CBN tool wear modeling in finish hard turning

American Society of Mechanical Engineers, Manufacturing Engineering Division, MED

Volumn 14, Issue , 2003, Pages 193-200

  Huang, Yong ^a   Liang, Steven Y ^b  

^a South   (United States)

^b GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Crater wear; Flank wear; Hard turning; Tool wear

Indexed keywords

ABRASION; ADHESION; CUBIC BORON NITRIDE; CUTTING TOOLS; DATA PROCESSING; DIFFUSION; MATHEMATICAL MODELS; OPTIMIZATION; STRESS ANALYSIS; THERMAL EFFECTS; THERMOPLASTICS; TURNING;

CRATER WEAR; FLANK WEAR; HARD TURNING; TOOL WEAR;

MECHANICAL ENGINEERING;

EID: 1842538576     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/IMECE2003-42165     Document Type: Conference Paper

References (27)

1. Konig, W., Hochschule, T., Komanduri, R., Schenectady, D., and Tonshoff, H. K., 1984, "Machining of Hard Materials," Annals of CIRP, 33(2), pp. 417-427.
2. Konig, W., Berktold, A., and Koch, K.F., 1993, "Turning vs. Grinding," Annals of CIRP, 42(1), pp. 39-43.
3. Tonshoff, H.K., Arendt, C., and Ben Amor, R., 2000, "Cutting of Hardened Steel," Annals of CIRP, 49(2), pp. 547-566.
4. Turley, D.M., 1974, "A Scanning Electron Microscopy Study of Attrition Wear in Tungsten Carbide Pin Reamers," Wear, 77, pp. 259-266.
5. Moore, D.F., 1975, Principles and Application of Tribology, Pergamon Press, Oxford.
6. Chou, Y., and Barash, M.M., 1995, "Review on Hard Turning and CBN Cutting Tools," SME Technical Paper, MR95-214, pp. 1-12.
7. Huang, Y., 2002, "Predictive Modeling of Tool Wear Rate with Application to CBN Hard Turning," Ph.D. thesis, Georgia Institute of Technology, Atlanta, GA.
8. Rabinowicz, E., Dunn, L.A., and Russell, P.G., 1961, "A Study of Abrasive Wear under Three-Body Conditions," Wear, 4, pp. 345-355.
9. Archard, J.F., 1953, "Contact and Rubbing of Flat Surfaces," J. of App. Phy., 24, pp. 981-988.
10. Shaw, M.C., and Dirke, S.O., 1956, "On the Wear of Cutting Tools," Microtechnic, 10(4), pp. 187-193.
11. Kannatey-Asibu, E. Jr., 1985, "A Transport-diffusion Equation in Metal Cutting and Its Application to Analysis of the Rate of Flank Wear," J. of Eng. for Ind., 107, pp. 81-89.
12. Loladze, T.N., "Of the Theory of Diffusion Wear," Annals of CIRP, 30(1), 1981, pp. 71-76.
13. Usui, E., Shirakashi, T. and Kitagawa, T., 1978, "Analytical Prediction of Three Dimensional Cutting Process, Part 3: Cutting Temperature and Crater Wear of Carbide Tool," J. of Eng. for Ind., 100, pp. 236-243.
14. Kramer, B.M., and Judd, P.K., 1985, "Computational Design of Wear Coating," J. Vac. Sci. Technol., A3(6), pp. 2439-2444.
15. Kramer, B.M., 1986, "Predicted Wear Resistances of Binary Carbide Coatings," J. Vac. Sci. Technol., A4(6), pp. 2870-2873.
16. Huang, Y., and Liang, S.Y., 2001, "Modeling of Cutting Forces under Hard Turning Condition Considering Tool Wear Effect," submitted to ASME J. of Manufacturing Sci. and Eng. (Revised).
17. Dawson, T., 2002, "Machining Hardened Steel with Polycrystalline Cubic Boron Nitride Cutting Tools," Ph.D. thesis, Georgia Institute of Technology, Atlanta, GA.
18. Trigger, K. J., and Chao, B. T., 1956, "The Mechanisms of Crater Wear of Cemented Carbide Tools," Trans. ASME, 78, pp. 1119-1126.
19. Huang, Y., and Liang, S.Y., 2002, "Modeling of CBN Tool Flank Wear in Finish Hard Turning," submitted to ASME J. of Manufacturing Sci. and Eng. (Accepted)
20. Huang, Y., and Liang, S.Y., 2002, "Modeling of CBN Tool Crater Wear in Finish Hard Turning," submitted to Int. J. of Advanced Manufacturing Technology (Accepted)
21. Tlusty, J., 2000, Manufacturing Processes and Equipment, Prentice Hall, Upper Saddle River, NJ.
22. Childs, T.H.C., Maekawa, K., Obikawa, T., and Yamane, Y., 2000, Metal Machining: Theory and Applications, John Wiley & Sons Inc., New York, NY.
23. Huang, Y., and Liang, S.Y., 2002, "Cutting Forces Modeling Considering the Effect of Tool Thermal Property-Application to CBN Hard Turning," Int. J. of Machine Tools and Manufacture, 43(3), pp. 307-315.
24. Huang, Y., and Liang, S.Y., 2002, "Modeling of Cutting Temperature Distribution under Tool Flank Wear Effect," submitted to J. of Mech. Eng. Sci.
25. Tay, A. O., Stevenson, M. G., and de Vahl Davis, G., 1974, "Using the Finite Element Method to Determine Temperature Distributions in Orthogonal Machining," Proc. Inst. Mech. Engineers, 188, pp. 627-638.
26. Li, X., 1997, "Development of a Predictive Model for Stress Distributions at the Tool-Chip Interface in Machining," J. of Materials Processing Tech., 63, pp. 169-174.
27. Chou, Y., 1994, "Wear Mechanism of Cubic Boron Nitride Tools in Precision Turning of Hardened Steels," Ph.D. dissertation, Purdue University, West Lafayette, IN.