Robust topological design of cellular materials

Proceedings of the ASME Design Engineering Technical Conference

Volumn 2 A, Issue , 2003, Pages 659-672

  Seepersad, Carolyn Conner ^a   Allen, Janet K ^a   McDowell, David L ^a   Mistree, Farrokh ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Cellular materials; Design capability indices; Robust design; Topology design

Indexed keywords

DECISION SUPPORT SYSTEMS; ENERGY ABSORPTION; LIGHT WEIGHT STRUCTURES; MICROELECTROMECHANICAL DEVICES; OPTIMIZATION; SPECIFICATIONS; STIFFNESS MATRIX; TOPOLOGY;

CELLULAR MATERIALS; DESIGN CAPABILITY INDICES; ROBUST DESIGN; TOPOLOGY DESIGN;

PRODUCT DESIGN;

EID: 1842710020     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/detc2003/dac-48772     Document Type: Conference Paper

References (59)

1. Christie, D. E., 1976, Basic Topology, Macmillan, New York.
2. Mortenson, M. E., 1999, Mathematics for Computer Graphics Applications, 2nd Edition, Industrial Press, New York.
3. Davis, D. M., 2001, "Topology," Encyclopedia of Mathematics Education (L. S. Grinstein and S. J. Lipsey, Eds.), Routledge-Falmer, New York.
4. Sigmund, O., 2001, "Design of Multiphysics Actuators Using Topology Optimization - Part I: One-Material Structures," Computer Methods in Applied Mechanics and Engineering, Vol. 190, No. 49-50, pp. 6577-6604.
5. Frecker, M. I., G. K. Ananthasuresh, S. Nishiwaki, N. Kikuchi and S. Kota, 1997, "Topological Synthesis of Compliant Mechanisms Using Multi-Criteria Optimization," ASME Journal of Mechanical Design, Vol. 119, No. 2, pp. 238-245.
6. Frecker, M., N. Kikuchi and S. Kota, 1999, "Topology Optimization of Compliant Mechanisms with Multiple Outputs," Structural Optimization, Vol. 17, No. 4, pp. 269-278.
7. Eschenauer, H. A. and N. Olhoff, 2001, "Topology Optimization of Continuum Structures: A Review," Applied Mechanics Reviews, Vol. 54, No. 4, pp. 331-389.
8. Cochran, J. K., K. J. Lee, D. L. McDowell and T. H. Sanders, 2000, "Low Density Monolithic Honeycombs by Thermal Chemical Processing," Proceedings of the 4th Conference on Aerospace Materials, Processes, and Environmental Technology, Huntsville, AL.
9. Church, B. C., B. M. Dempsey, J. L. Clark, T. H. Sanders and J. K. Cochran, 2001, "Copper Alloys from Oxide Reduction for High Conductivity Applications," Proceedings of IMECE 2001, International Mechanical Engineering Congress and Exposition, New York.
10. Taguchi, G., 1986, Introduction to Quality Engineering, The Asian Productivity Organization, Tokyo.
11. Taguchi, G. and D. Clausing, 1990, "Robust Quality," Harvard Business Review, Vol. Jan/Feb, pp. 65-75.
12. Cagan, J. and B. C. Williams, 1993, "First-Order Necessary Conditions for Robust Optimality," ASME Advances in Design Automation, Albuquerque, NM, ASME DE-Vol. 65-1, pp. 539-549.
13. Otto, K. N. and E. K. Antonsson, 1993, "Tuning Parameters in Engineering Design," ASME Journal of Mechanical Design, Vol. 115, No. 1, pp. 14-19.
14. Otto, K. N. and E. K. Antonsson, 1993, "Extensions to the Taguchi Method of Product Design," ASME Journal of Mechanical Design, Vol. 115, No. 1, pp. 5-13.
15. Parkinson, A., C. Sorensen and N. Pourhassan, 1993, "A General Approach for Robust Optimal Design," ASME Journal of Mechanical Design, Vol. 115, No. 1, pp. 74-80.
16. Yu, J. and K. Ishii, 1994, "Robust Design by Matching the Design with Manufacturing Variation Patterns," ASME Design Automation Conference, Minneapolis, MM, ASME DE-Vol. 69-2, pp. 7-14.
17. Chen, W., J. K. Allen, D. Mavris and F. Mistree, 1996, "A Concept Exploration Method for Determining Robust Top-Level Specifications," Engineering Optimization, Vol. 26, No. 2, pp. 137-158.
