Design and control of a dual stage fast tool servo for precision machining

Proceedings of the IEEE International Conference on Control Applications

Volumn 1, Issue , 2004, Pages 742-747

  Krishnamoorthy, K ^a   Lin, Chi Ying ^a   Tsao, Tsu Chin ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Dual Stage Actuator System; Fast Tool Servo; Iterative Learning Control; Noncircular Turning; Repetitive Control

Indexed keywords

ACTUATORS; DIGITAL CONTROL SYSTEMS; ITERATIVE METHODS; LINEAR CONTROL SYSTEMS; PIEZOELECTRICITY; ROBUSTNESS (CONTROL SYSTEMS); SERVOMECHANISMS;

DUAL STAGE ACTUATOR SYSTEM; FAST TOOL SERVO; ITERATIVE LEARNING CONTROL; NONCIRCULAR TURNING; REPETITIVE CONTROL;

MACHINING;

EID: 17844367362     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (34)

1. Ingersoll Milling Machine Company, "First camless piston manufacturing system expected to increase workpiece quality for Pontiac Motor Division," The Cutting Edge, Ingersoll Cutting Tools, No. 3, 1984.
2. Scott, D and J. Yamaguchi, "Computerized piston lathe speeds complex profiling," Automotive Engineering, Vol. 92,No. 6, 63-66,1984.
3. Sugita, K., "Development of a High Speed Non-Circular Turning Machining using Hybrid System with VCM and PZT," Japan USA Symposium on Flexible Automation, Vol. 2, pp. 957-962, 1992.
4. Higuchi,T., T. Yamaguchi,and M. Tanaka, "Development of a High Speed Non-Circular Machining NC-lathe for Cutting a Piston-Head of a Reciprocating Engine by Use of a New Servomechanism Actuated by Electromagnetic Attractive force," Seimitsu Kogaku Kaishi Journal of the Japan Society for Precision Engineering, v 62 n 3 Mar 1996, p 453-457.
5. Okazaki, Y., "A Micro-Positioning Tool Post Using a Piezo Actuator for Diamond Turning Machines," Precision Engineering, Vol. 12, No. 3, pp. 151-156, 1990.
6. Dow, T. A., M. H. Miller, and P. J. Falter, "Application of a fast tool servo for diamond turning of nonrotationally symmetric surfaces," Precision Engineering, v 13 n 4, p 243-250, Oct 1991.
7. Miller, M. H., K. P. Garrard, T. A. Dow, and L. W. Taylor, "Controller architecture for integrating a fast tool servo into a diamond turning machine," Precision Engineering, v 16 n 1, p 42-48, Jan 1994.
8. Ludwick, S.J., Chargin, D.A., Calzaretta, J.A., and Trumper, D.L., "Design of a Rotary Fast Tool Servo for Ophthalmic Lens Fabrication, " Precision Engineering, Vol. 23, No. 4, September, 1999.
9. Calzaretta, J., Ludwick, S.J., and Trumper, D.L., "Repetitive Control of a Fast-Tool Servo for Asymmetric Diamond Turning, " Mechatronics 2000, the 7th Mechatronics Forum International Conference, Atlanta, GA, Sept. 6-8, 2000.
10. Tsao, T-C., "Non-Circular Turning for Camshaft Machining - Fast Response Actuators, Sensors, and Motion Control for Cam Profile Tracking, " Advanced Technology Program Motor Vehicle Manufacturing Technology Public Workshop, Publication No. NISTIR 6079, 55-63, 1997.
11. Tsao, T-C., R. D. Hanson, Z. Sun, and A. Babinski, "Motion Control of Non-Circular Turning Process for Camshaft Machining, " Proceedings of the Japan-U.S.A. Symposium on Flexible Automation, Otsu, Japan, 485-489, July 1998.
12. Kim, B-S., Li J., and Tsao, T-C., "Control of a Dual Stage Actuator System for Noncircular Cam Turning Process, " Proceedings of the American Control Conference, Arlington, VA, June 25-27, 2001.
13. Tomizuka, M., M-S. Chen, S. Ren, and T-C. Tsao, "Tool positioning for noncircular cutting with lathe, " ASME Journal of Dynamical System, Measurement and Control, Vol. 109, 176-179, 1987.
14. Xia, Z., and C-H. Meng, "Precision Tracking Control of Nonminimum Phase Systems and its Application to Noncircular Cutting, " ASME Winter Annual Meeting Bounded Volume DSC, Vol.22, pp. 95-99, 1990.
15. Tran, H. D.; and D. B. DeBra, "Feedforward methods for noncircular turning on a lathe, " Proceedings of the 11th Triennial World Congress of the International Federation of Automatic Control, Tallinn, USSR IFAC-Symposia-Series-Proceedings-of-a-Triennial World-Congress, v 5, p 65-70, 1994.
