Drying of solids in vacuum fluidized bed

Canadian Journal of Chemical Engineering

Volumn 80, Issue 3, 2002, Pages 376-385

  Kozanoglu, Bulent Umur ^a   Vilchez, Juan Antonio ^b   Casal, Joaquim ^b   Arnaldos, Josep ^b  

^a UNIVERSIDAD DE LAS AMÉRICAS PUEBLA   (Mexico)

^b UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

Author keywords

Drying; Fluidization; Modelling; Parametric analysis; Vacuum

Indexed keywords

DRYING; MATHEMATICAL MODELS; PRESSURE EFFECTS; SOLIDS;

INTERPARTICULAR RESISTANCE; VACUUM FLUIDIZED BEDS;

FLUIDIZED BEDS;

DRYING; FLUIDIZED BED; LIQUID-SOLID SEPARATION; VACUUM;

ARTICLE; ATMOSPHERIC PRESSURE; ENERGY BALANCE; FLOW RATE; FLUIDIZATION; FLUIDIZED BED; GAS; HEAT; ION EXCHANGE; MATHEMATICAL ANALYSIS; MATHEMATICAL MODEL; MOISTURE; PARTICLE SIZE; SOLID; TEMPERATURE; THERMAL CONDUCTIVITY; THERMODYNAMICS; VACUUM; VELOCITY; WATER VAPOR;

EID: 1842469947     PISSN: 00084034     EISSN: None     Source Type: Journal    
DOI: 10.1002/cjce.5450800306     Document Type: Article

References (34)

1. th International Fluidization Conference", L.-S. Fan and T.M. Knowlton, Eds., Durango, Co., May 17-22, 1998, Engineering Foundation, New York, NY (1998), pp. 709-716.
2. Arnaldos, J. and J. Casal, "Prediction of Transition Velocities and Hydrodynamical Regimes in Fluidized Beds", Powder Technol. 86, 285-298 (1996).
3. Broadhurst, T.E. and H.A. Becker, "Onset of Fluidization and Slugging in Beds of Uniform Particles", AIChE J. 21, 238-249 (1975).
4. Chandran, A.N., S.S. Rao and Y.B.G. Varma, "Fluidized Bed Drying of Solids", AIChE J. 36, 29-38 (1990).
5. Ciesielczyk, W., "Analogy of Heat and Mass Transfer During Constant Rate Period in Fluidized Bed Drying", Drying Technol. 14, 217-230 (1996).
6. Crank, J., "The Mathematics of Diffusion", Clarendon Press, Oxford, UK (1956).
7. Fletcher, J.V., M.D. Deo and F.V. Hanson, "Fluidization of a Multisized Group B Sand at Reduced Pressure", Powder Technol. 76, 141-147 (1993).
8. Fuchs, G. and A. Zeller, "Vacuum Fluidized Bed Drying of Granular Powders in Pharmaceuticals Production", Pharm. Ind. 54, 881-885 (1992).
9. Germain, B. and B. Claudel, "Fluidization at Mean Pressures less than 30 Torr", Powder Technol. 13, 115-121 (1976).
10. Glicksman, L., T. Yule and A. Dyrness, "Prediction of the Expansion of Fluidized Beds Containing Tubes", Chem. Eng. Sci. 46, 1561-1571 (1991).
11. Hallstrom, A. and R. Wimmerstedt, "Drying of Porous Granular Materials", Chem. Eng. Sci. 38, 1507-1516 (1983).
12. Heertjes, P.M., H.G.J. de Boer and A.H. de Haas van Dorsser, "Temperature and Humidity Measurements in a Drying Fluidized Bed", Chem. Eng. Sci. 2, 97-107 (1953).
13. Hoebink, J.H. and K. Rietema, "Drying Granular Solids in Fluidized Bed-I", Chem. Eng. Sci. 35, 2135-2140 (1980).
14. Kannan, C.S., S.S. Rao and Y.B. Varma, "A Kinetic Model for Drying of Solids in Batch-Fluidized Beds", Ind. Eng. Chem. Res. 33, 363-370 (1994).
15. Kawamura, S. and Y. Suezawa, "Mechanism of Gas Flow in a Fluidized Bed at Low Pressure", Kagaku Kogaku 25, 254-264 (1961).
16. st Canadian Chemical Engineering Conference", Vancouver, BC (1991), pp. 63-69.
17. Kozanoglu, B., J.A. Vilchez, J. Arnaldos and J. Casal, "Mass Transfer Coefficient in Vacuum Fluidized-Bed Drying", Chem. Eng. Sci. 56, 3899-3901 (2001).
18. nd ed., Butterworth-Heinemann, Boston, MA (1991).
19. Kusakabe, K., T. Kuriyama and S. Morooka, "Fluidization of Fine Particles at Reduced Pressure", Powder Technol. 58, 125-130 (1989).
20. Llop, M.F., F. Madrid, J. Arnaldos and J. Casal, "Fluidization at Vacuum Conditions. A Generalized Equation for the Prediction of Minimum Fluidization Velocity", Chem. Eng. Sci. 51, 5149-5157 (1996).
21. Madrid, F., B. Kozanoglu, E. Planas, J. Casal and J. Arnaldos, "Secado de Sólidos en Lecho Fluidizado a Presión Reducida", Información Tecnológica 9, 297-304 (1998).
22. Mori, S. and C.Y. Wen, "Estimation of Bubble Diameter in Gaseous Fluidized Beds", AIChE J. 21, 109-115 (1975).
23. Nelson, R., "Material Properties in SI Units, Part 4, SI Values for Dry and Humid Air. Liquid Water and Water Vapor", Chem. Eng. Prog. 76, 83-85 (1980).
24. Nicklin, D.J., "Two-Phase Bubble Flow", Chem. Eng. Sci. 17, 693-701 (1962).
25. Palancz, B., "A Mathematical Model for Continuous Fluidized Bed Drying", Chem. Eng. Sci. 38, 1045-1059 (1983).
26. Parti, M., "Evaluation of Selected Mathematical Models for Grain Drying", in "Drying 91 ", A.S. Mujumdar and I. Filkova, Eds., Elsevier, Amsterdam, The Netherlands (1991), pp. 369-378.
27. Pirkle, J.C. and W.E. Schiesser, "DSS/2: A Transportable Fortran 77 Code for Systems of Ordinary and One, Two and Three-dimensional Partial Differential Equations", in "Proceedings of the 1987 Summer Computer Simulation Conference", Montreal, QC (1987), pp. 61-68.
28. Ranz, W.E., "Fixation and Transfer Coefficients for Single Particles and Packed Beds", Chem. Eng. Prog. 48, 247-253 (1952).
29. Thomas, P.P. and Y.B. Varma, "Fluidized Bed Drying of Granular Food Materials", Powder Technol. 69, 213-222 (1992).
30. Toomey, R.D. and H.F. Johnstone, "Gaseous Fluidization of Solid Particles", Chem. Engng. Prog. 48, 220-228 (1952).
31. Uckan, G. and S. Ulku, "Drying Corn Grains in a Batch Fluidized Bed Dryier", in "Drying 86", A. S. Mujumdar, Ed., Wiley, New York (1986), pp. 91-96.
32. Walas, S.M., "Modeling with Differential Equations in Chemical Engineering", Butterworth-Heinemann, Boston (1991).
33. Wraith, A.E. and R. Harris, "Fluidisation of a Mineral Concentrate at Reduced Pressure", Minerals Eng. 5, 993-1002 (1992).
34. Zanchetta, A. and G. Aldo, "New Application in the Vacuum Drying Sector", Technol. Chim. 12, 70-73 (1993).