in: McDowell, D. L.; Ellis, R. (Eds.): Advances in Multiaxial Fatigue, ASTM STP 1191, ASTM, Philadelphia (1993), pp. 67-84
44. Chu, C.-C.; Conle, F. A.; Bonnen, I. F.: Multiaxial stress-strain modelling and fatigue life predictionof SAE axle shafts, in: McDowell, D. L.; Ellis, R. (Eds.): Advances in Multiaxial Fatigue, ASTM STP 1191, ASTM, Philadelphia (1993), pp. 37-54
45. Glinka, G.; Wang, G.; Plumtree, A.: Mean stress effects in multiaxial fatigue, Fatigue Frac. Engng. Mater. Struct., 18 (1995), pp. 755-764
46. Łagoda, T.; Macha, E.; Bedkowski, W.: A critical plane approach based on energy concepts:application to biaxial random tension-compression high cycle fatigue regime, Int. J. Fatigue 21 (1999)
47. Łagoda, T.; Macha, E.; Nieslony, A.; Morel, F.: Estimation of the fatigue life of high strength steel under variable-amplitude tension with torsion: use of the energy parameter in the critical plane, in: Carpenteri, A.; de Freitas M.; Spagnoli, A. (Eds.): Biaxial/Multiaxial Fatigue and Fracture, ESIS Publication 31, Elsevier Science (2003)
48. Varvani-Farahani, A.: A new energy-critical plane parameter for fatigue life assessment of various metallic materials subjected to in-phase and out-of-phase multiaxial fatigue loading conditions, Int. I. Fatigue, 22 (2000)
49. Varvani-Farahani, A.: Critical plane-energy based approach for assessment of biaxial fatigue damage where the stress-time axes are at different frequencies, in: Carpenteri, A., de Freitas M.; Spagnoli, A. (Eds.): Biaxial/Multiaxial Fatigue and Fracture, ESIS Publication 31, Elsevier Science (2003)
50. Bäckström, M.; Marquis, G.: A review of multiaxial fatigue of weldments: experimental results, design code and critical plane approaches, Fatigue Frac. Engng. Mater. Struct. 24 (2001)
51. th Int. Conf. Biaxial/Multiaxial Fatigue and Frac., Krakow, 1998
52. th Int. Conf. Biaxial/Multiaxial Fatigue and Fracture, DVM, Berlin, 2004
53. Sonsino, C. M. (ed.): Fatigue Frac. Engng. Mater. Struct, 24 (2001)
54. th Int. Conf. Biaxial/Multiaxial Fatigue and Fracture (2001)
55. Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings, ENV 1993-1-1, CEN (1992)
56. Hobbacher, A.: Fatigue design of welded joints and components, Recommendations of IIW Joint Working Group XIII-XV, Cambridge (1996)
57. Bäckström, M.; Marquis, G.: Evaluation of Interaction Equations for Multiaxial Loaded Welded Structures, Fatigue Frac. Engng. Mater. Struct 27 (2004)
58. Dang Van, K.: Sur la résistance à la fatigue des métaux, Sciences et Techniques de l'Armement, Mémorial de l'Artillerie Française, 3ème facicule (1973)
59. Dang Van, K.: Macro-micro approach in high-cycle multiaxial fatigue, Advances in Multiaxial Fatigue, ASTM STP 1191, in: McDowell, D. L.; Ellis, R. (Eds.): Advances in Multiaxial Fatigue, ASTM STP 1191, ASTM, Philadelphia (1993), pp. 120-130
60. Beranger, A.-S.; Berard, J.-V.; Vittori, J.-F.: A fatigue life assessment methodology for automotive components, in: Marquis, G.; Solin, J. (Eds.): Fatigue Design of Components, ESIS Publication 22, Elsevier (1997)
61. Bignonnet, A.: Personnal correspondence, PSA Peugeot-Citroën (1998)
62. FATIMAS data sheet, NCode Corporation, www.ncode.com
63. IMS virtual lab, IMS International, www.lmsintl.com
64. SAFE Technology home page, Safe Technology Ltd., www.safetechnology.com
65. FE-Fatigue data sheet, nCode Corporation, www.ncode.com
66. MSC Fatigue data sheet, MSC software corp., www.mscsoftware.com
67. th Int. Conf. Biaxial/Multiaxial Fatigue and Fracture, DVM, Berlin, 2004
68. th Int. Conf. Biaxial/Multiaxial Fatigue and Fracture, DVM, Berlin, 2004
69. James, M.; Swenson, D.: FRANC2D/L: A crack propagation simulator for plane layered structures, www.mne.ksu.edu/~franc2d/
70. Nykänen, T.: Fatigue crack growth simulations in laser-welded lap joints, Welding in the World, 43 (1999), S. 42-46
71. st Int. Conf on Fatigue Crack Paths, Parma (2003)
72. st Int. Conf on Fatigue Crack Paths, Parma (2003)
73. st Int. Conf on Fatigue Crack Paths, Parma (2003)
74. st Int. Conf on Fatigue Crack Paths, Parma (2003)