16. Kashani, A. R., and J. W. Sutherland, "Adaptive Feedforward Control for Periodic Disturbance Rejection with Application to Machining Processes, " Technical Papers of NAMRIISME, pp. 181-186, May 1996.
17. Tsao, T. C. and M. Tomizuka, "Adaptive and Repetitive Digital Control Algorithms for Noncircular Machining, " American Control Conference, Atlanta, II 5-120, GA, June 1988.
18. Tsao, T. C. and M. Tomizuka, "Robust Adaptive and Repetitive Digital Tracking Control and Application to a Hydraulic Servo for Noncircular Machining, " ASME Journal of Dynamic Systems, Measurement, and Control, Vol. II 6, pp. 24-32, March 1994.
19. Hanson, R. D. and T. C. Tsao, "Discrete-Time Repetitive Control of LTI Systems Sampled at a Periodic Rate, " Proceedings of IFAC 96 World Congress, San Francisco, CA, vol. D, 13-18, June 1996.
20. Gutierrez, H. M., and P. I. Ro, "Modeling and control of a magnetic servo-levitated fast-tool servo system, " Proceedings-of-the-Japan-USA- Symposium-on-Flexible-Automation, Boston, MA, v 2, pp. 1159-1166, 1996.
21. Tsao, T. C. and M. Tomizuka, "Hydraulic Servo System Design for Noncircular Machining, " 16th North American Manufacturing Research Conference, Champaign, IL, 336-343, May 1988.
22. Tran, H. D. and D. B. DeBra, "Design of a fast short-stroke hydraulic actuator, " CIRP-Annals, v 43 n 1, pp. 469-472, 1994.
23. Kim, Dean H., and T-C. Tsao, "Robust Performance Control of Electrohydraulic Actuators for Camshaft Machining, " ASME International Mechanical Engineering Congress and Exposition, Dallas, TX, FPST-Vol. 4/DSC-Vol. 63, 39-53, 33-38, Nov. 1997.
24. Sun, Z. X. and T-C. Tsao, "Adaptive Repetitive Control Design with Application to an Electrohydraulic Servo, " ASME International Mechanical Engineering Congress and Exposition, Dallas, TX, FPST-Vol. 4/DSC-Vol. 63, 39-53, 33-38, Nov. 1997.
25. Gutierrez, H. M., B. A. Stancil, and P. I. Ro, "Design of a magnetic servo-levitated fast tool servo system for precision taming, " Proceedings of the 1995 ASME International Mechanical Engineering Congress and Exposition, DSC, Part 1 (of 2), pp. 491-496, San Francisco, CA
26. Alter, D. M., and T-C. Tsao, "Exact Two Dimensional Model Matching with Application to Repetitive Control, " ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 116, pp. 2-9, 1994.
27. Rasmussen, J. D., Tsu-Chin Tsao, R. D. Hanson, and S. G. Kapoor, "Dynamic Variable Depth of Cut Machining Using Piezoelectric Actuators," International Journal of Machine Tools and Manufacture, Vol. 34, No. 3, 379-392, 1994.
28. Hanson, R. D., and Tsu-Chin Tsao, "Development of a Fast Tool Servo for Variable-Depth-Of-Cut Machining," ASME International Mechanical Engineering Congress and Exposition, Chicago, IL, DSC-Vol. 55-2, p. 863-872, Nov. 1994.
29. Liu, D., W. L. Kanizar, K. S. Moon, and J. W. Sutherland, "Development of a Magnetostrictive Based Cutting Tool Micropositioner for Non-circular Turning," Proc. of 2nd S. M Wu Symposium on Manufacturing Science, pp. 37-42, May 1996.
30. J. Li and T.-C. Tsao, "A Two Parameter Robust Repetitive Control Design Using Structured Singular Values," Proceedings of the 37th IEEE Conference on Decision and Control, Tampa, Florida, pp. 1230-1235, December 1998.
31. J. Li and T.-C. Tsao, "Robust Performance Repetitive Control Systems," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 123, pp. 330-337, 2001.
32. M. Tomizuka, T.-C. Tsao, and K. K. Chew, "Analysis and Synthesis of Discrete-Time Repetitive Controllers," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 111, pp. 353-358, September 1989.
33. K. Zhou, J. C. Doyle, and K. Glover, Robust and Optimal Control, Prentice-Hall, Upper Saddle River, 1996
34. R. M. Gray "Toeplitz and Circulant Matrices: A Review", Revised August 2002, Available online at http:/www-ee.stanford.edu/~gray/toeplitz.pdf