LOAD DISTRIBUTION IN CYLINDRICAL WORM GEARS

Proceedings of the ASME Design Engineering Technical Conference

Volumn 6, Issue , 2000, Pages 355-363

  Simon, Vilmos V ^a  

^a SZENT ISTVÁN UNIVERSITY   (Hungary)

Author keywords

hob oversize; load distribution; pressure; transmission error; worm gear

Indexed keywords

ELECTRIC POWER PLANT LOADS; ERRORS; GEAR MANUFACTURE; POINT CONTACTS; POWER TRANSMISSION; SPUR GEARS; WORM GEARS;

AXIAL DEFORMATIONS; CONTACT DEFORMATION; CYLINDRICAL WORM GEARS; HOB OVERSIZE; LOAD DISTRIBUTIONS; LOAD SHARING; MATING SURFACES; TOOTH ERRORS; TRANSMISSION ERROR; WORM-GEAR DRIVE;

GEAR TEETH;

EID: 1842722635     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/DETC2000/PTG-14400     Document Type: Conference Paper

References (26)

1. th International Power Transmission and Gearing Conference, San Diego, pp. 703-708.
2. Chen, J. S., Litvin, F. L., and Shabana, A. A., 1994, "Computerized Simulation of Meshing and Contact of Loaded Gear Drives", Proceedings, International Gearing Conference, Newcastle upon Tyne, pp. 161-166.
3. Cornell, R. W., 1981, "Compliance and Stress Sensitivity of Spur Gear Teeth", ASME Journal of Mechanical Design, Vol. 103, pp. 447-459.
4. Elkholy, A. H., 1985, "Tooth Load Sharing in High-Contact Ratio Spur Gears", ASME Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 107, pp. 11-16.
5. Gosselin, C., Gingras, D., Brousseau, J., and Gakwaya, A., 1994, "A Review of the Current Contact Stress and Deformation Fonnulations Compared to Finite Element Analysis", Proceedings, International Gearing Conference, Newcastle upon Tyne, pp. 155-160.
6. Greening, J. H., Barlow, R. J., and Loveless, W. G, 1980, "Load Sharing on the Teeth of Double Enveloping Wonn Gear", Proceedings, II International Power Transmission and Gearing Conference, San Francisco, Paper No. 80-C2/DET-43.
7. Kubo, A., 1981, "Estimation of Gear Perfonnance", Proceedings, International Symposium on Gearing and Power Transmissions, Tokyo, Vol. II, pp. 201-206.
8. Kurokawa, S., Ariura, Y., and Nakanishi, 1991, "Tooth Gearing Analysis of Cylindrical Gears", Pmceedings, JSME Internationa! Conference on Motion and Power Transmissions, Hiroshima, pp. 258-263'.
9. Litvin, F. L., 1972, Theoiy of Gear Mesh, Muszaki Konyvkiado, Budapest (in Hungarian).
10. Litvin, F. L., and Kin, V., 1992, "Computerized Simulation of Meshing and Bearing Contact for Single-Enveloping Worm-Gear Drives", ASME Journal of Mechanical Design, Vol. 114, pp. 313-316.
11. Litvin, F. L., 1994, Gear Geometty and Applied Theory, Prentice Hall, Englewood Cliffs, Nj.
12. Litvin, F. L., Seol, I. H., Kim, D., Lu, J., Wang, A. G, Egelja, A., and Zhao, X., 1996, "Kinematic and Geometric Models of Gear Drives", ASME Journal of Mechanical Design, Vol. 118, pp. 544-550.
13. Octme, M., 1988, "A New Method for Designing a Wonngear", AGMA Technical Paper 88FTM6, Alexandria, VA.
14. Seol, I. H., and Litvin, F. L., 1996, "Computerized Design, Generation and Simulation of Meshing and Contact of Modified Involute, Klingelnberg and Flender Type Worm-Gear Drives", ASME Journal of Mechanical Design, Vol. 118, pp. 551-555.
15. Simon, V., 1985, "The Influence of Hob Diameter on Wonn Gear Mesh", Symposium on Machine Design, Ohrid, Proceedings, pp. 49-64.
16. Simon, V., 1988, "Load and Stress Distribution in Spur and Helical Gears", ASME Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 110, pp. 197-202.
17. Simon, V., 1989, "Optimal Tooth Modifications for Spur and Helical Gears", ASME Journal of Mechanisms, Transmissions, and Automation in Design, Vol. Ill, pp. 611-615.
18. Simon, V., 1993, "Load Distribution in Double Enveloping Wonn Gears", ASME Journal of Mechanical Design, Vol. 115, pp. 496-501.
19. Simon, V., 1994, "A New Wonn Gear Drive with Ground Double Arc Profile", Mechanism and Machine Theoiy, Vol. 29, pp. 407-414.
20. Simon, V., 1995, "Tooth Contact Analysis of Mismatched Wonn Gears", Proceedings, Ninth World Congress on the Theoiy of Machines and Mechanisms, Milano, pp. 530-534.
21. Simon, V., 1996a, "Stress Analysis in Worm Gears with Ground Concave Wonn Profile", Mechanism and Machine Theoiy, Vol. 31, pp. 1121-1130.
22. Simon, V., 1996b, "Displacements in Worm Gears with Ground Concave Wonn Profile", Mechanism and Machine Theoiy, Vol. 31, pp. 1131-1140.
23. Simon, V., 1998, "Characteristics of a New Type of Cylindrical Wonn Gear Drive", Proceedings, 7th International Power Transmission and Gearing Conference, San Diego, 1996, pp. 703-708, ASME Journal of Mechanical Design, Vol. 120, pp. 139-146.
24. Steele, T. W., 1986, "Tooth Load Distribution on Large Marine Gears", Proceedings, 2nd World Congress on Gearing, Paris, pp. 723-731.
25. Tobe, T., and Inoue, K., 1980, "Longitudinal Load Distribution Factor for Straddle- and Overhang-Mounted Spur Gears", II International Power Transmission and Gearing Conference, San Francisco, Paper No. 80-C2/DET-45.
26. Winter, H., and Wilkesmann, H., 1981, "Calculation of Cylindrical Wonn Gear Drives of Different Tooth Profiles", ASME Journal of Mechanical Design, Vol. 103, pp. 73-81.