Factors affecting the machinability of Al/SiC metal-matrix composites

Key Engineering Materials

Volumn 138-140, Issue , 1998, Pages 545-574

  Monaghan, John ^a  

^a NONE

Author keywords

Drilling; EDM; Machinability; Surface Integrity; Tool materials; Tool wear; Turning

Indexed keywords

ALUMINUM; CERMETS; CUTTING TOOLS; DRILLING; ELECTRIC DISCHARGES; MACHINABILITY; METAL FINISHING; SILICON CARBIDE; TURNING; WEAR OF MATERIALS;

ELECTRIC DISCHARGE MACHINING (EDM);

METALLIC MATRIX COMPOSITES;

EID: 17644439499     PISSN: 10139826     EISSN: 16629795     Source Type: Book Series    
DOI: None     Document Type: Article

References (59)

1. Advanced Ceramic Materials,Technological and Economic Assessment, C.R.A Inc. Noyes Publications New Jersey, USA, 1985.
2. Proceedings of the 5th. International Symposium on Automotive Propulsion Systems, Dearborn MI., Oct. 1980, 1.
3. Proceedings of the 22nd Automotive Technology development Contractors Meeting, SAE Publication, Oct., 1984, 305-351.
4. Snoeys, R. and Staelens, F.: Annals of CIRP, 1986, 35, 467-480.
5. Saito, N.: Bull.J.Soc. Precision Engng., 1984, 18, 32-38.
6. Stephens, J.R.: J. Adv. Mat. and Processes, 1990, 4, 35-38.
7. Arsenault, R.J., Wang, L. and Feng, C.R.:, Acta Metall, 1991, 39/1, 47-57.
8. Lock, J.: Professional Engineer, MEP, Vol.3, No.4, April 1990, 21-24.
9. Rohatgi, P.: J. Adv. Mat. and Processes, 1990, 2, 39-44.
10. Utsunomiya, S., Kagawa, Y., and Kogo, Y.: Japan Soc.Composite Materials, 1987, .34-42.
11. Wallace, R.J. and Copley, S.N.: Adv.Cerm.Mater., 1986, 4, 287-283.
12. Manami, K., Sakai, K. and Okumiya, M.: Bull. J.Soc.Precision Engng., 1986, 20, 204-213.
13. Ramulu, M.: Adv.Cerm.Mater., 1988, 3, 324-327
14. ] McGinty, M.J., Preuss, C.W., ASM Conf."High Productivity Machining, Materials and Processes", ASM Pub., 1985, 231-244.
15. Hashish, M.: In "Non-Traditional Machining" Ed.C.Wegner ASM Pub. 1985, 1-12.
16. "Suggested Sawing and Machining Guidelines for DURALCAN Composites", Publ. by Dural Aluminium Composites Corp., UK, 1989.
17. Barnes, S. and Pashby, I.R.: App. Comp. Materl., 1995, 2, 31-42.
18. Chen, P. and Miyake, Y.: Proc. of 1989 ASM Int. Conf. on Machinability, Cincinnati, USA, 69-95.
19. Tomac, N. and Tonnessen, K.: Annals of CIRP, 1992, 41/1, 55-59.
20. Waldrop, P.S.: Society of Manufacturing Engineers, Report EM85-106, 1985.
21. Looney, L., Monaghan, J., O'Reilly, P. and Taplin, D.: J. Mater. Process. Technol., 1992, 33, 453-468.
22. Weinert, K.: Annals of CIRP, 1993, 42/1, 95-98.
23. Chambers, A.R. and Stephens, S.E.: Mat. Sci. and Eng., 1991, A135, 287-290.
24. Quigley, O., Monaghan, J. and O'Reilly, P.: J. Mater. Process. Technol., 1994, 43, 21-36.
25. Gindy, N.N.Z. and Clegg, A.J.: BNF 7th. Int. Conf. The Materials Revolution Through the 90's, Oxford, U.K., 1989.
26. Chen. P.: Annals of CIRP, 1992, 41/1, 59-62.
27. Cronjager, L. and Meister, D.: Annals of CIRP, 1992, 41/1, 63-67.
28. Brun, M..K. and Lee, M.: Wear, 1985, 104, 21-29.
