Morphological, thermal, barrier and mechanical properties of LDPE/EVOH blends in extruded blown films

Journal of Polymer Research

Volumn 11, Issue 1, 2004, Pages 75-83

  Huang, Chi Hsien ^a   Wu, Jiann Shing ^a   Huang, Chun Chin ^b   Lin, Li Shin ^c  

^a NATIONAL CHIAO TUNG UNIVERSITY   (Taiwan)

^b NATIONAL KAOHSIUNG UNIVERSITY OF APPLIED SCIENCES   (Taiwan)

^c Chang Chun Petrochemical Co Ltd   (Taiwan)

Author keywords

Blending; Blown film; EVOH; LDPE g MAH; Oxygen barrier

Indexed keywords

CRYSTALLIZATION; HEATING; LOW DENSITY POLYETHYLENES; MECHANICAL PERMEABILITY; MELTING; MORPHOLOGY; OXYGEN; PLASTIC FILMS; POLYVINYL ALCOHOLS; TEMPERATURE; TENSILE PROPERTIES; THERMOANALYSIS;

COMPATIBILIZER; MALEIC ANHYDRIDE; OXYGEN PERMEABILITY; STRESS INDUCED CRYSTALLIZATION;

POLYMER BLENDS;

EID: 1842728523     PISSN: 10229760     EISSN: None     Source Type: Journal    
DOI: 10.1023/B:JPOL.0000021796.41800.e9     Document Type: Article

References (36)

1. R. H. Foster Packaging, 32, 70 (1987).
2. T. Iwanami and Y. Hirai Tappi J., 66, 1404 (1983).
3. J. M. Lagaron, A. K. Powell and G. Bonner Polym. Test., 20, 569 (2001).
4. H. U. Beckmann and Ch. Herschbach, Kunst. Plast. Euro., 86, 5 (1996).
5. Z. Zhang, I. J. Britt and M. A. Tung Appl. Polym. Sci., 82, 1866 (2001).
6. J. A. Wachtel, B. C. Tsai and C. J. Farrell J. Plast. Eng., 41, 41 (1985).
7. B. C. Tsai and B. J. Jenkins J. Plast. Film Sheet., 4, 63 (1988).
8. T. Iwanami and Y. Hirai Tappi J., 66, 85 (1983).
9. G. W. Kamykowski J. Plast. Film Sheet., 16, 237 (2000).
10. P. M. Subramanian, Polym. Eng. Sci., 25, 483 (1985).
11. P. M. Subramanian and V. Mehra Polym. Eng. Sci., 27, 663 (1987).
12. S. Y. Lee and S. C. Kim Polym. Eng. Sci., 37, 463 (1997).
13. R. Gopalakrishnan, J. M. Schultz and R. M. Gohil J. Appl. Polym. Sci., 56, 1749 (1995).
14. M. R. Kamal, I. A. Jinnah and L. A. Utracki Polym. Eng. Sci., 24, 1337 (1984).
15. S. Y. Lee and S. C. Kim J. Appl. Polym. Sci., 68, 1245 (1998).
16. R. Gonzalez-Nunez, B. D. Favis, P. J. Carreau and C. Lavallee Polym. Eng. Sci., 33, 851 (1993).
17. K. Min, J. L. White and J. F. Fellers Polym. Eng. Sci., 24, 1327 (1984).
18. S. Wu Polym. Eng. Sci., 27, 335 (1987).
19. J. H. Yeo, C. H. Lee, C. S. Park, K. J. Lee, J. D. Nam and S. W. Kim Adv. Polym. Tech., 20, 191 (2001).
20. M. J. Folkes and P. S. Hope Polymer Blends and Alloys, Blackie Academic & Professional, London, 1993.
21. U. Sundararaj and C. W. Macosko Macromolecules, 28, 2647 (1995).
22. R. Fayt, R. Jerome and Ph. Teyssie J. Polym. Sci., Polym. Phys. Ed., 20, 2209 (1982).
23. C. C. Chen and J. L. White Polym. Eng. Sci., 33, 923 (1993).
24. R. Holsti-Miettinen, J. Seppala and O. T. Ikkala Polym. Eng. Sci., 32, 868 (1992).
25. L. E. Nielsen and R. F. Landel Mechanical Properties of Polymers and Composites, Marcel Dekker, New York, 1994.
26. C. E. Scott and C. W. Macosko, Polym. Eng. Sci., 35, 1938 (1995).
27. C. W. Macosko, P. Guegan, A. K. Khandpur, A. Nakayama, P. Marechal and T. Inoue Macromolecules, 29, 5590 (1996).
28. O. T. Ikkala, R. M. Holsti-Miettinen and J. Seppala J. Appl. Polym. Sci., 49, 1165 (1993).
29. H. S. Moon, B. K. Ryoo and J. K. Park J. Appl. Polym. Sci., 32, 1427 (1994).
30. H. Garmabi and M. R. Kamal J. Plast. Film Sheet., 15, 120 (1999).
31. Automatic Manometric Gas Permeability Tester Operator Manual, Model L100-5000, Lyssy AG, 2001.
32. R. Gopalakrishnan, J. M. Schultz and R. M. Gohil J. Appl. Polym. Sci., 56, 1749 (1995).
33. G. I. Taylor Proc. R. Soc. London Ser. A, 138, 41 (1932).
34. G. I. Taylor Proc. R. Soc. London Ser. A, 146, 501 (1934).
35. F. Avalos, M. Arroyo and J. P. Vigo J. Polym. Eng., 9, 158, (1990).
36. M. Joshi, S. N. Maiti and A. Misra Polym. Compos., 15, 349 (1994).