Fluid Dynamics of Finned Bodies - From VIV to FPSO

Proceedings of the International Offshore and Polar Engineering Conference

Volumn 12, Issue , 2002, Pages 1-11

  Yeung, Ronald W ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Fins; FPSO; Lock in; Motion attenuation; Roll damping; Vortex induced vibrations; Wave induced motion

Indexed keywords

BOUNDARY CONDITIONS; DAMPING; DIFFUSION; FLUID DYNAMICS; INTEGRAL EQUATIONS; MOTION CONTROL; SURFACE WAVES; VIBRATIONS (MECHANICAL); VISCOSITY;

FLOATING PRODUCTION STORAGE AND OFFLOADING (FPSO); LOCK-IN; MOTION ATTENUATION; ROLL DAMPING; VORTEX-INDUCED VIBRATIONS (VIV); WAVE-INDUCED MOTION;

OCEAN ENGINEERING;

EID: 1842584387     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (38)

1. 4", J. Fluid Mech., 61, 187.
2. 4; Part 2", J. Fluid Mech., 71, 145.
3. Choi, H., Kwon, K. (1996), "Control of laminar vortex shedding behind a circular cylinder using splitter plates", Phys. Fluids, 8, pp. 479-486.
4. Chorin, A. J. (1973). "Numerical study of slightly viscous flow", J. Fluid Mech., 57, pp. 785-796.
5. Chen, T., Chwang, A. and Zhang, D. (2000). "Large-eddy simulations for a free-surface turbulent flow past vertical cylinders", Proc. of 10th Int'l Offshore and Polar Engrg. Conf., Seattle, WA, vol. 3, pp. 60-67.
6. Cimbala, M., and Garg S. (1991), "Flow in the wake of a freely rotatable cylinder with splitter plate", J. AIAA, 29, pp. 1001-1002.
7. Cointe, R., Geyer, P., King, B., Molin, B., and Tramoni, M. (1991). "Nonlinear and linear motions of a rectangular barge in a perfect fluid", Proc. 18th Symp. on Naval Hydrodyn., Ann Arbor, Michigan.
8. Constantinides, Y. (2001). "Application of a random-vortex method in vortex-induced vibration", Report No. OEGG 2001-1, Ocean Engineering Graduate Group, Univ. of California at Berkeley.
9. Froude, W. (1863). "Remarks on Mr. Scott-Russell's paper on rolling", Transactions, Inst. of Naval Architects, 1863.
10. Gerrard, J. H. (1966). "The mechanics of the formation region of vortices behind bluff bodies", J. Fluid Mech., 25, pp. 401-413.
11. Gharib, M. R., Leonard, A., Gharib, M. and Roshko, A., (1998), " The absence of lock-in and the role of mass ratio", Proc. Conf. on Bluff Body Wakes and Vortex-Induced Vibrations, Washington, DC, Paper FEDSM98-5312.
12. Grosenbaugh, M. A. and Yeung, R. W. (1989). "Nonlinear free-surface flow at a two-dimensional bow", J. Fluid Mech., 209, pp. 57-75.
13. Himeno, Y. (1981). "Prediction of ship roll damping - state of the art" Dept. Naval Arch. and Mar. Engrg., Univ. of Michigan, Rep. no 239.
14. Halkyard, J. E. (1996). "Status of spar platforms for deepwater production systems", Proc. of Int'l Conf. Soc Offshore & Polar Engineers,96, Los Angeles.
15. Israeli, M. and Orszag, S. A. (1981). "Approximation of radiation boundary conditions", J. Comp. Phys., 41, pp. 115-135.
16. Huse, E., and Saether, L. K. (2001). "VIV excitation and damping of straked risers", Proc. 20th Int'l Conf. Offshore Mech. and Arctic Engrg, Paper OFT-1363, Rio de Janeiro, Brazil.
17. Kawai, H. (1990). "A discrete vortex analysis of flow around a vibrating cylinder with a splitter plate", J. Wind Engrg. and Indust. Aeronaut., 35, pp. 259-273.
18. Kawai, H. (1990). "A discrete vortex simulation for flow around a cylinder cylinder with a splitter plate", J. Wind Engrg. and Indust. Aeronaut., 33, pp. 153-160.
