Modeling fluid-solid thermomechanical interactions in casting processes

International Journal of Numerical Methods for Heat and Fluid Flow

Volumn 14, Issue 2, 2004, Pages 167-186

  Cruchaga, Marcela A ^a   Celentano, Diego J ^a   Lewis, Roland W ^b  

^a UNIVERSIDAD DE SANTIAGO DE CHILE   (Chile)

^b SWANSEA UNIVERSITY   (United Kingdom)

Author keywords

Fluid dynamics; Metallurgy; Metals

Indexed keywords

FINITE ELEMENT METHOD; FLUID DYNAMICS; HEAT TRANSFER; MATHEMATICAL MODELS; MICROSTRUCTURE; NATURAL CONVECTION; SOLIDIFICATION; THERMAL STRESS; VECTORS;

FLUID-SOLID THERMOMECHANICAL INTERACTIONS; MULTI-PHYSICS MODEL;

METAL CASTINGS;

CASTING; FLUID DYNAMICS; INDUSTRIAL APPLICATION; MATHEMATICAL MODELING; METALLURGY; THERMODYNAMICS;

EID: 1842535444     PISSN: 09615539     EISSN: None     Source Type: Journal    
DOI: 10.1108/09615530410513791     Document Type: Conference Paper

References (26)

1. Bellet, M., Decultieux, F., Ménaï, M., Bai, F., Levaillant, C., Chenot, J., Schmidt, P. and Svensspn, I. (1996), "Thermomechanics of the cooling stage in casting processes: three-dimensional finite element analysis and experimental validation", Metallurgical and Materials Transactions B, Vol. 27B, p. 81.
2. Celentano, D. (2001), "A large strain thermoviscoplastic formulation for the solidification of S.G. cast iron in a green sand mould", International Journal of Plasticity, Vol. 17, pp. 1623-58.
3. Celentano, D. (2002), "A thermomechanical model with microstructure evolution for aluminium alloys casting processes", International Journal of Plasticity, Vol. 18, pp. 1291-335.
4. Celentano, D. and Cruchaga, M. (1999), "A thermally coupled flow formulation with microstructure evolution for hypoeutectic cast iron solidification", Metallurgical and Materials Transactions B, Vol. 30B, pp. 731-44.
5. Celentano, D., Gunasegaram, D. and Nguyen, T. (1999), "A thermomechanical model for the analysis of light alloy solidification in a composite mould", International Journal of Solids and Structures, Vol. 36, pp. 2341-78.
6. Chow, P., Bailey, C., Cross, M. and Pericleous, K. (1995), "Integrated numerical modelling of the complete casting process", Modelling of Casting, Welding and Advanced Solidification Processes VII, The Minerals, Metals and Materials Society, pp. 213-21.
7. Cruchaga, M. and Celentano, D. (2000), "A finite element thermally coupled flow formulation for phase-change problems", International Journal for Numerical Methods in Fluids, Vol. 34, pp. 279-305.
8. Cruchaga, M. and Celentano, D. (2001), "A fixed-mesh finite element thermally coupled flow formulation for the analysis of melting processes", International Journal for Numerical Methods in Engineering, Vol. 51, pp. 1231-58.
9. Cruchaga, M. and Celentano, D. (2002), "Numerical analysis of thermally coupled flow problems with interfaces and phase-change effects", International Journal of Computational Fluid Dynamics, Vol. 16, pp. 247-62.
10. Cruchaga, M., Celentano, D. and Tezduyar, T. (2002a), "Computation of mould filling processes with a moving Lagrangian interface technique", Communications in Numerical Methods in Engineering, Vol. 18, pp. 483-93.
11. Cruchaga, M., Celentano, D. and Tezduyar, T. (2002b), "Computation of moving interface problems with the edge-traked interface locator technique", in Mang, H.A., Rammerstorfer, F.G. and Eberhardsteiner, J. (Eds), Proceedings of the V World Congress on Computational Mechanics, Vienna, Austria, CD-ROM.
12. Felicelli, S.D., Heinrich, J.C. and Poirier, D.R. (1998), "Three-dimensional simulations of freckles in binary alloys", Journal of Crystal Growth, Vol. 191, pp. 879-88.
13. Gu, J.P. and Beckermann, C. (1999), "Simulation of convection and macrosegregation in a large steel ingot", Metallurgical and Materials Transactions A, Vol. 30a, pp. 1357-66.
14. Guthrie, R.I.L. and Tavares, R.P. (1998), "Mathematical and physical modelling of steel flow and solidification in twin-roll/horizontal belt thin-strip casting machines", Applied Mathematical Modelling, Vol. 22, pp. 851-72.
15. Heinrich, J.C. and McBride, E. (2000), "Calculation of pressure in a mushy zone", International Journal for Numerical Methods in Engineering, Vol. 47, pp. 735-47.
16. Lewis, R. and Ravindran, K. (2000), "Finite element simulation of metal casting", International Journal for Numerical Methods in Engineering, Vol. 47, pp. 29-59.
17. Naterer, G.F. (1997), "Simultaneous pressure-velocity coupling in the two-phase zone solidification shrinkage in an open cavity", Modelling Simul. Mater. Sci. Eng., Vol. 5, pp. 595-613.
18. Nigro, N., Huespe, A. and Fachinotti, V. (2000), "Phasewise numerical integration of finite element method applied to solidification processes", International Journal of Heat and Mass Transfer, Vol. 43, pp. 1053-66.
19. Rappaz, M., Drezet, J.M. and Gremaud, M. (1999), "A new hot-tearing criterion", Metallurgical and Materials Transactions A, Vol. 30A, pp. 449-55.
20. Sobh, N., Huang, J., Haber, R.B., Tortorelli, D.A. and Hyland, R.W. Jr. (2000), "A discontinuous Galerkin model for precipitate nucleation and growth in aluminium alloy quench processes", International Journal for Numerical Methods in Engineering, Vol. 47, pp. 749-67.
21. Tezduyar, T. (2001), "Finite element methods for flow problems with moving boundaries and interfaces", Archives of Computational Methods in Engineering, Vol. 8, pp. 83-130.
22. Voller, V.R. (2000), "A model of microsegregation during binary alloy solidification", International Journal of Heat and Mass Transfer, Vol. 43, pp. 2047-52.
23. Voller, V.R. and Beckermann, C. (1999), "A unified model of microsegregation and coarsening", Metallurgical and Materials Transactions A, Vol. 30A, pp. 2183-9.
24. Vreeman, C.J. and Incropera, F.P. (2000), "The effect of free-floating dendrites and convection on macrosegregation in direct chill cast aluminum alloys. Part II: predictions for Al-Cu and Al-Mg", International Journal of Heat and Mass Transfer, Vol. 43, pp. 687-704.
25. Vreeman, C.J., Krane, M.J.M. and Incropera, F.P. (2000), "The effect of free-floating dendrites and convection on macrosegregation in direct chill cast aluminum alloys. Part I: model development", International Journal of Heat and Mass Transfer, Vol. 43, pp. 677-86.
26. Yun, M., Lokyer, S. and Hunt, J. (2000), "Twin roll casting of aluminium alloy", Materials Science and Engineering, Vol. A28, pp. 116-23.