Energy balance of a drill-bit seismic source, part 2: Drill-bit versus conventional seismic sources

Geophysics

Volumn 70, Issue 2, 2005, Pages

  Poletto, Flavio ^a  

^a ISTITUTO NAZIONALE DI OCEANOGRAFIA E DI GEOFISICA SPERIMENTALE OGS   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BITS; DRILLING; MATHEMATICAL MODELS; ROTATION; VIBRATIONS (MECHANICAL);

DRILL-BIT RADIATIONS; ENERGY BALANCE; POLYCRYSTALLINE DIAMOND COMPACT (PDC) BITS; VERTICAL SEISMIC PROFILING (VSF);

SEISMOLOGY;

SEISMIC SOURCE;

EID: 17944369868     PISSN: 00168033     EISSN: None     Source Type: Journal    
DOI: 10.1190/1.1897039     Document Type: Article

References (50)

1. Aarrestad, T. V., and Å. Kyllingstad, 1988, An experimental and theoretical study of a coupling mechanism between longitudinal and torsional drillstring vibrations at the bit: SPE Drilling Engineering, Paper No. 15563.
2. Adams, N. J., and T. Charrier, 1985, Drilling engineering-A complete well planning approach: PennWell Publishing Company.
3. Baeten, G., and A. Ziolkowski, 1990, The vibroseis source: Elsevier Science Publ. Co., Inc.
4. Behr, S. M., T. M. Warren, L. A. Sinor, and J. F. Brett, 1993, 3D PDC bit model predicts higher cutter loads: SPE Drilling & Completion, December, SPE Paper No. 21928.
5. Biggs, M. D., J. B. Cheatham Jr., and U. Rice, 1969, Theoretical forces for prescribed motion of a roller bit: SPE Paper No. 2391.
6. Brett, J. F., T. M. Warren, and S. Behr, 1990, Bit whirl-A new theory of PDC bit failure: SPE Drilling Engineering, SPE Paper No. 19571.
7. Burgess, T. M., and W. G. Lesso Jr., 1985, Measuring the wear of milled tooth bits using MWD torque and weight-on-bit: SPE/IADC Paper No. 13475.
8. Cassand, J., and M. Lavergne, 1971, Seismic emission by vibrators: in Robert Van Nostrand, ed., Seismic fittering: SEG, Translations of Editions Technip, 198.
9. Chen, S. L., K. Blackwood, and E. Lamine, 1999, Field investigation of the effects of stick-slip, lateral, and whirl vibrations on roller cone bit performance: SPE Paper No. 56439.
10. Cooley, C. H., P. E. Pastusek, and L. A. Sinor, 1992, The design and desting of anti-whirl bits: SPE Paper No. 24586.
11. Cunningham, R. A., 1968, Analysis of downhole measurements of drill string forces and motions: Journal of Engineering for Industry, Transactions of the ASME, Series B, 90, 209-216.
12. Dareing, D. W., 1982, Drill collar lengths is a major factor in vibration control: SPE Paper No. 11228.
13. Deily, F. H., D. W. Dareing, G. H. Paff, J. E. Ortloff, and R. D. Lynn, 1968, Downhole measurements of drill string forces and motions: Journal of Engineering for Industry, Transactions of the ASME, Series B, 90 217-225.
14. Devereux, S., 1999, Drilling technology in nontechnical language: PennWell Publishing Company.
15. Dobrin, M. B., 1981, Introduction to geophysical prospecting, 3rd ed.: McGraw-Hill International Book Company.
16. Duc, N. Guyen Minh, H. Cholet, and P. Tricot, 1972, Stress concentration induced in elastic rocks under a diamond bit tooth: SPE Paper No. 3987.
17. Eronini, I. E., W. H. Sommerton, and D. M. Auslander, 1982, A dynamic model for rotary rock drilling: ASME Journal of Energy Resources Technology, 104, 108-120.
18. Falconer, I. G., T. M. Burgess, and M. C. Sheppard, 1988, Separating bit and lithology effects from drilling mechanics data: IADC/SPE Paper No. 17191.
19. Gabolde, G., and J. P. Nguyen, 1999, Drilling data handbook, 7th ed.: Editions Technip.
20. Glowka, D. A., 1986, The use of single-cutter data in the analysis of PDC bit design: SPE Paper No. 15619.
21. Hanson, J. M., and W. R. Hansen, 1995, Dynamics modeling of PDC bits: SPE/IADC Paper No. 29401.
22. Hardage, B. A., 1992, Crosswell seismology and reverse VSP: Geophysical Press.
23. Hasley, G. W., Å. Kyllingstad, T. V. Aarrestad, and D. Lysne, 1986, Drillstring torsional vibrations: Comparison between theory and experiment on full-scale research drilling rig: SPE Paper No. 15564.