19. Kim, M. H., Arcandra, and Kim, Y. B. (2001). "Variability of spar motion analysis against design methodlogies/parameters" Proc. 20th Int'l Conf. on Offshore Mech. and Arctic Engrg., Paper OMAE2001/OFT-1064, Rio de Janeiro, Brazil.
20. Korpus, R. A. and Falzarano, J. M. (1997). "Prediction of viscous ship roll damping by unsteady Navier-Stokes techniques", J. ASME-OMAE, 119, pp. 108-113.
21. Martin, M. (1958). "Rolling damping due to bilge keels", Report prepared by the Iowa University Institute of Hydrolic research for the Office of Naval research under contract No. 1611 (01).
22. Maskell, S. J. and Ursell F. (1970). "The transient motion of a floating body", J. Fluid Mech., 44 pp. 303-313.
23. Matsuura, M., Nishigaki, M., Yamaguchi, Y., Mizokami, S., &; Yano, S. (2001). "A new concept of motion suppression board attached to bottom end of floating structures", Proc. 20th Int'l Conf. Offshore Mech. and Arctic Engrg. Paper OMAE2001/OFT-5106, Rio de Janeiro, Brazil.
24. Naciri, M. and Lledo, N. (2001). "Non-linear low frequency excitation of a rectangular barge", Proc. 20th Int'l Conf. Offshore Mech. and Arctic Engrg. Paper OMAE2001/OFT-1247, Rio de Janeiro, Brazil.
25. Newman, D. J. and Karniadakis G. E. (1997). "A direct numerical simulation study of flow past a freely vibration cable," J. Fluid Mech., 344, pp. 95-136.
26. Poldervaart, L. Mong, H., and Wanvik, L. (2000). "FPDSO - An FPSO with drilliing for complete standalone deep water development", Proc. Deep Offshore Technology Conference, Nov 2000, New Orleans, LA.
27. Ridjanovic, M. (1962). "Drag coefficient of flat plates oscillating normally to their planes", Schiffstechnik, 9, Heft 45.
28. Roddier, D., Liao, S.-W., and Yeung, R. W. (2000). "On freely-floating cylinders fitted with bilge keels", Proc. 10th Int'l Offshore and Polar Engrg. Conf., Seattle, Washington, 3, pp. 377-384.
29. Roshko, A. (1955). "On the wake and drag of bluff bodies", J. Aerosp. Sci., 22, pp. 124.
30. Sherwin, S. J. and Karniadakis, G. E. (1996). "Tetrahedral hp finite elements: Algorithms and flow solutions.", J. of Computational Physics, 1, No 24, pp. 14-45.
31. Wehausen, J. V. (1971). "The motion of floating bodies", Ann. Review Fluid Mech., 3, pp. 237-268.
32. Yeung, R. W. (1982). "Numerical methods in free-surface flows", Ann. Rev. Fluid Mech., 14, pp. 395-442.
33. Yeung, R. W. and Wu, C.-F. (1991). "Viscosity effects on the radiation hydrodynamics of horizontal cylinders", J. Offshore Mech. and Arctic Engrg., 113, pp. 334-343.
34. Yeung, R. W. and Ananthakrishnan, P. (1992). "Oscillation of a floating body in a viscous fluid", J. Engrg. Math., 26, pp. 211-230.
35. Yeung, R. W. and Vaidhyanathan, M. (1994). "Highly separated flows near a free surface", Proc. Int'l. Conf. on Hydrodyn., Wuxi, China.
36. Yeung, R. W. and Cermelli, C. A. (1998). "Vortical flow Generated by a plate rolling in a free surface", Free Surface Flow with Viscosity, Advances in Fluid Mechanics, vol. 16, ed. P. Tyvand, Computational Mechanics Publications, Southampton, England.
37. Yeung, R. W., Liao S.-W., and Roddier D. (1998). "Hydrodynamic coefficients of rolling rectangular cylinders", Int 'l J. Offshore and Polar Engrg., 8, No 4, pp. 241-250.
38. Yeung R. W., Roddier, D., Liao, S.-W., Alessandrini, B. and Gentaz, L. (2000). "On roll hydrodynamics of cylinders fitted with bilge keels", Proc. 2lst Symp. on Naval Hydrodyn., Rouen, France, pp. 143-160.