Laser welding of dissimilar metals joint aided by unsteady thermal convection boundary element method analysis

Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society

Volumn 23, Issue 1, 2005, Pages 16-24

  Miyashita, Yukio ^a   Nakagawa, Ikutaro ^a   Xu, Jin Quan ^b   Mutoh, Yoshiharu ^a   Akahori, Masatoshi ^a   Okumura, Hayato ^a  

^a NAGAOKA UNIVERSITY OF TECHNOLOGY   (Japan)

^b SHANGHAI JIAO TONG UNIVERSITY   (China)

Author keywords

Boundary element method; Dissimilar metals joint; Lap joint; Laser welding; Nd:YAG laser; Un steady thermal convection

Indexed keywords

DISSIMILAR METAL JOINTS; LAP JOINT; ND:YAG LASER; UN-STEADY THERMAL CONVECTION;

ALLOYING; BOUNDARY ELEMENT METHOD; DIFFUSION IN SOLIDS; HEAT CONVECTION; INTERFACES (MATERIALS); INTERMETALLICS; JOINTS (STRUCTURAL COMPONENTS); METAL ANALYSIS; WELDABILITY;

LASER BEAM WELDING;

EID: 18344372199     PISSN: 02884771     EISSN: None     Source Type: Journal    
DOI: 10.2207/qjjws.23.16     Document Type: Article

References (29)