18. Chen, W., J. K. Allen, K.-L. Tsui and F. Mistree, 1996, "A Procedure for Robust Design: Minimizing Variations Caused by Noise Factors and Control Factors," ASME Journal of Mechanical Design, Vol. 118, No. 4, pp. 478-485.
19. Su, J. and J. E. Renaud, 1997, "Automatic Differentiation in Robust Optimization," AIAA Journal, Vol. 35, No. 6, pp. 1072-1079.
20. Chen, W. and K. Lewis, 1999, "A Robust Design Approach for Achieving Flexibility in Multidisciplinary Design," AIAA Journal, Vol. 37, No. 8, pp. 982-989.
21. Cherkaev, A. and E. Cherkaeva, 1999, "Optimal Design for Uncertain Loading Conditions," Homogenization (V. Berdichevsky, V. Jikov and G. Papanicolaou, Eds.), World Scientific, pp. 193-213.
22. Mavris, D. N., O. Bandte and D. A. DeLaurentis, 1999, "Robust Design Simulation: A Probabilistic Approach to Multidisciplinary Design," Journal of Aircraft, Vol. 36, No. 1, pp. 298-307.
23. Ben-Haim, Y., 2001, Information-Gap Decision Theory: Decisions Under Severe Uncertainty, Academic Press, San Diego.
24. Bendsoe, M. P. and N. Kikuchi, 1988, "Generating Optimal Topologies in Structural Design Using a Homogenization Method," Computer Methods in Applied Mechanical Engineering, Vol. 71, pp. 197-224.
25. Bendsoe, M. P., 1989, "Optimal Shape Design as a Material Distribution Problem," Structural Optimization, Vol. 1, pp. 193-202.
26. Rozvany, G. I. N., 2001, "Aims, Scope, Methods, History, and Unified Terminology of Computer-Aided Topology Optimization in Structural Mechanics," Structural and Multidisciplinary Optimization, Vol. 21, pp. 90-108.
27. Diaz, A. and M. P. Bendsoe, 1992, "Shape Optimization of Structures for Multiple Loading Situations Using a Homogenization Method," Structural Optimization, Vol. 4, pp. 17-22.
28. Diaz, A., R. Lipton and C. A. Soto, 1995, "A New Formulation of the Problem of Optimum Reinforcement of Reissner-Mindlin Plates," Computer Methods in Applied Mechanics and Engineering, Vol. 123, pp. 121-139.
29. Christiansen, S., M. Patriksson and L. Wynter, 2001, "Stochastic Bilevel Programming in Structural Optimization," Structural and Multidisciplinary Optimization, Vol. 21, pp. 361-371.
30. Thampan, C. K. P. V. and C. S. Krishnamoorthy, 2001, "System Reliability-Based Configuration Optimization of Trusses," Journal of Structural Engineering, Vol. 127, No. 8, pp. 947-956.
31. Ben-Tal, A. and A. Nemirovski, 1997, "Robust Truss Topology Design via Semidefinite Programming," SIAM Journal of Optimization, Vol. 7, No. 4, pp. 991-1016.
32. Kocvara, M., J. Zowe and A. Nemirovski, 2000, "Cascading - An Approach to Robust Material Optimization," Computers and Structures, Vol. 76, pp. 431-442.
33. Chang, T. S., A. C. Ward, J. Lee and E. H. Jacox, 1994, "Conceptual Robustness in Simultaneous Engineering: An Extension of Taguchi's Parameter Design," Research in Engineering Design, Vol. 6, pp. 211-222.
34. Chang, T. S. and A. C. Ward, 1995, "Conceptual Robustness in Simultaneous Engineering: A Formulation in Continuous Spaces," Research in Engineering Design, Vol. 7, pp. 67-85.
35. Mistree, F., O. F. Hughes and B. A. Bras, 1993, "The Compromise Decision Support Problem and the Adaptive Linear Programming Algorithm," Structural Optimization: Status and Promise (M. P. Kamat, Ed.), AIAA, Washington, D.C., pp. 247-286.
36. Burns, S. A., Ed., 2002, Recent Advances in Optimal Structural Design, American Society of Civil Engineers, Reston, VA.
37. Chen, W., T. W. Simpson, J. K. Allen and F. Mistree, 1999, "Satisfying Ranged Sets of Design Requirements Using Design Capability Indices as Metrics," Engineering Optimization, Vol. 31, pp. 615-639.
38. Gibson, L. J. and M. F. Ashby, 1997, Cellular Solids: Structure and Properties, Cambridge University Press, Cambridge, UK.
