Decision support through mass and energy flow management in the vehicle-refinishing sector

Journal of Industrial Ecology

Volumn 8, Issue 4, 2004, Pages 173-187

  Geldermann, Jutta ^a,b   Rentz, Otto ^a  

^a UNIVERSITY OF KARLSRUHE   (Germany)

^b Institute for Industrial Production   (Germany)

Author keywords

Automobile coating; Decision modeling; Emission reduction life cycle assessment (LCA); Process model; Small and medium sized enterprises (SME); Volatile organic compounds (VOCs)

Indexed keywords

COATING-APPLICATION INDUSTRY; ENERGY FLOW MANAGEMENT; WATER-BASED COATINGS;

DECISION SUPPORT SYSTEMS; ECOLOGY; GAS EMISSIONS; PLANNING; VEHICLES;

ENVIRONMENTAL PROTECTION;

AUTOMOBILE INDUSTRY; DECISION SUPPORT SYSTEM; EMISSION CONTROL; INDUSTRIAL EMISSION; SOLVENT;

EID: 17644394273     PISSN: 10881980     EISSN: 15309290     Source Type: Journal    
DOI: 10.1162/1088198043630504     Document Type: Review

References (28)

1. Avci, N., N. H. Peters, J. Geldermann, and O. Rentz. 2001. Dynamic mass flow optimisation as decision support for environmental policy. Paper presented at SETAC Europe 11th Annual Meeting, Madrid. May 6-10.
2. Blümel, F. 2001. Stoffstrommanagement in der handwerklichen Autoreparaturlackierung - Zur Planung und Steuerung betrieblicher Stoff- und Energieströme in kleinen und mittleren Unternehmen der Autoreparaturlackierung. [Mass and energy flow management in vehicle refinishing - On planning and managing of mass and energy flows in small and medium sized body shops.] Düsseldorf: VDI Verlag.
3. CEPE (Conseil Européen de l'Industrie des Peintures, des Encres d'Imprimerie et des Couleurs d'Art) 2000. Technology guidelines for vehicle refinishes. Brussels: CEPE.
4. Environment Canada. 2001. Pollution prevention planning handbook. 〈www.ec.gc.ca/NOPP/P2TUT/pdf/hand_all_e.pdf〉. Accessed August, 2004.
5. ESIG (European Solvents Industry Group). 2002. Questions and answers relative to the EU Solvents Emissions Directive. Brussels: ESIG.
6. Geldermann, J., H. Schollenberger, and O. Rentz. 2002. Linking mass and energy flow analysis with time management. In Environmental communication in the information society, Part 2, Proceedings of the 16th International Conference of Informatics for Environmental Protection, edited by W. Pillmann and K. Tochtermann. Wien, Austria: IGU/ISEP.
7. Geldermann, J., H. Schollenberger, S. Wenzel, and O. Rentz. 2002. Integrated scenario analysis of metal COATing (ISACOAT). Paper presented at SETAC Europe 12th Annual Meeting 2002, Vienna. May 12-16.
8. Girault, C., and R. Valk. 2003. Petri nets for systems engineering: A guide to modeling, verification, and applications. Heidelberg, Germany: Springer.
9. Guinée, J. B., M. Gorrée, R. Heijungs, G. Huppes, R. Kleijn, A. de Koning, L. van Oers, A. Wegener Sleeswijk, S. Suh, H. A. Udo de Haes, H. de Bruijn, R. Van Duin, and M. A. J. Huijbregts. 2002. Handbook on life cycle assessment - Operational guide to the ISO standards. Dordrecht, The Netherlands: Kluwer Academic Publishers.
10. Hennemann, A. 1994. Betriebswirtschaftskhre für Fahrzeuglackierbetriebe. [Business administration for vehicle refinishing body shops.] München, Germany: Audin.
11. Möller, A., and A. Rolf. 1995. Methodische Ansätze zur Erstellung von Stoffstromanalyse. [Methodological approaches for mass flow analyses.] In Stoffstromanalysen in Ökobilanzen und Öko-Audits, edited by M. Schmidt and A. Schorb. Berlin: Springer.
12. Mugler, J. 1998. Betriebswirtschaftslehre der Klein- und Mittelbetriebe. [Business administration of small and medium sized companies.] Heidelberg, Germany: Springer.
13. Müller, J. 2000. Vorgehensweise bei Materialschichtdickenmessungen. [Approaches for material thickness measurements.] Frankfurt, Germany: Institut für Fahrzeuglackierung.
14. Ondrascheck, D. 2002. Jahrbuch "Besser Lackieren." [Almanac, "better coating."]. Hannover, Germany: Vinzenz.