24. Holster, J. L., and R. J. Kipp, 1984, Effect of bit hydraulic horsepower on the drilling rate of a polycrystaline diamond compact bit: Journal of Petroleum Technology, SPE Paper No. 11949, 2110-2118.
25. Hutchinson, M., V. Dubinsky, and H. Henneuse, 1995, An MWD downhole assistant driller: SPE Paper No. 30523.
26. Jansen, J. D., L. van den Steen, and L. Zachariasen, 1995, Active damping of torsional drillstring vibrations with a hydraulic top drive: SPE Drilling & Completion, SPE Paper No. 28911, 250-254.
27. Jardine, S. I., M. L. Lesage, and D. P. McCann, 1990, Estimating tooth wear from roller cone bit vibration: IADC/SPE Paper No. 19966.
28. Kyllingstad, Å., and G. W. Hasley, 1987, A study of slip-stick motion of the bit: SPE Paper No. 16659.
29. Langenkamp, R. D., 1994, Illustrated petroleum reference dictionary, 4th ed.: PennWell Publishing Company.
30. Langeveld, C. J., 1992a, PDC bit dynamics: IADC/SPE Paper No. 23867.
31. Langeveld, C. J., 1992b, PDC bit dynamics (Supplement to IADC/SPE Paper No. 23867): IADC/SPE Paper No. 23873.
32. Ma, D., and J. J. Azar, 1985, Dynamics of roller cone bits: Journal of Energy Resources Technology, Transactions of the American Institute of Mechanical Engineers, 107, 543-548.
33. Ma, D., D. Zhou, and R. Deng, 1995, The computer simulation of the interaction between roller bit and rock: SPE Paper No. 29922.
34. McGehee, D. Y., J. S. Dahlem, J. C. Gieck, B. Kost, D. Lafuze, C. H. Reinsvold, and S. C. Steinke, 1992a, The IADC roller bit classification system: IADC/SPE Paper No. 23937.
35. McGehee, D. Y., J. S. Dahlem, J. C. Gieck, B. Kost, D. Lafuze, C. H. Reinsvold, and S. C. Steinke. 1992b, The IADC roller bit dull grading system: IADC/SPE Paper No. 23938.
36. Miller, G. F., and H. Pursey, 1954, The field and radiation impedance of mechanical radiators on the free surface of semi-infinite isotropic solid: Proceedings of the Royal Society, 223, 521-541.
37. Miranda, F., L. Aleotti, F. Abramo, F. Poletto, A. Craglietto, S. Persoglia, and F. Rocca, 1996, Impact of seismic while drilling technique on exploration wells: First Break, 14, 55-68.
38. Naganawa, S., S. Tanaka, and N. Sugaya, 1995, Experimental and theoretical analysis of roller cone bit vibrations: Energy Sources Technology Conference, American Society of Mechanical Engineers, Proceedings, 1-7.
39. Poletto, F., 2005, Energy balance of a drill-bit seismic source, part 1: Rotary energy and radiation properties: Geophysics, this issue.
40. Poletto, F., M. Malusa, and F. Miranda, 2001, Numerical modeling and interpretation of drill-string waves: Geophysics, 66, 1569-1581.
41. Poletto, F., F. Miranda, P. Corubolo,, and F. Abramo, 1997, Seismic while drilling using PDC signals - Seisbit experience and perspectives: 59th Annual International Meeting, EAGE, Extended Abstracts, E-053.
42. Rector III, J. W., and B. P. Marion, 1991, The use of drill-bit energy as a downhole seismic source: Geophysics, 56, 628-634.
43. Santos, H., J. C. R. Plácido, and C. Wolter, 1999, Consequences and relevances of drillstring vibration on wellbore stability: SPE/IADC Paper No. 52820.
44. Sheppard, M. C., and M. Lesage, 1988, The forces at the teeth of a drilling rollercone bit: Theory and experiment: SPE Paper No. 18042.
45. Skaugen, E., 1987, The effects of quasi-random drill bit vibrations upon drillstring dynamic behavior: SPE Paper No. 16660.
46. White, D. B., and D. A. Curry, 1988, Effects of nozzle configuration on roller cone bit performance: IADC/SPE Paper No. 17188.
47. Winters, W. J., T. M. Warren, and E. C. Onyia, 1987, Roller bit model with rock ductility and cone offset: SPE Paper No. 16696.
48. Wolf, S. F., M. Zacksenhouse, and A. Arian, 1985, Field measurements of downhole drillstring vibrations: SPE Paper No. 14330.
49. Yang, L. Z., 1990, The analysis of relations between a tricone bit and lobed bottom in low frequency axial vibration: SPE Paper No. 20325.
50. Zijsling, D. H., 1987, Single cutter testing - A key for PDC bit development: SPE Paper No. 16529/1.