29. Lane, C. T.: In Advanced Composite Materials 93: Proc. Int Conf. on Advanced Materials, (Ed. Chandra, T. and Dingra, A.K.), Pub. The Materials, Metals and Materials Society, Warrendale, PA., USA, 1993, 1113-1118.
30. Hale, T.E. and Graham, D. E.: In Cutting Tool Materials, Publ. ASM, USA, 1981, 56-61.
31. Wick, C.: Coatings improve tool life and increase productivity, Manufact Eng., 1986, 26-31.
32. Chadwick, G..A. and Heath, P..J.: Metals and Materials, **** 1990, 73-76.
33. Aspinwall, D.K: 1st. Int. Material Removal Conf., Detroit, USA, 1983, MR83-201, ****
34. Aspinwall, D.K.: Publ. Van Moppes Diamond Tools Ltd, Basingstoke, UK, 1985, 1-20.
35. Chambers, A.R. and Jarmaker, I.: Proc Congress of CIMTEC VII, Montecatinis, 1990, 2803-2809.
36. Lane C. and Bunting, J.: In Machining of Composites II, (Ed. Srivatsan, T.S. and Bowden, D. M. and Lane, C. T.), Publ. ASM, Ohio, USA, 1993, 9-13
37. Vajpayee, S.: Wear, 1981, 70, 165-175.
38. Monaghan, J. and O'Reilly, P.: J. Mater. Process. Technol., 1992, 33, 469-480.
39. Schaefer, W.H. and Christian, J.L.: Tech Report No AFML-TR-69-36, Air Force Materials Laboratory, USA, 1969, 3.
40. Waldrop, P.S.: Metal matrix composites, manufacturing challenges, (Ed. Coleman, J.R.), SME Conf., Los Angeles, USA, 1986, 342-351.
41. Liskay, G.G. and Brownfield, C.D.: A Boron-Aluminium shelf for the shuttle orbiter, Report of Rockwell Int, Space Division, CA., USA, 1975.
42. Miller, M.F., Christian, J.L. and Wennhold, W.F.: NASA Contract: NASA-27738, USA, 1973.
43. Miller, M. F., Schaefer, W. H. and Weisinger, M.D.: Tech. Report No. AFML-TR-71-181, Air Force Materials Laboratory, USA, 1971.
44. Vaccari, J.A.: American Machinist, March 1986, 95-97.
45. Cronjager, L. and Meister, D.: Composite Mater, Technol., ASME, 1991, 37, 185-189.
46. Wise, M.L.H.: Mater. Sci. Technol., 1986, 2, 59-68.
47. Ricci, W.S.: Machining metal matrix composites, SME Conf. Composites in Manufacturing, California, USA, 1987, MR87-827, 1-10.
48. Monaghan, J., Sheridan, C. and Brazil, D.: Proc. IMF-11, Univ. College Galway, Irl, 1995, 41-49.
49. Hung, N.P., Jana, S., Yang, L.J. and Heng, C.H.: ASME, 1995, AMD-Vol.208/MD-Vol. 59, 87-92.
50. Lau, W.S., Yue, T. M. and Wang, M.: Annals CIRP, 1994, 43/1, 177-180.
51. Benhadded, M.O., McGeough, J.A. and Barker, M.B.: Dept. of Mech. Eng., Edinburgh Univ., 1991, 1-14.
52. O' Donoghue, H.: Project Report, Dublin Institute of Technonogy, 1992, 1-65.
53. Ramarao, P.V. and Farugi, M. A.: Precision Eng., April 1982, 4/2, 111-113.
54. Crookall, J.R.: Annals CIRP, 1973, 20/2, 113-118.
55. Monaghan, J.: Proc. IMF-11, Univ. College Galway, 1995, 25-36.
56. Brazil, D. and Monaghan, J.: Proc. IMC-12, Univ. College Cork, Irl, 1995, 177-184.
57. Thebaud, F., Da Silva, H.E., Suery, R. and Bretheau, T.: Proc Conf. Interfacial Phenomena in Composites, Newport, Rhode Island, USA, 1992, 179-184.
58. Tsuchiya, K., Weertman, J.R. and Luton, M.J.: TMS, Indianapolis, USA, 1989, 45-58.
59. Vasudevan, A.K., Richmond, O., Zok, F. and Embury, J.D.: Mater. Sci. Eng., 1989, A107, 63-68.