Near infrared spectroscopy in the forest products industry

Forest Products Journal

Volumn 54, Issue 3, 2004, Pages 6-16

  So, Chi Leung ^a   Via, Brian K ^a   Groom, Leslie H ^b   Schimleck, Laurence R ^c   Shupe, Todd F ^a   Kelley, Stephen S ^d   Rials, Timothy G ^e  

^a LOUISIANA STATE UNIVERSITY AGRICULTURAL CENTER   (United States)

^b USDA FOREST SERVICE   (United States)

^c UNIVERSITY OF GEORGIA   (United States)

^d NATIONAL RENEWABLE ENERGY LABORATORY   (United States)

^e UNIVERSITY OF TENNESSEE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

HYGROSCOPIC MATERIAL; WOOD COMPOSITES;

FOOD PRODUCTS; INFRARED SPECTROSCOPY; LEAST SQUARES APPROXIMATIONS; MATHEMATICAL TECHNIQUES; MOISTURE; PRINCIPAL COMPONENT ANALYSIS; PRODUCTIVITY; VAPOR PRESSURE; WOOD PRODUCTS;

FORESTRY;

FOREST PRODUCTS INDUSTRY; FORESTRY; INFRARED SPECTROSCOPY; MOISTURE; PRODUCTIVITY; VAPOR PRESSURE; WOOD PRODUCTS;

EID: 1842422884     PISSN: 00157473     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Review

References (58)