1. Kenji IKEUCHI: "Solid state bonding of aluminum alloys to dissimilar metals", Journal of Japan Institute of Light Metals, 46-6, (1996), 298-306. (in Japanese)
2. Osamu OHASHI: "Q&A KAKUSANSETSUGOH", SANPOH-SHUPPAN (1993). (in Japanese)
3. Shinichi KURODA, Kazuyoshi SAIDA and Kazutoshi NISHIMOTO: "Microstructure and Properties of Directly Bonded Joint of A6061 Aluminum Alloy to SUS316 Stainless Steel", Quar. J. JWS, 17-3, (1999), 484-489. (in Japanese)
4. Shinichi KURODA, Ichiro MAKINO, Katsuhiko KATOH, Kazuyoshi SAIDA, Kazutoshi NISHIMOTO: "Improvement in Diffusion - Boundability of A6061 Aluminum Alloy to SUS316 Stainless Steel using Ag insert Metal and Its Quantitatively Evaluation by Mathematical Method - Study on Diffusion Bonding of Aluminum Alloy to Stainless Steel (report 2)-", Quar. J. JWS, 17-4, (1999), 519-525. (in Japanese)
5. Hiizu OCHI, Koichi OGAWA, Yoshiaki YAMAMOTO and Yasuo SUGA: "Friction Welding of 2017 and 6061 Aluminum Alloys to S45C Carbon Steel", Journal of the Society of Materials Science, Japan, 45-4, (1996), 459-464. (in Japanese)
6. Hiizu OCHI, Koichi OGAWA, Yoshiaki YAMAMOTO, Shigeki HASHINAGA, Yasuo SUGA and Tadakazu OHNISHI: "Static strength of friction welded joint of 6061 aluminum alloy to SUS304 stainless steel", Journal of Japan Institute of Light Metals, 46-10, (1996), 500-504. (in Japanese)
7. Hiizu OCHI, Koichi OGAWA, Yoshiaki YAMAMOTO and Yasuo SUGA: "Dynamic strength of friction welded joint of 6061 aluminum alloy to SUS304 stainless steel", Journal of Japan Institute of Light Metals, 47-6, (1996), 347-351. (in Japanese)
8. Shinji FUKUMOTO, Mikio OHASHI, Harushige TSUBAKINO, Kozo OKITA, Masatoshi ARITOSHI, Tomoki TOMITA and Koji GOTO: "Microstructure of friction welded joint of 6061 aluminum alloy to 304 stainless steel", Journal of Japan Institute of Light Metals, 48-1, (1998), 36-41. (in Japanese)
9. Takeshi SHINODA, Masafumi OGAWA, Seiichi ENDO and Kazuya MIYAHARA: "Friction Welding of Aluminum and Plain Low Carbon Steel", Quar. J. JWS, 18-3, (2000), 365-372. (in Japanese)
10. Takehiko WATANABE, Akihiko YONEDA, Atsushi YANAGISAWA, Shizuyo KONUMA and Osamu OHASHI: "Ultrasonic Welding of Al-Cu and Al-SUS304 - Study on The ultrasonic Welding of Dissimilar Metals (1st report) -", Quar. J. JWS, 17-2, (1999), 223-233. (in Japanese)
11. Takehiko WATANABE, Akihiko YONEDA, Atsushi YANAGISAWA, Shizuyo KONUMA and Osamu OHASHI: 'The Effect of Oxide Film on the Strength of an Ultrasonically Welded Joint and Welding Process - Study on The ultrasonic Welding of Dissimilar Metals (2nd report) - ", Quar. J. JWS, 17-2, (1999), 234-242. (in Japanese)
12. Hatsuhiko OIKAWA, Tohru SAITO, Takashi YOSHIMURA, Takao NAGASE and Tadao KIRIYAMA: "Spot Welding of Aluminum Clad Steel to Steel or Aluminum - Dissimilar Metal Joining of Steel to Aluminum with Intermediate Layer (Report 1) - ", Quar. J. JWS, 14-1, (1996), 69-80. (in Japanese)
13. Hatsuhiko OIKAWA, Tohru SAITO, Takashi YOSHIMURA, Takao NAGASE and Tadao KIRIYAMA: "Factors Influencing Spot-weldability of Steel to Aluminum with Intermediate Layer of Aluminum Clad Steel - Dissimilar Metal Joining of Steel to Aluminum with Intermediate Layer (Report 2) - ", Quar. J. JWS, 14-2, (1996), 267-277. (in Japanese)
14. Kazumasa NISHINO, Mitsuaki KATOH and Takayuki KAWANO: "Effect of Fabricating Method and Chemical Compositions of Al-Clad Materials on Formation of Intermediate Phases - Development of Clad Materials by Vacuum Roll Bonding and its Characteristics (report 3) - ", Quar. J. JWS, 18-1, (2000), 18-25. (in Japanese)
15. E. Schubert, I. Zemer and G Sepold: "Laser Beam Joining of Material Combinations for Auto Motive Applications", Konferenzband LASER'97 Munich, (1997), 212-221.
16. Seiji KATAYAMA, Ryosuke USUI and Akira MATSUNAWA: "Laser Joining of Aluminum and Iron Dissimilar Metals", NETSUGEN Center DAYORI, No.14 (1998), 30-31. (in Japanese)
17. Jiro MATSUMOTO: "Welding of Aluminum", Journal of Japan Institute of Light Metals, 45-5 (1995), 293-306. (in Japanese)
18. Hiroshi MARUO, Isamu MIYAMOTO, Takashi ISHIDE and Yoshiaki ARATA: "Investigation of Laser Hardening - Analysis of Hardening Condition in Carbon Steel -, J. JWS, 50-2(1981), 208-214. (in Japanese)
19. Saburo MAKINOUCHI, Yoshiharu NAMBA and Etsuji OHMURA: "Gauss KEI BUNPU NO IDOU-NETSUGEN NI YORU YUGEN-HEIBAN NO ONDOBUNPU-KAISEKI - DAI 1 POH, Laser KOUKA-SYORI NI KANSURU KENKYU", Transactions of the Japan Society of Mechanical Engineers, C48-436, (1982) 1986-1992. (in Japanese)
20. Saburo MAKINOUCHI, Yoshiharu NAMBA and Etsuji OHMURA: "Step NYURYOKU NI YORU Laser KOUKA-SYORI", Transactions of the Japan Society of Mechanical Engineers, C49-437, (1983), 98-108. (in Japanese)
21. Yoshiharu NAMBA, Etsuji OHMURA and Saburo MAKINOUCHI: "Laser KOHKA-SHORI NI KANSURU KENKYU - DAI-2 HO, KOUKASO-SEISEIKATEI NO KAISEKI", Transactions of the Japan Society of Mechanical Engineers, C50-454, (1984), 1099-1106. (in Japanese)
22. Katsunori INOUE, Etsuji OHMURA and Koichi HARUTA: "Computer Simulation on Structural Change of Hypo-Eutectoid Steel in Laser Transformation Hardening Process", Transactions of the Japan Society of Mechanical Engineers, C54-500, (1988), 1026-1034. (in Japanese)
23. Kunihiko SATOH, Yukio UEDA and Tsugio FUJIMOTO : "YOSETU-HENKEI- ZANRYU-ORYOKU" SANPO PUBRICATIONS, INC.(1979). (in Japanese)
24. Kaizo MONMA: "DAIGAKU KISO KIKAI ZAIRYOU"JIKKYO SHUPPAN Co., Ltd.(1978). (in Japanese)
25. "The Handbook of Advanced Aluminum Technology", ed. by Japan Institute of Light Metals, KALLOS PUBLISHING Co., Ltd.(1996). (in Japanese)
26. Moriaki ONO, Makoto KABASAWA and Masanori OHMURA: "Static and Fatigue Strength of Laser Welded Lap Joints", Quar. J. JWS, 14-3 (1996), 586-591. (in Japanese)
27. Naoki SETO, Seiji KATAYAMA and Akira MATSUNAWA: "Porosity Formation Mechanism and Suppression Procedure in Laser Welding of Aluminum Alloy", Quar. J. JWS, 18-2 (2000), 243-255. (in Japanese)
28. Binary Alloy Phase Diagrams, Second Edition, Version 1.0, published by ASM in 1990.
29. Koji SHIBATA, Shotaro MOROZUMI and Shigeyasu KODA: "Formation of The Alloy Layer in the Fe-Al Diffusion Couple", Journal of Japan Institute of Metals, 30 (1966), 382-388. (in Japanese)