39. Torquato, S., L. V. Gibiansky, M. J. Silva and L. J. Gibson, 1998, "Effective Mechanical and Transport Properties of Cellular Solids," International Journal of Mechanical Sciences, Vol. 40, No. 1, pp. 71-82.
40. Hyun, S. and S. Torquato, 2000, "Effective Elastic and Transport Properties of Regular Honeycombs for all Densities," Journal of Materials Research, Vol. 15, No. 9, pp. 1985-1993.
41. Evans, A. G., J. W. Hutchinson, N. A. Fleck, M. F. Ashby and H. N. G. Wadley, 2001, "The Topological Design of Multifunctional Cellular Materials," Progress in Materials Science, Vol. 46, No. 3-4, pp. 309-327.
42. Gu, S., T. J. Lu and A. G. Evans, 2001, "On the Design of Two-Dimensional Cellular Metals for Combined Heat Dissipation and Structural Load Capacity," International Journal of Heat and Mass Transfer, Vol. 44, No. 11, pp. 2163-2175.
43. Hayes, A. M., A. Wang, B. M. Dempsey and D. L. McDowell, 2001, "Mechanics of Linear Cellular Alloys," Proceedings of IMECE, International Mechanical Engineering Congress and Exposition, New York, NY.
44. Kumar, R. S. and D. L. McDowell, 2002, "Design of Multifunctional Materials," 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. Paper Number: AIAA-2002-5569.
45. Seepersad, C. C., B. M. Dempsey, J. K. Allen, F. Mistree and D. L. McDowell, 2002, "Design of Multifunctional Honeycomb Materials," 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, GA. Paper Number: AIAA-2002-5626.
46. Sigmund, O., 1994, "Materials with Prescribed Constitutive Parameters: An Inverse Homogenization Problem," International Journal of Solids and Structures, Vol. 31, pp. 2313-2329.
47. Sigmund, O., 1995, "Tailoring Materials with Prescribed Elastic Properties," Mechanics of Materials, Vol. 20, pp. 351-368.
48. Sigmund, O. and S. Torquato, 1997, "Design of Materials with Extreme Thermal Expansion Using a Three-Phase Topology Optimization Method," Journal of the Mechanics and Physics of Solids, Vol. 45, No. 6, pp. 1037-1067.
49. Sigmund, O. and S. Torquato, 1999, "Design of Smart Composite Materials Using Topology Optimization," Smart Materials and Structures, Vol. 8, No. 3, pp. 365-379.
50. Neves, M. M., H. Rodrigues and J. M. Guedes, 2000, "Optimal Design of Periodic Linear Elastic Microstructures," Computers and Structures, Vol. 76, No. 1-3, pp. 421-429.
51. Sigmund, O., 2000, "A New Class of Extremal Composites," Journal of the Mechanics and Physics of Solids, Vol. 48, No. 2, pp. 397-428.
52. Hyun, S. and S. Torquato, 2001, "Designing Composite Microstructures with Targeted Properties," Journal of Materials Research, Vol. 16, No. 1, pp. 280-285.
53. Neves, M. N., O. Sigmund and M. P. Bendsoe, 2002, "Topology Optimization of Periodic Microstructures with a Penalization of Highly Localized Buckling Modes," International Journal for Numerical Methods in Engineering, Vol. 54, pp. 809-834.
54. Reddy, J. N., 1993, An Introduction to the Finite Element Method, Second, McGraw-Hill, Boston.
55. Malvern, L. E., 1969, Introduction to the Mechanics of a Continuous Medium, Prentice-Hall, Upper Saddle River, NJ.
56. Nemat-Nasser, S. and M. Hori, 1999, Micromechanics: Overall Properties of Heterogeneous Materials, 2nd Edition, Elsevier, Amsterdam.
57. Cook, R. D., D. S. Malkus and M. E. Plesha, 1989, Concepts and Applications of Finite Element Analysis, 3rd Edition, John Wiley and Sons, New York.
58. van der Sluis, O., P. J. G. Schreurs, W. A. M. Brekelmans and H. E. H. Meijer, 2000, "Overall Behavior of Heterogeneous Elastoviscoplastic Materials: Effect of Microstructural Modeling," Mechanics of Materials, Vol. 32, pp. 449-462.
59. Svanberg, K., 1987, "The Method of Moving Asymptotes - A New Method for Structural Optimization," International Journal for Numerical Methods in Engineering, Vol. 24, pp. 359-373.