1. Antti, H., M. Sjöström, and L. Wallbäcks. 1996. Multivariate calibration models using near-infrared spectroscopy on pulp and paper industrial applications. J. Chemom. 10(5-6):591-603.
2. _, D. Alexandersson, M. Sjöström, and L. Wallbäcks. 2000. Detection of kappa number distributions in kraft pulps using NIR spectroscopy and multivariate calibration. Tappi J. 83(3): 102-108.
3. Andersson, N. and D.I. Wilson. 2003. Measurement uncertainty in NIR analysis of black liquor parameters. Paperi. ja Puu Paper and Timber 85(7):397-402.
4. Axrup L., K. Markides, and T. Nilsson. 2000. Using miniature diode array NIR spectrometers for analyzing wood chips and bark samples in motion. J. Chemom. 14 (5-6):561-572.
5. Ben-Gera, I. and K.H. Norris. 1968. Direct spectrophotometric determination of fat and moisture in meat products. J. Food Sci. (33):64-67
6. Birkett, M.D. and M.J.T. Gambino. 1988. Potential applications for near infrared spectroscopy in the pulping industry. Paper Southern Africa. Nov./Dec.:34-38.
7. _ and _. 1989. Estimation of pulp kappa number with near infrared spectroscopy. Tappi J. 72(9):193-197.
8. Carlsson, J., M. Mathiasson, and J. Goeminne. 2002. Online monitoring of fiber quality in the MDF process. In: Proc. 6th European Panel Products Symp., Llandudno, Wales. Univ. of Wales, Bangor, Wales, pp. 167-177.
9. Delwiche, S.R., R.E. Pitt, and K.H. Norris. 1992. Sensitivity of near-infrared absorption to moisture content versus water activity in starch and cellulose: A note. Cereal Chem. 69(1): 107-109.
10. Engstrom, B. and M. Hedqvist. 1999. Prediction of the properties of boards by using a spectroscopic method combined with multivariate calibration. US Patent No. 5,965,888.
11. Evans, R. 1994. Rapid measurement of the transverse dimensions of tracheids in radial wood sections from Pinus radiata. Holzforschung 48:68-172.
12. _. 2002. Art, science and informatics - visualization of large, complex data sets in high-speed measurement of the microstructure of wood. The Burgess-Lane Memorial Lectureship in Forestry Lecture. Univ. of British Columbia, Vancouver, BC, Canada. Sept. 20, 2002.
13. _, M. Hughes, and D. Menz. 1999. Microfibril angle variation by scanning x-ray diffractometry. Appita J. 52(5):363-367.
14. _, S. Stringer, and R.P. Kibblewhite. 2000. Variation of microfibril angle, density and fibre orientation in twenty-nine Eucalyptus nitens trees. Appita J. 53(6): 450-457.
15. _, G.M. Downes, D.N.J. Menz, and S.L. Stringer. 1995. Rapid measurement of variations in tracheid transverse dimensions in a radiata pine tree. Appita J. 48(2):134-138.
16. Fardim, P., M. Márcia, C. Ferreira, and N. Durán. 2002. Multivariate calibration for quantitative analysis of eucalypt kraft pulp by NIR spectrometry. J. Wood Chem. Tech. 22(1):67-81.
17. Feldhoff, R., T. Huth-Fehre, and K. Cammann. 1998. Detection of inorganic wood preservatives on timber by near infrared spectroscopy. J. Near Infrared Spectrosc. 6(A):171-173.
18. Ferré, J. and S.D. Brown. 2001. Reduction of model complexity by orthogonalization with respect to non-relevant spectral changes. Appl. Spectrosc. 55(6):708-714.
19. Gindl, W., A. Teischinger, M. Schwanninger, and B. Hinterstoisser. 2001. The relationship between near infrared spectra of radial wood surfaces and wood mechanical properties. J. Near Infrared Spectrosc. 9(4) 255-261.
20. Hauksson, J.B., G. Bergqvist, U. Bergsten, M. Sjöström, and U. Edlund. 2001. Prediction of basic wood properties of near infrared spectroscopy data using partial least squares regression. Wood Sci. Tech. 35(6):475-485.
21. Hedrick, S.F., R.M. Bennett, S.S. Kelley, and T.G. Rials. 2003. Determination of wood properties using near infrared spectroscopy. In: Proc. ASCE/SEI 2004 Structures Congress, Nashville, TN. ASCE, Reston, VA.
22. Hodges, R.E. and G.A. Krishnagopalan. 1999. Near-infrared spectroscopy for on-line analysis of white and green liquors. Tappi J. 82(9):101-106.
23. Hoffmeyer, P. and J. Pedersen. 1995. Evaluation of density and strength of Norway Spruce by near infrared reflectance spectroscopy. Holz als Roh-und Werkstoff. 53: 165-170.
24. Johnsson, B., P. Wallsten, and P. Renmarker. 2000. BoardModel - A new NIR-based process modeling system for wood panels. In: Proc. 34th Inter. Particleboard/Composite Materials Symp. Washington State Univ., Pullman, WA. pp. 107-114.
25. Kelley, S.S. 2003. Method for predicting mechanical properties of decayed wood. US Patent No. 6,593,572.
26. _, J. Jellison, and B. Goodell 2002. Use of NIR and MBMS coupled with multivariate analysis for detecting the chemical changes associated with brown-rot biodegradation of spruce wood. FEMS Microbiology Letters 209(1):107-111.
27. _, T.G. Rials, L.H. Groom, and C-L. So. 2004a. Use of infrared spectroscopy to predict the mechanical properties of six softwoods. Holzforschung (in press).
28. _, _, R. Snell, L.H. Groom, and A.D. Sluiter. 2004b. Use of near infrared spectroscopy to measure the chemical and mechanical properties of solid wood. Wood Sci. Tech. (in press).
29. Land, S.B., M. Stine, X. Ma, D.L. Rockwood, M.V. Warwell, and G.R. Alker. 2001. A tree improvement program for eastern cottonwood in the southeastern United States. In: Proc. 26th Biennial Southern Forest Tree Improvement Conf. J.F.D. Dean, ed. Southern Forest Tree Improvement Committee, Athens, GA.