15. Owen, J. W. 1996. LCA impact assessment categories - Technical feasibility and accuracy. International Journal of Life Cycle Assessment 1(1): 151-159.
16. REFA (Verband für Arbeitsstudien und Betriebsorganisation). 1992. Methodenlehre des Arbeitsstudiums. [Methods of ergonomics.] München, Germany: Hanser.
17. Reinecke, M. 1997. Ein Eindruck von Theorie und Anwendbarkeit der Petri-Netze. [Theory and applicability of Petri-nets.] In Stoffstromanalyse und -bewertung [Mass flow analysis and assessment], edited by M. Matthies. Osnabrück, Germany: Institut für Umweltsystemforschung der Universität Osnabrück.
18. Rentz, O., S. Nunge, M. Laforsch, and T. Holtmann. 1999. Technical background document for the actualization and assessment of UN/ECE protocols related to the abatement of the transboundary transport of volatile organic compounds from stationary sources. Report of the task force on the assessment of abatement options/techniques for volatile organic compounds from stationary sources, on behalf of the German Federal Ministry for the Environment, Nature Conservation, and Nuclear Safety and the Federal Environmental Agency. Karlsruhe, Germany.
19. Rentz, O., S. Nunge, and J. Geldermann. 2000. Einführung eines innerbetrieblichen Energie- und Stoffstrommanagements bei einem mittelständischen Industrielackierbetrieb für Kleinteile in Baden-Württemberg. [Introducing mass and energy flow management at a job coater, a medium sized industrial company.] Karlsruhe, Germany.
20. Rentz, O., N. Avci, and J. Geldermann. 2001. Lösemittelbilanz und Reduzierungsplan für kleine und mittlere Unternehmen der KFZ-Reparaturlackierung. [Solvent management plan according to the EU-Solvent Directive (1999/13/EC) in small and medium-sized car refinishing body shops.] Stuttgart, Germany: Ministerium für Umwelt und Verkehr Baden- Württemberg.
21. Rentz, O., N. Avci, N. H. Peters, and J. Geldermann. 2001. Entwicklung eines praxisorientierten Leitfadens zum verbesserten Einsatz von Wasserlacken in kleinen und mittleren Unternehmen der Kfz-Reparaturlackierung. [Development of practice-oriented guidelines for improved use of water-based coatings in the vehicle refinishing sector.] Stuttgart, Germany: Report for the Ministry of the Environment and Traffic.
22. Rentz, O., H. Schollenberger, and J. Geldermann. 2003. Arbeitszeitstudie für die Autoreparaturlackierung in Herstellerwerkstätten - Projekt im Auftrag des VDA unter Beteiligung der Marken Audi, BMW, Ford, Opel, Porsche und VW. [Time and motion studies in vehicle refinishing, on behalf of the German Association of Car Producers.] Karlsruhe, Germany.
23. Rentz, O., N. H. Peters, S. Nunge, and J. Geldermann. 2003. Bericht über Beste Verfügbare Techniken (BVT) in den Bereichen der Lack- und Klebstoffanwendung in Deutschland. [Reports on the best available techniques (BAT) in the sectors of paint and adhesive application in Germany.] Düsseldorf, Germany: VDI-Verlag.
24. Ritchie, A., B. Ollerenshaw, R. Hanny, F. Reynolds, and H. Conlin. 2000. Reducing VOC emissions from the vehicle refinishing sector. Brussels, Belgium: European Commission.
25. Roelant, G. J., A. J. Kemppainen, and D. R. Shonnard. 2004. Assessment of the Automobile Assembly Paint Process for Energy, Environmental, and Economic Improvement. Journal of Industrial Ecology 8(1-2): 173-191.
26. Rosenstengel, B., and U. Wienand. 1991. PetriNetze - Eine amuendungsorientierte Einführung. [Petri-nets - An application-oriented introduction.] 4th edition. Braunschweig, Germany: Vieweg.
27. Schollenberger, H., J. Geldermann, and O. Rentz. 2003. Analysis of time and motion studies in the sector of vehicle refinishing. Paper presented at 17th International Conference of Production Research, 3-7 August, Blacksburg, VA.
28. Winder, C., and P. J. Turner. 1992. Solvent exposure and related work practices amongst apprentice spray painters in automotive body repair workshops. Annals of Occupational Hygiene 36: 385-394.