30. Larson, P.R., D.E. Kretschmann, A. Clark, and J.G. Isebrands. 2001. Formation and properties of juvenile wood in southern pine: A synopsis. Gen. Tech. Rept. FPLGTR-129. USDA Forest Serv., Forest Prod. Lab., Madison, WI.
31. Li, B., S. McKeand and R. Weir. 1999. Tree improvement and sustainable forestry - impact of two cycles of loblolly pine breeding in the U.S.A. Forest Genetics 8(3):213-224.
32. Martens, H. and T. Naes. 1991. Multivariate Calibration. John Wiley, New York. 419 pp.
33. Maynard, C.A. 1976. Rapid growth and high survival shown in (Populus alba x P. grandidentata) x P. tremuloides seedlings. In: Proc. 10th Central States Forest Tree Improvement Conf. pp. 30-34.
34. Meder, R., A. Thumm, and H. Bier. 2002. Veneer stiffness predicted by NIR spectroscopy calibrated using mini-LVL test panels. Holz als Roh-und Werkstoff. 60(3): 159-164.
35. _, _, and D. Marston. 2003. Sawmill trial of at-line prediction of recovered lumber stififness by NIR spectroscopy of Pinus radiata cants. J. Near Infrared Spectrosc. 11(5-6):137-143.
36. Meglen, R.R. and S.S. Kelley. 2003a. Use of a region of the visible and near infrared spectrum to predict mechanical properties of wet wood and standing trees. US Patent No. 6,525,319.
37. _ and _. 2003b. Method for predicting dry mechanical properties from wet wood and standing trees. US Patent No. 6,606,568.
38. Michell, A.J. 1995. Pulpwood quality estimation by near-infrared spectrcscopic measurements on eucalypt woods. Appita J. 48(6):425-428.
39. Noms, K.H. and J.R. Hart, 1965. Direct spectrophotometric determination of moisture content of grain and seeds. In: Principles and Methods of Measuring Moisture Content in Liquids and Solids. Vol. 4. A. Waxier, ed. Reinhold, New York. pp. 19-25.
40. Rials, T.G., S.S. Kelley, and C. So. 2002a. Use of advanced speclroscopic techniques for predicting the mechanical properties of wood composites. Wood Fiber Sci. 34(3): 398-407.
41. _, _, _, and L.H. Groom. 2002b. Use of advanced spectroscopic techniques for predicting the mechanical properties of wood composites. In: Proc. 13th Inter. Symp. on Nondestructive Testing of Wood. UC Berkeley, Berkeley, CA.
42. Schimleck, L.R. and R. Evans. 2002a. Estimation of wood stiffness of increment cores by near infrared spectroscopy: the development and application of calibrations based on selected cores. IAWA J. 23(3):217-224.
43. _ and _. 2002b. Estimation of microfibril angle of increment cores by near infrared spectroscopy. IAWA J. 23(3):225-234.
44. _ and _. 2004. Estimation of P. radiata D. Don tracheid morphological characteristics by near infrared spectroscopy. Holzforschung (in press).
45. _, _, and J. Ilie. 2001a. Estimation of Eucalyptus delegatensis wood properties by near infrared spectroscopy. 31(10):1671-1674.
46. _, _, and _. 2001b. Application of near infrared spectroscopy to a diverse range of species demonstrating wide density and stiffness variation. IAWA J. 22(4):415-429.
47. Schulte, T.P. and D.A. Burns. 1990. Rapid secondary analysis of lignocellulose: comparison of near infrared (NIR) and fourier transform infrared (FTIR). Tappi J. 73(5):209-212.
48. So, C-L., S.T. Lebow, L.H. Groom, and T.G. Rials. 2004. The application of near infrared (NIR) spectroscopy to inorganic preservative-treated wood. Wood and Fiber Sci. (in press).
49. _. L.H. Groom, T.G. Rials, R. Snell, S.S. Kelley, and R.R. Meglen. 2002. Rapid assessment of the fundamental property variation of wood. In: Proc. 11th Biennial Southern Silvicultural Research Conf. K.W. Outcalt, ed. Gen. Tech. Rept. SRS-48. USDA Forest Service, Southern Res. Sta., Asheville, NC. pp. 176-180.
50. Swierenga, H., F. Wülfert, O.E. de Noord, A.P. de Weijer, A.K. Smilde, and L.M.C. Buydens. 2000. Development of robust calibration models in near infra-red spectrometric applications. Anal. Chim. Acta. 411(1-2): 121-135.
51. Thumm, A. and R. Meder. 2001. Stiffness prediction of radiata pine clearwood test pieces using near infrared spectroscopy. J. Near Infrared Spectrosc. 9(2): 177-122.
52. Thygesen, L.G. and S.O. Lundqvist. 2000. NIR measurement of moisture content in wood under unstable temperature conditions. Part 1. Thermal effects in near infrared spectra of wood. J. Near Infrared Spectrosc. 8(3): 183-189.
53. Via, B.K., T.F. Shupe, L.H. Groom, M. Stine, and C.L. So. 2003. Multivariate modeling of density, strength, and stiffness from near infrared spectra for mature, juvenile and pith wood of longleaf pine (Pinus palustris). J. Near Infrared Spectrosc. 11(5):365-378.
54. Wallbacks, L., U. Edlund, B. Norden, and I. Berglund. 1991. Multivariate characterization of pulp using 13C NMR. FTIR and MR. Tappi J. 74(10):201-206.
55. White, T.L., G.R. Hodge, and G.L. Powell. 1993. An advanced-generation tree improvement plan for slash pine in the southeastern United States. Silvae Genet. 42(6): 359-371.
56. Wold, S., L. Eriksson, and M. Sjostrom. 1998. Encyclopedia of Computational Chemistry. Wiley and Sons, New York.
57. Wright, J.A., M.D. Birkett, and M.J.T. Gambino. 1990. Prediction of pulp yield and cellulose content from wood samples using near infrared reflectance spectroscopy. Tappi J. 73(8): 164-166.
58. Wülfert, F., W.T. Kok, O.E. de Noord, and A.K. Smilde. 2000. Linear techniques to correct for temperature-induced spectral variation in multivariate calibration. Chemom. Intell. Lab. 51 (2): 189-200.